Vestil

Manufacturer: Vestil, Manufacturer Part Number: DH-PH4-3472Platform Size (W x L): 34" x 72", Shelf Clearance: 22", Top Shelf Height: 36", Total Capacity: 4,000 lbs – Ergo Handle Cart – The Ergo–Handle Cart is constructed of heavy–duty steel to handle loads up to 4,000 pounds. The patented ergonomic handle decreases fatigue by allowing the operator to easily maneuver the cart. Rolls on 2 rigid, 2 swivel 8" x 2" casters with roller bearings. Invertible bolt–on chrome ergonomic handle designed for individual height comfort and handling of long loads.

Manufacturer: Vestil, Manufacturer Part Number: OBOL-35-4.5Height: 35", Outside Diameter: 4–1/2", Base Plate: 8" x 8 " – Offset Steel Bollards – Unique design features offset base plate that won't interfere with Traffic. The 8" x 8" base plate includes (4) pre–drilled mounting holes (mounting hardware is sold separately). Removable rubber top cap and black/yellow safety tape included. Heavy–duty welded steel construction with a powder coat safety yellow finish is standard.

Manufacturer: Vestil, Manufacturer Part Number: DOME-36The Dome Mirror is perfect for any high traffic industrial area. The crisp clear reflection allows for additional safety when entering blind spots. A lightweight design enables mirrors to be hung in a variety of places ensuring surveillance in the most hazardous of places. Hanging hardware is included.

Manufacturer: Vestil, Manufacturer Part Number: HDP-CLRod Length: 36", Rod Diameter: 2–3/4", Overall Width: 21", Capacity: 1500 lbs. – Coil Lifter – The hoist mounted Coil Lifter has adjustable balance points to accommodate different sized coils. Coils can be up to 90" in diameter and weigh as much as 1,500 pounds. The top adjusting bail allows the operator to insure level transportation of load. Coil lifer is compact for easy storage. Steel construction. Painted finish. Lifting ring and hoist sold separately.

Manufacturer: Vestil, Manufacturer Part Number: HDP-2-36Capacity: 2,000 lbs., Fork Length: 36", Overall Fork Width: 25", Fork Size: 2"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: HDP-4-36Capacity: 4,000 lbs., Fork Length: 36", Overall Fork Width: 25", Fork Size: 3"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-36-5.5Usable Height: 36", Overall Height: 46", Outside Diameter: 5 1/2" – Pour In Place Bollard – Make your bollards permanent by setting them in concrete. The extra length of the Pour in Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with welded anchoring tabs and a removable cap so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility.

Manufacturer: Vestil, Manufacturer Part Number: BOL-R-36-5.5Usable Height 36", Overall Height: 46", Diameter: 5" – Removable Bollard – The Removable Bollard comes with a sleeve that can be set in concrete to hold the bollard. When access is needed into an area that is protected by the bollard, simply lift the bollard out of the sleeve. Replace the bollard in its sleeve to reinstate the protective barrier. Powder coated yellow for high visibility. Sleeve is included.

Manufacturer: Vestil, Manufacturer Part Number: FAL-3610-50Overall Width: 36", Overall Length: 10', Capacity: 5,000 lbs., Maximum Working Height: 30" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Vestil, Manufacturer Part Number: FWR-3610-50Overall Width: 36", Overall Length: 10', Capacity: 3,000 lbs., Maximum Working Height: 30" – Fiberglass Walk Ramp – Load and unload equipment from trucks using these Heavy–duty Fiberglass Walk Ramps. Reinforced fiberglass construction provides up to 3,000 pounds capacity. Abrasive surface provides good traction in wet or dry conditions. 1" high curb on each side of ramp. Not for use with fork trucks or pallet trucks.

Manufacturer: Vestil, Manufacturer Part Number: FAL-3612-50Overall Width: 36", Overall Length: 12', Capacity: 5,000 lbs., Maximum Working Height: 35" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Vestil, Manufacturer Part Number: FWR-3612-50Overall Width: 36", Overall Length: 12', Capacity: 3,000 lbs., Maximum Working Height: 35" – Fiberglass Walk Ramp – Load and unload equipment from trucks using these Heavy–duty Fiberglass Walk Ramps. Reinforced fiberglass construction provides up to 3,000 pounds capacity. Abrasive surface provides good traction in wet or dry conditions. 1" high curb on each side of ramp. Not for use with fork trucks or pallet trucks.

Manufacturer: Vestil, Manufacturer Part Number: FAL-3614-50Overall Width: 36", Overall Length: 14', Capacity: 5,000 lbs., Maximum Working Height: 35" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Vestil, Manufacturer Part Number: FWR-3614-50Overall Width: 36", Overall Length: 14', Capacity: 3,000 lbs., Maximum Working Height: 45" – Fiberglass Walk Ramp – Load and unload equipment from trucks using these Heavy–duty Fiberglass Walk Ramps. Reinforced fiberglass construction provides up to 3,000 pounds capacity. Abrasive surface provides good traction in wet or dry conditions. 1" high curb on each side of ramp. Not for use with fork trucks or pallet trucks.

Manufacturer: Vestil, Manufacturer Part Number: FAL-3616-50Overall Width: 36", Overall Length: 16', Capacity: 5,000 lbs., Maximum Working Height: 50" – Fiberglass Autoloader Ramp – The Autoloader Ramp can be separated in half to provide two ramps that may be used to load automobiles and other vehicles. Each half is 18" wide and handles 2,500 pounds. To separate simply remove center hinge pins.

Manufacturer: Vestil, Manufacturer Part Number: ASP-36-AUniform Capacity (lbs.): 500, Individual Step Depth (in.): 12, Top Step Height from bottom Step Fixed (in.): 7, First Step Adjustment Minimum (in.): 6, First Step Adjustment Maximum (in.): 7–1/2, Second Step Adjustment Minimum (in.): 13, Second Step Adjustment Maximum (in.): 14–1/2, Construction: Aluminum – The Adjustable Step–Mate Stand can be used as either a comfortable worker platform or a semi–permanent step. The serrated surface ensures safe footing. The legs adjust individually by screwing them into or out of the leg base. The unit has a welded construction

Manufacturer: Vestil, Manufacturer Part Number: EH-3624Capacity: 6,200 lbs., Plate Thickness: ", Width: 36", Length: 24", Height Differential: 3" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: A-3624Capacity: 500 lbs, Width: 36", Length: 24", Height Diff: 3" – Aluminum Hand Truck Dockplates – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: AH-3624Capacity: 700 lbs., Dimensions: 36"W x 24"L x 3"H, Plate Thickness: 5/16" – Aluminum Hand Truck Dockplate – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: ASP-36-SSUniform Capacity (lbs.): 500, Individual Step Depth (in.): 12, Top Step Height from bottom Step Fixed (in.): 7, First Step Adjustment Minimum (in.): 6, First Step Adjustment Maximum (in.): 7–1/2, Second Step Adjustment Minimum (in.): 13, Second Step Adjustment Maximum (in.): 14–1/2, Construction: Stainless Steel – The Adjustable Step–Mate Stand can be used as either a comfortable worker platform or a semi–permanent step. The serrated surface ensures safe footing. The legs adjust individually by screwing them into or out of the leg base. The unit has a welded construction

Manufacturer: Vestil, Manufacturer Part Number: HPRO-RF-36-24-4Guard Diameter (in.): 4–1/2, Base Plate Width (in.): 8, Base Plate Length (in.): 8, Construction: Steel, Finish: Powder Coat Yellow, Bolt Holes (quantity): 8 – The surface–mounted steel base plates allow for quick and easy removal of this High Profile Machinery Guard. May be used either indoors or outdoors. Steel base plates are bolted in place. Guard is easily inserted into base plates then locked into place. Base plate includes four (4) pre–drilled mounting holes. Welded steel construction with yellow powder coat finish.

Manufacturer: Vestil, Manufacturer Part Number: EH-3630Capacity: 5,100 lbs., Plate Thickness: ", Width: 36", Length: 30", Height Differential: 4" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-3630Capacity: 3,000 lbs., Width: 36", Length: 30", Height Difference: 4", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: A-3630Capacity: 500 lbs, Width: 36", Length: 30", Height Diff: 4" – Aluminum Hand Truck Dockplates – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.