Vestil

Manufacturer: Vestil, Manufacturer Part Number: FM-2072The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-seven (29) inches, with a thirty-six (36-5/8) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: FM-0648Capacity: 6,000 lbs., Operation: Mechanical, Usable Width: 48" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. The Mechanical Edge–O–Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: FM-2566Capacity: 25,000 lbs., Operation: Mechanical, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. The Mechanical Edge–O–Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: FM-2572Capacity: 25,000 lbs., Operation: Mechanical, Usable Width: 72" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. The Mechanical Edge–O–Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: CART-660-MThe Mechanical Scissor Cart raises and lowers material quickly and easily. The cart rolls smoothly on two rigid and two swivel casters. Mechanical screw drive provides precise positioning with no downward drift. Features an internal safety velocity fuse in each cylinder.

The Vestil Medium Duty High Performance Auto-Wrap Stretch Wrap Machine is built for efficient pallet wrapping with a strong 60-inch film capacity. Designed as a medium duty machine stretch wrap, it optimizes industrial processes while prioritizing operator safety and boosting productivity.Key Features An intuitive digital control center for easy adjustment of pallet rotations and programmable film wrapping patterns Four built-in multifunction wrap patterns for a wide range of applications, including a dedicated medium duty machine stretch wrap mode A variable speed powered carousel with soft start/stop to maintain wrapping consistency Photocell sensors that automatically adjust to varying pallet heights for enhanced safety Technical Specifications Manufacturer: Vestil (Vestil Collection) Manufacturer Part Number: SWA-60-AW Wrap Patterns: Four standard multifunction options Sensor Technology: Photocell sensors for detecting pallet height This advanced machine not only accelerates wrapping speed and consistency but also improves overall operational efficiency, making it a valuable investment for demanding industrial settings. Explore more trusted solutions in our Strapping and Stretch Wrap Machines collection.

Manufacturer: Vestil, Manufacturer Part Number: D-150-MD-GRN-TUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 1–1/2, Fork Pocket Center (in.): 28, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 40, Usable Chute Length (in.): 63–3/4, Usable Chute Height (in.): 41–1/2, Finish: Powder Coat Green – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.)

Manufacturer: Vestil, Manufacturer Part Number: D-100-MDThis Medium Duty Self-Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the front of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. The included safety restraint should be properly secured to a fork truck before dumping. (Length Dimension is measured at top of chute.)

This Medium Duty Low Profile 90° Self-Dumping Steel Hopper in Hunter Green is designed to make loading and dumping operations easier while enhancing safety on job sites. Its streamlined design enables fast operation with a forklift, ensuring material handling is both efficient and secure.Key Features• Full 90° dumping angle with a cushioned rubber bumper stop• Low-profile design for easy loading and quick forklift operation• Integrated safety restraint and secure cable pull mechanism• Heavy-duty latch that protects workers during dumpingSpecifications• Material: Durable steel construction• Design: Low profile for convenient loading; engineered for a complete 90° dump• Dump Mechanism: Operated by a cable pull from the forklift seat with an automatic return to a secure, upright position• Stackability: Compatible with H-25/H-50 and H-100/H-150 models (Note: Do not stack more than three units; only stack when unloaded and empty)For industries requiring efficient material handling and reliable safety features, this hopper provides a robust solution that minimizes downtime. Always secure the safety restraint before use to ensure safe and optimal operation. For more industrial material handling solutions, visit our Hoppers collection and explore additional options in our Material Handling collection.

Manufacturer: Vestil, Manufacturer Part Number: D-100-MD-GRN-TUniform Capacity (pounds): 4000, Steel (gauge): 10, Volume (cubic yards): 1, Fork Pocket Center (in.): 18, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 38, Usable Chute Length (in.): 54–1/4, Usable Chute Height (in.): 32–1/2, Finish: Powder Coat Green – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom.

Manufacturer: Vestil, Manufacturer Part Number: D-100-MD-ORG-CUniform Capacity (pounds): 4000, Steel (gauge): 10, Volume (cubic yards): 1, Fork Pocket Center (in.): 18, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 38, Usable Chute Length (in.): 54–1/4, Usable Chute Height (in.): 32–1/2, Finish: Powder Coat Orange – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom.

Manufacturer: Vestil, Manufacturer Part Number: D-100-MD-GY-SGUniform Capacity (pounds): 4000, Steel (gauge): 10, Volume (cubic yards): 1, Fork Pocket Center (in.): 18, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 38, Usable Chute Length (in.): 54–1/4, Usable Chute Height (in.): 32–1/2, Finish: Powder Coat Grey – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom.

Manufacturer: Vestil, Manufacturer Part Number: D-150-MD-SRUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 1–1/2, Fork Pocket Center (in.): 28, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 40, Usable Chute Length (in.): 63–3/4, Usable Chute Height (in.): 41–1/2, Finish: Powder Coat Red – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.)

Manufacturer: Vestil, Manufacturer Part Number: D-150-MDUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 1–1/2, Fork Pocket Center (in.): 28, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 40, Usable Chute Length (in.): 63–3/4, Usable Chute Height (in.): 41–1/2, Finish: Powder Coat Blue – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.)

Manufacturer: Vestil, Manufacturer Part Number: D-150-MD-GY-SGUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 1–1/2, Fork Pocket Center (in.): 28, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 40, Usable Chute Length (in.): 63–3/4, Usable Chute Height (in.): 41–1/2, Finish: Powder Coat Grey – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.)

Manufacturer: Vestil, Manufacturer Part Number: D-150-MD-ORG-CUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 1–1/2, Fork Pocket Center (in.): 28, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 40, Usable Chute Length (in.): 63–3/4, Usable Chute Height (in.): 41–1/2, Finish: Powder Coat Orange – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.)

Manufacturer: Vestil, Manufacturer Part Number: D-200-MDThis Medium Duty Self-Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the front of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. The included safety restraint should be properly secured to a fork truck before dumping. (Length Dimension is measured at top of chute.)

Discover the exceptional performance of our SELF-DUMP HOP MD 2 CU YD 4K MACHINE GRAY, a medium-duty self-dumping steel hopper designed for efficient and safe material handling. With a capacity of 2 cubic yards and a striking machine gray finish, this Vestil-manufactured unit combines reliability with automatic operation features that streamline your workflow while upholding high safety standards.Key Features• Automatic bumper release that triggers the self-dumping action when the hopper contacts the front of the dumpster• Self-dumping function with a mechanism that returns the hopper to an upright, locked position• Full-length fork tube and an included cable that allow manual dumping from the fork truck seat• Integrated safety restraint designed to secure the hopper and enhance operational safety• Complies with industry standards, ensuring a dependable and secure work environmentDetailed SpecificationsThis medium-duty unit features a manufacturer part number of D-200-MD-GY-MG and is engineered with precise dimensions (length measured at the top of the chute) for consistent performance. Its design supports efficient material transfer and safe containment operations. For more information on self-dumping hoppers engineered for industrial applications, visit our Self-Dumping Hoppers collection, or explore additional related equipment in our Vestil lineup.

Manufacturer: Vestil, Manufacturer Part Number: D-200-MD-WHTUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 2, Fork Pocket Center (in.): 28, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 53, Usable Chute Length (in.): 63–3/4, Usable Chute Height (in.): 41–1/2, Finish: Powder Coat White – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.)

Manufacturer: Vestil, Manufacturer Part Number: D-200-MD-ORG-CUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 2, Fork Pocket Center (in.): 28, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 53, Usable Chute Length (in.): 63–3/4, Usable Chute Height (in.): 41–1/2, Finish: Powder Coat Orange – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.)

Manufacturer: Vestil, Manufacturer Part Number: D-200-MD-GY-SGUniform Capacity (pounds): 4,000, Steel (gauge): 10, Volume (cubic yards): 2, Fork Pocket Center (in.): 28, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 53, Usable Chute Length (in.): 63–3/4, Usable Chute Height (in.): 41–1/2, Finish: Powder Coat Grey – This Medium Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.)

Manufacturer: Vestil, Manufacturer Part Number : H-100-MD-BDA self-dumping hopper with a bumper release defends worker safety. The hopper is automatically released to dump, when the edge of the hopper is contacted. Hopper then returns to an upright and locked position automatically after it dumps. A cable is also included that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. Steel construction with blue baked-in powder-coated finish for added toughness. Hopper must be attached to the fork truck when dumping. -Capped fork pockets -Low Profile design -90 Degree dump angle -Cushioned rubber bump stop

The Vestil 1 CuYd Self Dump Hopper is designed for high performance and durability in rigorous industrial settings. This medium-duty hopper is crafted to boost productivity while maintaining strict safety standards. Its state-of-the-art design minimizes downtime and streamlines operations in high-demand facilities.With decades of experience, Spill 911 offers solutions that enhance workflow efficiency and ensure safety compliance. For additional industrial solutions, visit our Vestil collection or explore our Material Handling range.Key Features• Automatic self-dumping initiated by a bumper release that contacts the front of the dumpster• Automatic return to an upright, locked position after dumping• Optional manual operation through a cable controlled from the forklift seat• Stackable design when the top hopper is rotated 90 degrees relative to the baseTechnical Details• Manufacturer: Vestil• Manufacturer Part Number: D-100-MD-BLK-SG (also available as D-100-MD-BLK-HG)• Length dimension measured from the top of the chute• Constructed from durable steel for dependable medium-duty performanceUsage & Safety Guidance• Always secure the attached safety restraint to the forklift before tipping the hopper• Use approved forklifts (preferably high lift models with vertical masts)• Ensure operations take place on stable surfaces, such as concrete or asphalt• Follow OSHA guidelines and site-specific safety protocols for optimal performanceEnhance your operations with the reliability and efficiency of the Vestil 1 CuYd Self Dump Hopper.

This medium-duty, low-profile self-dumping steel hopper from Vestil provides an efficient solution for material handling. Designed for safe and straightforward loading, it features a full 90° dump angle with a cushioned rubber bumper stop, and it automatically returns to an upright, locked position once dumping is complete. Perfect for both industrial and commercial settings, its streamlined design allows for easy forklift compatibility for rapid operation.Key Features• Full 90° dump angle for fast discharge• Cushioned rubber bumper stop for controlled dumping• Cable-operated manual dump initiated from the forklift seat• Automatic return to an upright, locked position• Suitable for stacking only when unloaded and emptySpecifications & Compatibility• Manufacturer: Vestil (Vestil Collection)• Manufacturer Part Number: H-150-MD-GY-MG / MFG Part#: H-150-MD-GRN-H• Low-profile design that enhances efficient loading processes• Compatible models: H-25, H-50 (stackable); H-100, H-150 (stackable)• Note: Do not stack hoppers more than 3 highUsage & SafetyAttach the included safety restraint to the forklift before triggering the dump via the cable pull. Always ensure that hoppers are unloaded and empty before stacking to maintain operational safety and protect equipment integrity. For more material handling solutions, visit our Material Handling collection.