Vestil

Manufacturer: Vestil, Manufacturer Part Number: D-75-MD-YELUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 3/4, Fork Pocket Center (in.): 18, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 28–1/4, Usable Chute Length (in.): 54–1/2, Usable Chute Height (in.): 32–1/2, Finish: Powder Coat Yellow – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom.

Manufacturer: Vestil, Manufacturer Part Number: CNVX-30Description: Round, Overall Diameter: 30", Distance Covered: 30' – Industrial Acrylic Convex Mirrors – Lightweight design made from the nest quality materials, using Grade A Optical Acrylic. Comes standard with hanging hardware.

Manufacturer: Vestil, Manufacturer Part Number: SME-30Blade Diameter: 30", Motor HP: 1/4, AMPS High: 2.7, CFM High: 7,900, CFM Low: 6,000 – Shutter Mounted Exhaust Fans – Inside–building installation only with vents outside. Eliminate need for external framing and shutter. Ideally suited for thin wall buildings. Units are 120V, 1 phase totally enclosed and permanently lubricated. Pull chain switch. No cord. Junction box provided for direct wiring. Meets OSHA standards and is UL listed.

Manufacturer: Vestil, Manufacturer Part Number: FWR-3010-50Overall Width: 30", Overall Length: 10', Capacity: 3,000 lbs., Maximum Working Height: 30" – Fiberglass Walk Ramp – Load and unload equipment from trucks using these Heavy–duty Fiberglass Walk Ramps. Reinforced fiberglass construction provides up to 3,000 pounds capacity. Abrasive surface provides good traction in wet or dry conditions. 1" high curb on each side of ramp. Not for use with fork trucks or pallet trucks.

Manufacturer: Vestil, Manufacturer Part Number: FWR-3012-50Overall Width: 30", Overall Length: 12', Capacity: 3,000 lbs., Maximum Working Height: 35" – Fiberglass Walk Ramp – Load and unload equipment from trucks using these Heavy–duty Fiberglass Walk Ramps. Reinforced fiberglass construction provides up to 3,000 pounds capacity. Abrasive surface provides good traction in wet or dry conditions. 1" high curb on each side of ramp. Not for use with fork trucks or pallet trucks.

Manufacturer: Vestil, Manufacturer Part Number: LDLT-30120Capacity: 2,000 lbs., Platform Size: 30"W x 120"L, Raised Height: 48", Lowered Height: 31" – Long Deck Cart – Perfect for sheet and strip handling, ergonomic load positioning and handling long awkward material loads. Platform height is adjusted with manual hydraulic foot pump. Structural steel base helps to distribute the load evenly. Unit comes standard with (4) swivel 5" x 2" polyurethane casters and dual floor locks.

Manufacturer: Vestil, Manufacturer Part Number: EH-3024Capacity: 5,200 lbs., Plate Thickness: 1/2", Width: 30", Length: 24", Height Differential: 3" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-3024Capacity: 3,000 lbs., Width: 30", Length: 24", Height Difference: 3", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: A-3024Capacity: 500 lbs, Width: 30", Length: 24", Height Diff: 3" – Aluminum Hand Truck Dockplates – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: AH-3024Aluminum Hand Truck Dockplate – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: EH-3030Capacity: 4,100 lbs., Plate Thickness: ", Width: 30", Length: 30", Height Differential: 4" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: A-3030Capacity: 500 lbs, Width: 30", Length: 30", Height Diff: 4" – Aluminum Hand Truck Dockplates – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: AH-3030Capacity: 700 lbs., Dimensions: 30"W x 30"L x 4"H, Plate Thickness: 5/16" – Aluminum Hand Truck Dockplate – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: ETS-840-30Capacity: 840 lbs., Platform Size: 30"L x 30"W, Service Range: 15" to 38", Overall Size: 31"W x 38"L x 52"H, Caster Size: 4" x 2" – Self–Elevating Spring Tables – Designed to automatically raise or lower as materials are removed or added to the platform, allows these tables to keep material at an ergonomic work height. These tables increase productivity while reducing potentially harmful bending and twisting motions. The counter balance springs can easily be added or removed to adjust weight–to–height sensitivity. This feature allows the user to conveniently set the table to fit each application.

Manufacturer: Vestil, Manufacturer Part Number: EH-3036Capacity: 3,500 lbs., Plate Thickness: ", Width: 30", Length: 36", Height Differential: 5" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: AHTD-3036Overall Size: 30"W x 36"L, 5" Height Differential, Capacity: 800 Lbs. – Aluminum Hand Truck Dockboards – These dockboards are lightweight and can be carried and positioned by one person. Provides a safe and convenient bridge between dock and truck. Welded aluminum diamond tread surface and beveled edges provide safe and smooth entry and exit. The bend is designed to keep ramp edges flush with dock surface and truck floor. Equipped with bolted locking legs. Full length aluminum curbs provide hand holds and reduce chance of roll off. Designed for use with two wheel hand trucks. 3/16" plate thickness. Manufactured in compliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: A-3036Capacity: 500 lbs, Width: 30", Length: 36", Height Diff: 5" – Aluminum Hand Truck Dockplates – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: AH-3036Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.

Manufacturer: Vestil, Manufacturer Part Number: HT-20-3036-DCCapacity: 2,000 lbs., Platform Size: 30"W x 36"L, Service Range: 54" to 36", Number of Posts: 4, Caster Size: 6" x 2" Phenolic, Operation: 12V DC Power – Hydraulic Post Table – Built for heavy duty shop use such as lifting dies and castings, moving machine parts, positioning welder's work, leveling feed material for pump presses, conveyors and press brakes, and similar material handling jobs. Posts are telescoping to help stabilize and support loads during operation. All foot pumps include a down speed control valve for safe platform lowering. Includes two rigid and two swivel casters with wheel brakes.

Manufacturer: Vestil, Manufacturer Part Number: HT-30-3036Platform Size: 30"W x 36"L, Capacity: 3,000 lbs., Service Range: 54" to 36", Number of Posts: 4, Caster Size/Type: 4" x 2"/Phenolic, Operation: Two–Speed Foot Pump – Manual Hydraulic Post Table – Foot–operated hydraulic post lift tables are built for heavy–duty shop use such as lifting dies and castings, moving machine parts, positioning welders' work, leveling feed material for pump presses, conveyors and press brakes, and similar material handling jobs. Posts are telescoping to help stabilize and support loads during operation. All foot pumps include a down speed control valve for safe platform lowering. Units include four swivel casters two swivel with total–locking brakes and two rigid.

Manufacturer: Vestil, Manufacturer Part Number: HT-40-3036Capacity: 4,000 lbs., Platform Size: 30"W x 36"L, Service Range: 54" to 36", Number of Posts: 4, Caster Size: 4" x 2" Phenolic, Operation: 2–speed foot pump – Hydraulic Post Table – Built for heavy duty shop use such as lifting dies and castings, moving machine parts, positioning welder's work, leveling feed material for pump presses, conveyors and press brakes, and similar material handling jobs. Posts are telescoping to help stabilize and support loads during operation. All foot pumps include a down speed control valve for safe platform lowering. Includes two rigid and two swivel casters with wheel brakes.

Manufacturer: Vestil, Manufacturer Part Number: MT-3036-LPCapacity: 2,000 lbs., Platform Size: 30"W x 36"L, Raised Height: 42", Lowered Height: 24" – Mechanical Post Table – Adjustable height portable tables are well suited for a wide variety of material handling applications. Moves smoothly on two rigid and two swivel 5" x 2" polyurethane casters. All welded steel construction (1/4" deck) and blue powder coat top. Provide positive height adjustment without downward drift. Features a two–speed manual gear mechanism to move heavy loads at 1/8" per crank rotation or lighter loads at 5/16" per crank rotation.

Manufacturer: Vestil, Manufacturer Part Number: MT-3042-HPCapacity: 2,000 lbs., Platform Size: 30"W x 42"L, Raised Height: 46", Lowered Height: 28" – Mechanical Post Table – Adjustable height portable tables are well suited for a wide variety of material handling applications. Moves smoothly on two rigid and two swivel 5" x 2" polyurethane casters. All welded steel construction (1/4" deck) and blue powder coat top. Provide positive height adjustment without downward drift. Features a two–speed manual gear mechanism to move heavy loads at 1/8" per crank rotation or lighter loads at 5/16" per crank rotation.

Manufacturer: Vestil, Manufacturer Part Number: MT-3042-LPCapacity: 2,000 lbs., Platform Size: 30"W x 42"L, Raised Height: 42", Lowered Height: 24" – Mechanical Post Table – Adjustable height portable tables are well suited for a wide variety of material handling applications. Moves smoothly on two rigid and two swivel 5" x 2" polyurethane casters. All welded steel construction (1/4" deck) and blue powder coat top. Provide positive height adjustment without downward drift. Features a two–speed manual gear mechanism to move heavy loads at 1/8" per crank rotation or lighter loads at 5/16" per crank rotation.