vestil

Manufacturer: Vestil, Manufacturer Part Number: RBG-124The RackBack ® panel bolts directly to your existing pallet rack uprights creating a sturdy barrier between inventory and the ground below. Durable all welded, angle frame panels give constant protection from dangerous spills; protecting personnel while containing inventory. The unit is competitively priced with netting style backing, easy to install and protects employees by making sure nothing can fall when pushed by a lift truck or if a pallet breaks. Panels can be stacked one on top of the other to top of rack system. The "Above the Top" mounting allows panels to extend above top rack beam.

Manufacturer: Vestil, Manufacturer Part Number: CYL-2Overall Size: 40"W x 29"L x 65"H, Capacity: 500 lbs. – Welding Cylinder Torch Cart – Designed to contain and transport cutting torch essentials to where they are needed. Includes tank storage compartments, torch holding brackets, torch holding box, overhead crane lifting point, two handles, and fork pockets. Unit rolls smoothly on two 10" x 3" pneumatic wheels. Welded steel construction with yellow painted finish. Raise with hoist, lift with fork truck or manually push around.

Manufacturer: Vestil, Manufacturer Part Number: VWIRE-48HCapacity(Pounds): 4,000, Overall Size (WxDxH): 40"x48"x30", Mesh Wire Gauge: 2, Mesh Opening: 2" x 2" – Wire Containers – All steel construction available is either 2–gauge, 5–gauge or 11–gauge galvanized welded wire mesh. Corners have eyelets designed for rigidity and stacking. Legs are wrapped and welded around base to eliminate sharp edges. Containers can be stacked 4 high and have a 4" clearance underneath to allow movement by fork or pallet trucks. Container's front half drop gate allows speed loading and access to stored goods. The collapsible design allows for efficient storage and transportation. If you are in the need for an open wire design that allows for full visibility for inventory checks, ventilation and cleanliness then this is the product for you.

Manufacturer: Vestil, Manufacturer Part Number: WP-3648-84B-DDPlatform Size (W x L): 36" x 48", Fork Pocket Centers: 16", Expanded Metal Back: 84" – Side Dual Door Entry – Work Platforms – Convenient fork truck work platforms quickly and safely transport maintenance personnel where they are needed. Attaches to fork truck by inserting forks into fork pockets and securing platform to fork truck. Tine lock must be engaged to secure platform to forks. 42" high handrail with 21" high mid–rail on three sides. 60" high expanded metal backing on fourth side (84" high backing to meet California OSHA specifications). Includes checker floor plate platform and 36" long strap with hook to attach platform to fork truck. The usable fork pockets are 7–3/4"W x 3–3/8"H in rear and 7–3/4"W x 1–7/8"H in front. Capacity is 1,000 pounds. Welded steel construction. Powder coat blue finish. The Full Featured units include an Emergency Stop Button Kit and Web Lanyard with Safety Harness.

Manufacturer: Vestil, Manufacturer Part Number: WP-3636-CAConvenient fork truck work platforms quickly and safely transport maintenance personnel where they are needed. Attaches to fork truck by inserting forks into fork pockets and securing platform to fork truck. Tine lock must be engaged to secure platform to forks. 42" high handrail with 21" high mid–rail on three sides. 60" high expanded metal backing on fourth side (84" high backing to meet California OSHA specifications). Includes checker floor plate platform and 36" long strap with hook to attach platform to fork truck. The usable fork pockets are 7–3/4"W x 3–3/8"H in rear and 7–3/4"W x 1–7/8"H in front. Capacity is 1,000 pounds. Welded steel construction. Powder coat blue finish. SPECIFICATIONSPlatform Size: 36"W x 36"L36" x 36" x 60" - 216 lbs.

This Work Station Electric Hydraulic Scissor Table is engineered to provide a seamless lifting solution for industrial and warehouse applications. It features a scissor-type mechanism that enables smooth adjustments from low to ergonomic heights, ensuring your workspace remains both efficient and safe. Designed with versatility in mind, this workstation lift is perfect for operations requiring precise material handling without sacrificing space.Key Specifications• Manufacturer: Vestil• Part Number: EHLT-WS-2436-1.5-31• Lift Capacity: 1.5K• Dimensions: Approximately 24" x 36"• External Power Unit: Can be placed up to 8 feet away• Standard Controls: Hand control and electric toe guardBenefits & Safety FeaturesThis scissor lift provides a superb blend of safety, versatility, and efficiency. Its design ensures a consistent and smooth elevation, reducing operator strain while boosting productivity. The electric toe guard and the option to remotely position the power unit simplify operation, making it a dependable choice for environments where safety is a top priority.Ideal ApplicationsWhether you need a scissor lift for your manufacturing facility or a workstation lift for your warehouse, this model meets a variety of industrial needs. Its compact design fits perfectly in tight spaces while still delivering the performance and safety you require.Upgrade your operations today by choosing a model that sets the benchmark for reliability and ergonomic support. Buy your Work Station Scissor Lift now and experience industry-leading performance.For more industrial and safety solutions, visit our Vestil collection or browse our Scissor Lifts collection.

This adjustable, wrap-around tote tank heater is designed to provide efficient, even heating for your industrial tank applications. Engineered as a 48-inch tank heater, it delivers a reliable solution for maintaining ideal fluid temperatures while preventing issues like freeze damage and condensation.Key Features Dimensions: Comfortably accommodates tote tanks ranging from 40×40 inches up to 48×48 inches. Voltage Options: Standard 120V (1,440W) performance is available, with an alternative 240V (2,880W) option for enhanced heating capabilities. Temperature Control: Featuring an adjustable thermostat that allows you to set temperatures between 50°F and 160°F, along with a built-in manual reset high-limit at 195°F for additional safety. Easy Setup: A full-coverage, plug-and-play system paired with adjustable nylon straps and buckles ensures a secure, custom fit. Safety Measures: Equipped with a patented grounding system and an integrated spigot hole to support safe, indoor operation. How It WorksPerfect for industrial users in manufacturing, construction, or facility management, this tote heating solution is simple to install—just wrap the heater around your tote tank, secure it with the adjustable straps, and plug it in for immediate performance. Its dual heat zones provide both heating and insulation, ensuring effective temperature management during operation.Discover more reliable industrial solutions in our Vestil collection and explore our range of IBC Tanks for comprehensive spill and material handling needs.

Efficient and safe heating is crucial for maintaining optimal conditions in commercial tote tanks. The Vestil Wrap-Around Tote Tank Heater is designed to both heat and insulate, ensuring consistent warming and compliance with operational standards. Perfect for industrial and commercial environments, this heater offers flexibility for tanks measuring 42 inches in height with adjustable widths ranging from 40″×40″ to 48″×48″, making it a dependable option for various applications.Key Features Manufacturer: Vestil | Part Number: IBC-HEAT-275 120V, 1,440 Watts plug-and-play system for quick and efficient heating Dual heat zones that provide both warming and insulation for even temperature distribution Adjustable thermostat range from 50°F to 160°F with a built-in manual reset high-temperature cutoff at 195°F Secure installation with adjustable nylon straps and buckles Standard 6-foot power cord featuring a patented ground safety mechanism Integrated spigot hole for enhanced functionality Installation & OperationDesigned for indoor use, installation is straightforward. Simply wrap the heater around the tote tank, secure it with the adjustable straps, plug it in, and set your desired temperature using the intuitive thermostat. This unobtrusive design makes it easy to achieve consistent and reliable heating for your commercial tank needs.Technical Specifications Dimensions: Fits 42-inch high tanks with widths ranging from 40″×40″ up to 48″×48″ Power: 120V/1440W Temperature: Adjustable range from 50°F to 160°F, with a high-temperature cutoff at 195°F Power Cord: 6 feet in length For additional industrial heating solutions, check out our Vestil collection and IBC Tanks.

The Yellow Utility Box UBX-Y-NW without wheels is a durable solution designed for fixed installations where mobility is not required. Built for industrial spill kits and diverse storage applications, this non-wheeled model distinguishes itself from competitors that offer wheeled alternatives. Its robust construction makes it the ideal option when you want to buy a yellow utility box or purchase the utility box model UBX-Y-NW from a reliable supplier.Manufactured by Vestil (Part Number: UBX-Y-NW), this utility box includes:Key Features Forklift accessible for efficient handling Lockable for enhanced security Heavy-duty, double-walled lid sloped to shed moisture Industrial-grade build ensuring durability in harsh environments Fixed design specifically for non-mobile applications Applications and BenefitsThis utility box provides versatile storage solutions for spill kits, storage bins, and other industrial needs. Its secure locking mechanism and rugged construction deliver reliable performance in demanding environments, ensuring operational safety and compliance. The fixed, non-wheeled design is perfectly suited for locations that require stable storage. Whether you are sourcing from the trusted Vestil collection or exploring our range in Spill Response Containers, this product meets strict industrial requirements. Discover our offerings at Spill 911 Inc. for comprehensive spill management and safety solutions designed for industrial and commercial applications.

Manufacturer: Vestil, Manufacturer Part Number: ZLTT-4472-4-48 The zero lift & tilt table is designed to lift or tilt products to an ergonomic working position, reducing operator bending. Products may be loaded and unloaded with the use of a standard hand pallet truck. There is no pit mounting required. Maximum tilt angle is 45 degrees. Lift and tilt is controlled separately. Remote power unit with hand-held control is standard. 45 Degrees maximum tilt angle positions loads to optimum ergonomic positions Lift and tilt options are controlled separately allowing a precise working angle for the employee No pit mounting required makes installation quick and easy Products may be loaded and unloaded by a standard hand pallet truck when fork trucks aren't available Capacity: 4,000 lbs., Platform Size: 44" x 72", Raised Height: 48", Overall Size: 69"W x 79"L x 24"H – Zero Lift & Tilt Table – Designed to lift or tilt products to an ergonomic working position, reducing operator bending. Products may be loaded and unloaded with the use of a standard hand pallet truck. No pit mounting required! Maximum tilt angle is 45°. Lift and tilt controlled separately. Remote power unit with hand–held control standard.

Manufacturer: Vestil, Manufacturer Part Number: ZLTT-5252-4-36 The zero lift & tilt table is designed to lift or tilt products to an ergonomic working position, reducing operator bending. Products may be loaded and unloaded with the use of a standard hand pallet truck. There is no pit mounting required. Maximum tilt angle is 45 degrees. Lift and tilt is controlled separately. Remote power unit with hand-held control is standard. 45 Degrees maximum tilt angle positions loads to optimum ergonomic positions Lift and tilt options are controlled separately allowing a precise working angle for the employee No pit mounting required makes installation quick and easy Products may be loaded and unloaded by a standard hand pallet truck when fork trucks aren't available Capacity: 4,000 lbs., Platform Size: 52" x 52", Raised Height: 36", Overall Size: 77"W x 59"L x 24"H – Zero Lift & Tilt Table – Designed to lift or tilt products to an ergonomic working position, reducing operator bending. Products may be loaded and unloaded with the use of a standard hand pallet truck. No pit mounting required! Maximum tilt angle is 45°. Lift and tilt controlled separately. Remote power unit with hand–held control standard.

Manufacturer: Vestil, Manufacturer Part Number: ZLTT-5272-2-48 The zero lift & tilt table is designed to lift or tilt products to an ergonomic working position, reducing operator bending. Products may be loaded and unloaded with the use of a standard hand pallet truck. There is no pit mounting required. Maximum tilt angle is 45 degrees. Lift and tilt is controlled separately. Remote power unit with hand-held control is standard. 45 Degrees maximum tilt angle positions loads to optimum ergonomic positions Lift and tilt options are controlled separately allowing a precise working angle for the employee No pit mounting required makes installation quick and easy Products may be loaded and unloaded by a standard hand pallet truck when fork trucks aren't available Capacity: 2,000 lbs., Platform Size: 52" x 72", Raised Height: 48", Overall Size: 77"W x 79"L x 24"H – Zero Lift & Tilt Table – Designed to lift or tilt products to an ergonomic working position, reducing operator bending. Products may be loaded and unloaded with the use of a standard hand pallet truck. No pit mounting required! Maximum tilt angle is 45°. Lift and tilt controlled separately. Remote power unit with hand–held control standard.

Manufacturer: Vestil, Manufacturer Part Number: ZLTT-4452-4-36 The zero lift & tilt table is designed to lift or tilt products to an ergonomic working position, reducing operator bending. Products may be loaded and unloaded with the use of a standard hand pallet truck. There is no pit mounting required. Maximum tilt angle is 45 degrees. Lift and tilt is controlled separately. Remote power unit with hand-held control is standard. 45 Degrees maximum tilt angle positions loads to optimum ergonomic positions Lift and tilt options are controlled separately allowing a precise working angle for the employee No pit mounting required makes installation quick and easy Products may be loaded and unloaded by a standard hand pallet truck when fork trucks aren't available Capacity: 4,000 lbs., Platform Size: 44" x 52", Raised Height: 36", Overall Size: 69"W x 59"L x 24"H – Zero Lift & Tilt Table – Designed to lift or tilt products to an ergonomic working position, reducing operator bending. Products may be loaded and unloaded with the use of a standard hand pallet truck. No pit mounting required! Maximum tilt angle is 45°. Lift and tilt controlled separately. Remote power unit with hand–held control standard.

Manufacturer: Vestil, Manufacturer Part Number: PBSS-6624-4This Plastic Bulk Shelving & Storage is the largest all-purpose industrial-grade shelving system in the industry. The unique locking collar system lets you choose whether to build up, out, or both. This shelving has rigid high-density polyethylene panels and a grid top that allows liquids to flow through, promotes air circulation and prevents dust build up. The entire system is chemically resistant, making it an ideal choice for HAZMAT storage or any other applications, corrosive or not.

Manufacturer: Vestil, Manufacturer Part Number: PBSS-9624-3This Plastic Bulk Shelving & Storage is the largest all-purpose industrial-grade shelving system in the industry. The unique locking collar system lets you choose whether to build up, out, or both. This shelving has rigid high-density polyethylene panels and a grid top that allows liquids to flow through, promotes air circulation and prevents dust build up. The entire system is chemically resistant, making it an ideal choice for HAZMAT storage or any other applications, corrosive or not.

Manufacturer: Vestil, Manufacturer Part Number: WP-40120Multi-Person Work Platforms quickly and safely raise maintenance personal where they are needed giving you a larger size platform to accommodate your application. The work platform attaches to fork truck by inserting forks into fork pockets and securing platform to fork truck. This Work Platform is made of square tube construction, base and side curbs are formed from one piece of heavy gauge sheet for extra strength. Deck has slip resistant surface, and fork pocket openings. Safety pins behind each fork and heavy duty chains welded to back frame of platform which secure around the fork carriage. Hinged gate on the front of the unit, with pin safety lock built in. Painted safety yellow.

Manufacturer: Vestil, Manufacturer Part Number: LID-SCRReplacement LID for screw top pail.

Manufacturer: Vestil, Manufacturer Part Number: LM-EBNT-6-24Description: Economy Boom (Non Telescoping), Overall Height: 11", Capacity (Pounds): 6,000 – Lift Master Booms – Unique performance, convenience and safety features are built into every Lift Master Boom. Fabricated from rugged and durable boom that will provide long term service. Telescopic units extend to 144" and come with an infinitely adjustable locking screw (except orbit booms which features a spring loaded detent). Fork pockets measure 7"W x 2"H usable on 24" centers. A 36" safety restraint secures the boom to the fork truck for safe operation. Each unit includes two lifting hooks.

Manufacturer: Vestil, Manufacturer Part Number: AIR-1000-LDThe air Hydraulic cart features a two speed foot pump and hand held reciprocating air/oil power to raise the platform. It utilizes the two speed foot pump for minor height adjustments and the factory air/oil power for effortless lifting. -Reciprocating air/oil conveniently raises platform with ease -Two speed foot pump raises platform when air is not available -Poly-on-poly wheels roll smoothly when loaded down -Steel construction provides solid long lasting use

Manufacturer: Vestil, Manufacturer Part Number: H-150-LD-SLThe Light Duty Low Profile 90degree Self-Dumping Steel Hopper feature a full ninety (90) degree dump angle with a cushioned rubber bumper stop. The low profile design is essential for convenient loading. Dumping with a fork truck is quick and simple. A cable is pulled from the seat of the fork truck to dump the hopper. The unit returns to an upright and locked position when lowered to the ground. The included safety restraint should be properly secured to a fork truck before dumping. H-25 and H-50 models can be stacked, as well as, the H-100 and H-150 models. Never stack hoppers more than 3 high. Units are only to be stacked unloaded and empty. MFG Part# H-150-LD-SL

The Light Duty Low Profile 90° Self-Dumping Steel Hopper from Vestil (Model H-25-LD-SL) is engineered to meet the challenges of industrial loading and unloading with safety and efficiency at the forefront. Its low profile design enables quick, hassle-free loading via forklift, while the innovative self-dumping mechanism provides a full 90° dump angle for optimal material flow.Key Benefits & Features• Self-dumping mechanism with a full 90° dump angle and cushioned rubber bumper stop to reduce impact.• Low profile design for convenient and safe loading/unloading.• Cable-operated dump trigger that can be activated from the forklift seat for streamlined operations.• Includes a safety restraint that must be securely fastened before dumping to ensure operator safety.• Stackable design for H-25 and H-50 models (up to three units), when unloaded and empty, offering flexibility and space optimization.Product Specifications• Manufacturer: Vestil (Manufacturer Part Number: H-25-LD-SL)• Built with durable steel to endure tough industrial environments.• Automatically returns to an upright, locked position when lowered to the ground.• Designed for safe and efficient material handling in demanding settings.Discover a more efficient workflow by exploring our range in the Material Handling collection or find additional solutions in the Self-Dumping Hoppers category. This robust hopper is constructed to meet the rigorous demands of industrial operations while prioritizing safety.

This Vestil Light Duty Low Profile 90° Self-Dumping Steel Hopper (MFG Part Number H-100-LD-GRN-H) is designed to provide efficiency and safety in industrial material handling operations. Built for smooth loading and unloading, it boasts a full 90° dump angle with a cushioned rubber bumper stop for smooth operation when using a forklift. Its low profile design allows for quick, convenient loading, making it a perfect fit for yard and industrial applications.Key Features• Full 90° self-dumping angle with a cushioned rubber bumper stop• Low profile design for convenient forklift loading• Simple dump mechanism – just pull the cable with the forklift• Secure safety restraint included for added operational protectionUsage & Safety Guidelines• Always attach the safety restraint to the forklift before operating the dump mechanism• For safe stacking, only stack unloaded and empty hoppers• H-25 and H-50 models can be stacked, as well as H-100 and H-150 models, but never stack more than three high• Allow the unit to return to its upright, locked position after dumpingExperience streamlined operations and enhanced safety with this dependable hopper. For more material handling solutions, visit our Material Handling collection or explore our Self-Dumping Hoppers for additional options.

Experience streamlined operations with our Light Duty Low Profile 90° Self-Dumping Steel Hopper, expertly engineered for efficient material handling. This hopper’s low-profile design not only enhances forklift visibility during loading but also minimizes operator fatigue, ensuring smooth and safe workflows. Explore more in our Self-Dumping Hoppers collection.Key Features & Benefits Full 90° dump angle with a cushioned rubber bumper stop for controlled, smooth dumping Low-profile construction that improves loading and unloading clarity and efficiency Cable-operated release mechanism for quick, effortless activation Integrated safety restraint designed for secure attachment to a forklift Versatile stacking options: H-25 models with H-50, and H-100 models with H-150 (Note: Stack only up to three units when unloaded and empty) Specifications Manufacturer: Vestil Manufacturer Part Number: H-100-LD-BLK-SG Constructed from durable steel, offering reliable performance in rugged environments Usage & SafetyDesigned for optimal performance, simply pull the cable from the forklift seat to initiate a smooth dump. The hopper automatically returns to an upright, locked position once lowered. Always ensure the safety restraint is properly secured before starting the dump, and adhere to strict stacking guidelines to maintain operational safety.Experience the benefits of a low-profile dump hopper engineered for both efficiency and safety in your industrial operations. For additional material handling solutions, visit our Material Handling collection.

Manufacturer: Vestil, Manufacturer Part Number: D-100-LD-GY-SGUniform Capacity (pounds): 2000, Steel (gauge): 12, Volume (cubic yards): 1, Fork Pocket Center (in.): 18, Usable Fork Pocket Width (in.): 7–1/2, Usable Fork Pocket Height (in.): 2–1/2, Usable Chute Width (in.): 38, Usable Chute Length (in.): 54–1/4, Usable Chute Height (in.): 32–1/2, Finish: Powder Coat Grey – This Light Duty Self–Dumping Steel Hopper with Bumper Release automatically dumps when bumper release contacts the side of the dumpster. Hopper returns to an upright and locked position automatically after it dumps. Also includes a cable that may be operated from the seat of the fork truck to manually dump the hopper. A safety restraint is provided to secure the hopper to the fork truck. (Length Dimension is measured at top of chute.) Hopper is stackable if you stack the top hopper turned ninety (90) degrees from the bottom.