justrite

Manufacturer: Justrite, Manufacturer Part Number: 894524 Pesticides present a substantial danger to people and the environment when improperly stored. Pesticide safety cabinets allow segregation of  liquids stored at the worksite, eliminating the potential for drips and spills during the transfer of pesticides. Dissimilar pesticides stored separately prevent one from contaminating another or the accidental use of the wrong chemical. Safety cabinets that are specifically designed to house these types of chemicals offer features including sturdy double-wall, 18-gauge steel construction with 1½" of air space and dual flame-arresting vents. The three-point automatic latch with keyed lock prevents unauthorized access. Steel shelves fitted with corrosion-resistant polyethylene trays adjust on 3" (77mm) centers to accommodate a wide variety of containers. Self-close door(s) shuts and latches automatically when a fusible link melts at 165°F (74ºC) under fire conditions. Unique, concealed self-closing mechanism offers obstruction-free access to contents. All door styles meet OSHA and NFPA 30; self-close door styles also meet NFPA 1 and the International Fire Code. All cabinets are FM approved and come with a ten-year warranty. Product Summary Improve safety and convenience and reduce the risk of accidental poisoning and fires Fit almost anywhere and provide protection where space is limited Ideal when storing lesser quantities of pesticides Allow segregation of liquids stored at worksite Meet OSHA and NFPA 30 FM-approved ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 470C0036BLMAT,470 MARBLE 3' BLACK

Manufacturer: Justrite, Manufacturer Part Number: 480C0036BLMAT,480 PEBBLE TRAX 3' BLACK

Manufacturer: Justrite, Manufacturer Part Number: 485C0036YBMAT,485 ERGO TRAX 3' B/Y

Manufacturer: Justrite, Manufacturer Part Number: 11150This is a 5" DASHER PAN for PLUNGER CANS.

Manufacturer: Justrite, Manufacturer Part Number: 7150104Type I Safety Cans are compliant and economical. Justrite Type I safety cans reduce fire risks and make everyday use of flammables easier and safer. Protection features include a 3–1/2" (88mm) long chemical–resistant stainless steel flame arrester that stops flashback ignition, provides faster liquid flow and exceptional durability. The self–venting, self–closing leakproof lid prevents ruptures from pressure build–up and controls vapors and spills. Warning label includes an extra large ID zone for user labeling of contents to avoid misuse, reduce the potential for incompatible mixtures or may be used to designate department or individual owner. Made of galvanized steel with a tough powder paint finish, can capacities 1 gal (4L) and above have ample headspace to accommodate oil additives.

Manufacturer: Justrite, Manufacturer Part Number: 12754This is a 5 GAL DISP CAN TRAN BDY SS.

Manufacturer: Justrite, Manufacturer Part Number: 14565Type I Nonmetallic Safety Cans are constructed of high–density polyethylene and offer distinct advantages over steel models. They are inert so they standup to tough acids and corrosives, as well as heat. Poly cans are dent, puncture and chip–resistant and their color is integral to the can. All Justrite nonmetallic cans are designed and manufactured with a unique conductive current–carrying carbon insert imbedded into rib of the container, completing a ground path between the cover assembly and the flame arrester in the spout. When used with a grounding strip, this provides proper grounding and prevents the creation of an arc during filling or pouring. All Justrite Nonmetallic Type I cans are FM approved. The self–close cap, pressure relief mechanism and dual–density flame arrester work together to prevent ignition sources from entering without restricting liquid flow in or out of the can.

Manufacturer: Justrite, Manufacturer Part Number: 12770This is a 5 GAL HPLC (1/4")W/SS FAUCET.

Manufacturer: Justrite, Manufacturer Part Number: 12771This is a 5 GAL HPLC (3/8")W/SS FAUCET.

Manufacturer: Justrite, Manufacturer Part Number: 12772This is a 5 GAL DISP CAN W/ SS FAUCET.

Manufacturer: Justrite, Manufacturer Part Number: 7350130ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB. ⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7350230ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7350110ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 7350210ONLY Justrite's D.O.T. AccuFlow Safety Cans comply with the DOT AND have approval from FM Global. Compliance with DOT regulations for over–the–road transport of flammables. A hold–down bracket is tethered to the spout and equipped with a big, easy–to–grasp tightening screw. When used for the transport of fuel, the fusible link bracket is easy to engage. The fusible link melts at 165°F (74°C). Disengage the fusible link bracket when the can is not being used for transportation purposes. AccuFlow's exclusive Safe–Squeeze trigger mechanism opens the piston actuated spout and vacuum release valve for accurate pouring. A release of the handle instantly closes the valve. Built–in safety features include internal flame arresters, leak tight, self–closing lid; automatic venting between 3 and 5 psig (0.2 and 0.35 bar); and heavy roll bars to protect the spout. Meets D.O.T. and HM–181 requirements. United Nations Approved.. UN Marking: 1A1/Y1.2/100. Accepted container under CARB.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 10905Drain Cans for easy collection of used solvents. Easily and safely collect used solvents from parts washing equipment with a Justrite Drain Can. Widemouth funnel catches drainage with no spill and no mess. Removable funnel is plated steel. Builtin flame arrester keeps fire from contents. A .75" threaded plug allows safe disposal of waste liquids from the drain can into a permanent receptacle.

Manufacturer: Justrite, Manufacturer Part Number: 10906Drain Cans for easy collection of used solvents. Easily and safely collect used solvents from parts washing equipment with a Justrite Drain Can. Wide–mouth funnel catches drainage with no spill and no mess. Removable funnel is plated steel. Built–in flame arrester keeps fire from contents. A .75" threaded plug allows safe disposal of waste liquids from the drain can into a permanent receptacle.

Manufacturer: Justrite, Manufacturer Part Number: 14765Type I Nonmetallic Safety Cans are constructed of high–density polyethylene and offer distinct advantages over steel models. They are inert so they standup to tough acids and corrosives, as well as heat. Poly cans are dent, puncture and chip–resistant and their color is integral to the can. All Justrite nonmetallic cans are designed and manufactured with a unique conductive current–carrying carbon insert imbedded into rib of the container, completing a ground path between the cover assembly and the flame arrester in the spout. When used with a grounding strip, this provides proper grounding and prevents the creation of an arc during filling or pouring. All Justrite Nonmetallic Type I cans are FM approved. The self–close cap, pressure relief mechanism and dual–density flame arrester work together to prevent ignition sources from entering without restricting liquid flow in or out of the can.

Manufacturer: Justrite, Manufacturer Part Number: 14540Nonmetallic Dispensing Cans permit easy, one–hand dispensing of liquids directly onto work surface. Brass dispenser valves are leakproof and self–closing to minimize spills and control excess. Brass valves are FM–approved and recommended for flammables. Rugged high–density polyethylene body is textured and shaped for a firm grip.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: PP12755This is a 5–GALLON DISC HPLC CAN.

Manufacturer: Justrite, Manufacturer Part Number: TF12755This is a 5–GALLON DISC HPLC W/ SS TEFLON.

Manufacturer: Justrite, Manufacturer Part Number: BY12755This is a 5–GALLON HPLC W/ SS AND PP FITTING.

Manufacturer: Justrite, Manufacturer Part Number: 14545Nonmetallic Dispensing Cans permit easy, one–hand dispensing of liquids directly onto work surface. Brass dispenser valves are leakproof and self–closing to minimize spills and control excess. Brass valves are FM–approved and recommended for flammables. Rugged high–density polyethylene body is textured and shaped for a firm grip.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 14535Nonmetallic Dispensing Cans permit easy, one–hand dispensing of liquids directly onto work surface. Brass dispenser valves are leakproof and self–closing to minimize spills and control excess. Brass valves are FM–approved and recommended for flammables. Rugged high–density polyethylene body is textured and shaped for a firm grip.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.