Railroad & Railcar Spill Containment
Industry-leading UltraTech track pans, portable berms, and railcar mats — in stock, shipping nationwide. Protect your facility from costly spills, EPA fines, and SPCC violations.
Get a Custom Quote
Tell us your track length — we'll spec the right system.
Railroad Track Pan Products & Pricing
The full UltraTech track pan line — SPCC-compliant, modular, and installing without excavation or heavy equipment. Select a product category below.
53.5×53.5×6" center pan with grates. Includes 2 bulkhead fittings, 4 gaskets, 2 grates. Connects to unlimited pans for any track length.
53.5×27.5×6" side pan with grate. 1 bulkhead fitting, 2 gaskets, 1 grate. Angles to channel clean rain away from containment. Pair with center pan.
Complete 9-foot containment system. Includes 2 center pans, 4 side pans, all gaskets, fittings, and grates. Ready to install — no extra parts needed.
53×42.75×4.39" international-spec center pan. Designed for narrower track gauges outside North America. Same SPCC-compliant polyethylene construction.
Replacement right-side grate for UltraTech PE track pans. Slip-resistant diamond-plate surface. Drive-over rated when installed on compacted soil.
2ft plastic/steel rebar fasteners with protective caps. Anchors pans during installation. 20-piece pack covers a standard 9-foot system. No additional tools required.
High-strength non-porous fiberglass 20-foot center pan for permanent high-volume installations. Corrosion-resistant, pandrol compatible, optional PE grating.
Matching 20-foot composite fiberglass side pan. Interconnects with #7200 center pan to extend containment across any track length. Low-profile with railside gasket sealing.
PE center pan with LLDPE pellet-stop grating. Captures plastic pellets (nurdles) and resin from railroad tankers. Rail-side gasket prevents escape between pans and rails.
Matching PE side pan with LLDPE pellet-stop grating. Pairs with #7560. Polyethylene gasket sealing on all rail interfaces to prevent pellet loss.
20-foot fiberglass composite centre pellet pan. High-volume resin and pellet capture for permanent installations at tanker car unloading areas.
Matching 20-foot composite side pellet pan. Pairs with #7246 center pan for full-width pellet containment. Permanent installation design.
Add-on deflectors that redirect pellets toward the containment pan during unloading. Reduces pellet scatter and improves capture efficiency. Sold in packs of 5.
| Part # | Image | Product | Description | Price | Actions |
|---|---|---|---|---|---|
| #9572 |  |
Track Pan Grate — Right Grate | Black polyethylene right grate. Slip-resistant, drive-over rated. | $137.07 | Details → |
| #9584 |  |
Rebar Fasteners with Protective Caps | 2ft plastic/steel fasteners. 20-pack. Anchors pans during installation. | $112.64 | Details → |
| #7570 |  |
Pellet Deflector — 5 Pack | Redirects pellets toward containment pan. Improves capture rate. | $97.04 | Details → |
| #7220 |  |
Drain Manifold — Centre & Sides (Composite) | Below-grade drainage manifold for composite systems. Routes spills to oil/water separator or holding pond. | $482.19 | Details → |
| #7223 |  |
Drain Manifold — Centre Only (Composite) | Centre-only drain manifold for composite track pan systems. | $378.08 | Details → |
| #7225 |  |
Rail Gaskets — Composite Model | Replacement rail gaskets for composite track pan systems. Seals pan-to-rail interface. | $64.71 | Details → |
System Sizing Guide
Track pans are modular in 4½-foot increments and configure to virtually any length. Common system sizes and costs below.
| System Size | Best For | Center Pans (#9566) | Side Pans (#9576) | Total Units | Est. PE System Cost |
|---|---|---|---|---|---|
| 9-Foot | Nuisance drip / maintenance capture | 2 × $776.69 | 4 × $412.53 | 6 units | ~$3,203.50 |
| 40-Foot | Standard tanker car (35–60 ft) | 9 × $776.69 | 18 × $412.53 | 27 units | ~$14,415.75 |
| 60-Foot | Full locomotive or large tanker | 14 × $776.69 | 28 × $412.53 | 42 units | ~$22,423.50 |
| Custom | Any specific requirement | Configurable in any multiple of 4½ ft — straight or curved track | Call 800-474-5911 | ||
Volume discounts available — call 800-474-5911 for multi-unit orders and freight quotes.
SPCC & EPA Compliance Made Simple
UltraTech track pans are designed to help comply with the following rules & regulations:
SPCC rules require secondary containment for facilities that store or transfer oil above threshold limits. UltraTech track pans are expressly designed to satisfy these requirements at rail loading and off-loading facilities.
Facilities subject to EPA stormwater permits (SWPPP) must demonstrate hazardous material containment. Our track pan systems provide documented, auditable secondary containment that satisfies BMP requirements for rail sidings.
Rail loading areas see high foot and vehicle traffic. All UltraTech track pans feature built-in grating with a slip-resistant diamond-plate texture rated for vehicle drive-over. Employees never walk on exposed liquid. NY State Chemical Bulk Storage Regulation Section 599.17c also satisfied.
Resources & Documentation
Official UltraTech installation guides, worksheets, and technical documents for the Ultra-Track Pan product line.
Need a spec sheet for your compliance documentation? Call our team and we'll send what you need.
📞 800-474-5911How We Compare to Other Suppliers
| Feature | Spill 911 | Other Online Suppliers | Direct from Manufacturer |
|---|---|---|---|
| GSA Contract Pricing | ✔ Yes — GSA Contract Holder | ✗ Not available | ~ Limited |
| In-Stock / Same-Day Ship | ✔ In-stock ships same day | ~ Often drop-ship | ~ Lead times apply |
| 24/7 Technical Support | ✔ 800-474-5911 anytime | ✗ Business hours only | ~ Sales team only |
| Volume / Project Discounts | ✔ Price-match + volume tiers | ✗ Fixed pricing | ~ Complex process |
| SPCC Compliance Expertise | ✔ 30 years of experience | ✗ Product only | ✔ Yes |
| 100% Satisfaction Guarantee | ✔ Full guarantee | ~ Varies | ~ Warranty only |
| Full MRO Safety Catalog | ✔ Complete range | ~ Specialized | ✗ Single line |
UltraTech Polyethylene vs Metal Containment
- Easy Installation: No forklifts, cranes, or backhoes. Metal rake, shovel, and bar clamps are all you need.
- Patented Gasket System: Closed-cell PE foam seals against the rail — eliminating the key leak point metal pans can't address.
- Chemical Resistance: Polyethylene outperforms metal against acids, caustics, corrosives, solvents, oils, and diesel. Zero rust.
- Grating Included: All pans ship with grating — employees never walk in spilled product. Drive-over rated.
- Modular & Replaceable: Damage one section? Replace only that piece — not the whole system.
- Patented Flow-Through: Bulkhead fittings route spills pan-to-pan down to oil/water separators or holding ponds.
- Low Maintenance: Visual gasket inspection every 6 months. No rust treatment, no repainting.
- UV Stabilized: UV inhibitor in polyethylene resin for the full 20–30 year work life.
Quick Spec Reference
Frequently Asked Questions
Have a question not listed here? Our technical team is available 24/7.
📞 Call 800-474-5911More to Explore…
Trusted by Facilities Nationwide
"The system arrived exactly as specified. Our maintenance crew had the 40-foot setup in place in a single day. Spill 911 helped us size the right configuration for our tanker loading facility."
"Needed GSA pricing for our government facility — Spill 911 sorted the paperwork within the hour. The system passed our compliance audit with zero findings. 24/7 support is genuinely staffed."
"Three years in and the pans look like new. Zero rust, zero cracking, gaskets still seal tight. Placed a repeat order for our rail siding expansion — the volume pricing beat every other quote."
Ready to Protect Your Rail Facility?
Expert guidance, volume pricing, and SPCC-compliant systems shipped nationwide — backed by 30 years of safety expertise.
