Vestil

Manufacturer: Vestil, Manufacturer Part Number: ZLTT-4472-4-48 The zero lift & tilt table is designed to lift or tilt products to an ergonomic working position, reducing operator bending. Products may be loaded and unloaded with the use of a standard hand pallet truck. There is no pit mounting required. Maximum tilt angle is 45 degrees. Lift and tilt is controlled separately. Remote power unit with hand-held control is standard. 45 Degrees maximum tilt angle positions loads to optimum ergonomic positions Lift and tilt options are controlled separately allowing a precise working angle for the employee No pit mounting required makes installation quick and easy Products may be loaded and unloaded by a standard hand pallet truck when fork trucks aren't available Capacity: 4,000 lbs., Platform Size: 44" x 72", Raised Height: 48", Overall Size: 69"W x 79"L x 24"H – Zero Lift & Tilt Table – Designed to lift or tilt products to an ergonomic working position, reducing operator bending. Products may be loaded and unloaded with the use of a standard hand pallet truck. No pit mounting required! Maximum tilt angle is 45°. Lift and tilt controlled separately. Remote power unit with hand–held control standard.

Manufacturer: Vestil, Manufacturer Part Number: HLD-116-10-PDump Height (Min./Max.): 60"/116", Rotation Height: 195", Level Height: 87", Capacity: 1,000 lbs., Frame: 44"W x 77"L – Lift–And–Dump Hydraulic Drum Dumpers – The Lift–and–Dump Hydraulic Drum Dumper is what you need to dump drums at variable heights. The HLD works similarly to the HDD but includes a lift cylinder that allows you to dump at various heights. Features a (4) push button pendant which allows the operator full independent control of both lift height and the dump angle. 120V 1–phase power standard. Portable with a 40° dump angle.

Manufacturer: Vestil, Manufacturer Part Number: HLD-116-15-PDump Height (Min./Max.): 60"/116", Rotation Height: 195", Level Height: 87", Capacity: 1,500 lbs., Frame: 44"W x 77"L – Lift–And–Dump Hydraulic Drum Dumpers – The Lift–and–Dump Hydraulic Drum Dumper is what you need to dump drums at variable heights. The HLD works similarly to the HDD but includes a lift cylinder that allows you to dump at various heights. Features a (4) push button pendant which allows the operator full independent control of both lift height and the dump angle. 120V 1–phase power standard. Portable with a 40° dump angle.

Manufacturer: Vestil, Manufacturer Part Number: EHLTG-52-SBGround Lift Table – Option – Steel Rollover Bridge for 44" Wide Decks, 2,000 lb. Capacity units only.

Manufacturer: Vestil, Manufacturer Part Number: LP-4000T-45-SSUniform Capacity (lbs.): 4,000, Usable Diameter (in.): 45, Effective Ramping Length (in.): 4–3/8, Slope Degree: 11, Stainless Steel Type: 304, Starting Force (lbs.): 35, Maintaining Force (lbs.): 25 – The Thin Spin is a pallet truck loadable carousel. When confronted with minimum floor space and only a hand pallet truck, the Thin Spin low–profile carousel is ideal for loading and unloading pallet applications. The unit is pallet truck loadable because of its sleek overall height. The detent lock restricts carousel rotation when not in use.

Manufacturer: Vestil, Manufacturer Part Number: PG-C-045Pipe Style: Cast Iron, Working Load Limit: 450 lbs., Pipe Outside Diameter: 4.00" – Heavy–Duty Pipe Grab – Designed for lifting pipe (cast iron or steel) with overhead lifting device. Automatic operation allows for easy use by anyone. Loads must be centered and guided during lifting operations. Heavy–duty steel construction with painted finish.

Manufacturer: Vestil, Manufacturer Part Number: PG-S-045Pipe Style: Steel, Working Load Limit: 450 lbs., Pipe Outside Diameter: 3.50" – Heavy–Duty Pipe Grab – Designed for lifting pipe (cast iron or steel) with overhead lifting device. Automatic operation allows for easy use by anyone. Loads must be centered and guided during lifting operations. Heavy–duty steel construction with painted finish.

Manufacturer: Vestil, Manufacturer Part Number: OBOL-47-4.5Height: 47", Outside Diameter: 4–1/2", Base Plate: 8" x 8 " – Offset Steel Bollards – Unique design features offset base plate that won't interfere with Traffic. The 8" x 8" base plate includes (4) pre–drilled mounting holes (mounting hardware is sold separately). Removable rubber top cap and black/yellow safety tape included. Heavy–duty welded steel construction with a powder coat safety yellow finish is standard.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-48Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 48" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-48Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 48" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-48Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. 48" Length.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-48-PAccommodates Fork Width: 4", Fork Extension Inside Width: 4", Length: 48", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-48-PAccommodates Fork Width: 5", Fork Extension Inside Width: 5", Length: 48", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-48-PAccommodates Fork Width: 6", Fork Extension Inside Width: 6", Length: 48", Maximum Fork Thickness: 2", Style: Pin – Fork Extensions – Provide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with cast steel tips prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48" existing forks, the fork extension should not exceed 72"). Maximum capacity is 4,000 pounds evenly distributed. Pin Style: Remove pin and lay extension over fork or drive fork into the extension. Re–insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: HDP-2-48Capacity: 2,000 lbs., Fork Length: 48", Overall Fork Width: 25", Fork Size: 2"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: HDP-4-48Capacity: 4,000 lbs., Fork Length: 48", Overall Fork Width: 25", Fork Size: 4"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: HDP-6-48Capacity: 6,000 lbs., Fork Length: 48", Overall Fork Width: 27", Fork Size: 5"W x 2"H, Bail: 4"W x 7"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-48-5.5Usable Height: 48", Overall Height: 58", Outside Diameter: 5–1/2" – Pour In Place Bollards – Make your bollards permanent by setting them in concrete. The extra length of the Pour in Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with welded anchoring tabs and a removable cap so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility.

Manufacturer: Vestil, Manufacturer Part Number: BOL-R-48-5.5Usable Height 48", Overall Height: 58", Diameter: 5" – Removable Bollard – The Removable Bollard comes with a sleeve that can be set in concrete to hold the bollard. When access is needed into an area that is protected by the bollard, simply lift the bollard out of the sleeve. Replace the bollard in its sleeve to reinstate the protective barrier. Powder coated yellow for high visibility. Sleeve is included.

Manufacturer: Vestil, Manufacturer Part Number: SQ-48-HWRSquare Tube Diameter (in.): 1–5/8, Mid–Rail Height (in.): 21, Section Style: Rigid without Toeboard, Finish: Powder Coat Yellow, Bolt Holes (quantity): 8 – Steel Square Safety Handrail provides an economical way to protect people and machinery. Applications include loading docks, floor openings, walkways, and mezzanines. Highly visible safety yellow powder coat finish, hardware included.

Manufacturer: Vestil, Manufacturer Part Number: ASP-48-AUniform Capacity (lbs.): 500, Individual Step Depth (in.): 12, Top Step Height from bottom Step Fixed (in.): 7, First Step Adjustment Minimum (in.): 6, First Step Adjustment Maximum (in.): 7–1/2, Second Step Adjustment Minimum (in.): 13, Second Step Adjustment Maximum (in.): 14–1/2, Construction: Aluminum – The Adjustable Step–Mate Stand can be used as either a comfortable worker platform or a semi–permanent step. The serrated surface ensures safe footing. The legs adjust individually by screwing them into or out of the leg base. The unit has a welded construction

Manufacturer: Vestil, Manufacturer Part Number: EH-4824Capacity: 8,200 lbs., Plate Thickness: ", Width: 48", Length: 24", Height Differential: 3" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-4824Capacity: 5,200 lbs., Width: 48", Length: 24", Height Difference: 3", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: ASP-48-SSUniform Capacity (lbs.): 500, Individual Step Depth (in.): 12, Top Step Height from bottom Step Fixed (in.): 7, First Step Adjustment Minimum (in.): 6, First Step Adjustment Maximum (in.): 7–1/2, Second Step Adjustment Minimum (in.): 13, Second Step Adjustment Maximum (in.): 14–1/2, Construction: Stainless Steel – The Adjustable Step–Mate Stand can be used as either a comfortable worker platform or a semi–permanent step. The serrated surface ensures safe footing. The legs adjust individually by screwing them into or out of the leg base. The unit has a welded construction