vestil

Manufacturer: Vestil, Manufacturer Part Number: PRDC-DPNOptional Pallet Rack Drum Cradle Drip Pan prevents leaks from going to the floor, includes brackets.

Manufacturer: Vestil, Manufacturer Part Number: PAL-D/RUniform Capacity (pounds): 2,000, Fork Length (in.): 52, Fork Pocket Width (in.): 7–1/2, Fort Pocket Height (in.): 2–1/2, Fork Drop Angle (degrees) : 90, Construction: Steel, Finish: Powder Coat – Dump loaded pallets easily without leaving the seat of your fork truck with the all welded steel Pallet Dumper/Retainer. Unit slides onto forks and is secured by a safety restraint. Two (2) retainers hold the pallet in place while dumping the contents into a hopper or dumpster. Once the retainers have cleared the opposite end of the pallet, raise the forks and the retainers will hold the pallet on the forks. Lift the pallet to the dumping height and rest the pallet on the edge of the dumpster. Pull the chain, releasing the fork carriage, allowing the pallet to tilt and dump the load into the hopper or dumpster. When finished, simply lower to the ground until the carriage latches.

Manufacturer: Vestil, Manufacturer Part Number: HDP-2-ABOptional Adjustable Bail for the Pallet Lifter. MFG Part# HDP-2-AB

Manufacturer: Vestil, Manufacturer Part Number: HDP-4-ABOptional Adjustable Bail for the Pallet Lifter. MFG Part# HDP-4-AB

Manufacturer: Vestil, Manufacturer Part Number: HDP-6-ABOptional Adjustable Bail for the Pallet Lifter. MFG Part# HDP-6-AB

Manufacturer: Vestil, Manufacturer Part Number: PRSN-108-4Pallet Rack Back Guard will minimize the potential hazard of product falling out the back of pallet rack. Attach this steel protective shield with the included steel brackets. Spacer bracket installs to space out guard. Wire mesh is attached to angle frame.

Manufacturer: Vestil, Manufacturer Part Number: PRSN-120-4Pallet Rack Back Guard will minimize the potential hazard of product falling out the back of pallet rack. Attach this steel protective shield with the included steel brackets. Spacer bracket installs to space out guard. Wire mesh is attached to angle frame.

Manufacturer: Vestil, Manufacturer Part Number: PRSN-96-4Pallet Rack Back Guard will minimize the potential hazard of product falling out the back of pallet rack. Attach this steel protective shield with the included steel brackets. Spacer bracket installs to space out guard. Wire mesh is attached to angle frame. Hardware included.

Manufacturer: Vestil, Manufacturer Part Number: PRDC-36The Pallet Rack Drum Cradle converts pallet racks into a versatile horizontal drum cradle. The unit works with either box beams and/or step beams. The drum angle is adjustable by using the height-adjustment bolts (sloping drum allows user to get 3% more fluid out). MFG Part# PRDC-36

Manufacturer: Vestil, Manufacturer Part Number: PRDC-42The Pallet Rack Drum Cradle converts standard (42 inch) pallet racks into a versatile horizontal drum cradle. The unit works with either box beams and/or step beams. The drum angle is adjustable by using the height-adjustment bolts (sloping drum allows user to get 3% more fluid out).

Manufacturer: Vestil, Manufacturer Part Number: PRDC-36-RThe Pallet Rack Drum Cradle converts pallet racks into a versatile horizontal drum cradle. The unit works with either box beams and/or step beams. The drum angle is adjustable by using the height-adjustment bolts (sloping drum allows user to get 3% more fluid out). MFG Part# PRDC-36-R

Manufacturer: Vestil, Manufacturer Part Number: PRDC-42-RThe Pallet Rack Drum Cradle converts standard (42 inch) pallet racks into a versatile horizontal drum cradle. The unit works with either box beams and/or step beams and features rollers that allow manual drum rotation making faucet/vent install easy. The drum angle is adjustable by using the height-adjustment bolts (sloping drum allows user to get 3% more fluid out).

Manufacturer: Vestil, Manufacturer Part Number: WMD-4246Pallet Rack Wire Decking provides maximum support at minimum cost. The three “Uin channels keep pallet and products from falling thru rack beams. Welded wire construction with under-supports. Powder-coat finish discourages rust. Requires two (2) sections for use in bay. MFG Part# WMD-4246

Manufacturer: Vestil, Manufacturer Part Number: WMD-4252Pallet Rack Wire Decking provides maximum support at minimum cost. The three “Uin channels keep pallet and products from falling thru rack beams. Welded wire construction with under-supports. Powder-coat finish discourages rust. Requires two (2) sections for use in bay. MFG Part# WMD-4246

Manufacturer: Vestil, Manufacturer Part Number: WMD-4258Pallet Rack Wire Decking provides maximum support at minimum cost. The three “Uin channels keep pallet and products from falling thru rack beams. Welded wire construction with under-supports. Powder-coat finish discourages rust. Requires two (2) sections for use in bay. MFG Part# WMD-4246

Engineered for optimal spill containment and operational efficiency, this high-performance PRS pallet provides a dependable solution for industrial and commercial settings. Designed to integrate seamlessly with PRS rack systems, it securely contains spills while allowing direct forklift access to wooden pallets without interfering with nearby storage.Key Features Accurate Capacity: Safely holds up to four 55‑gallon drums, offering reliable storage for hazardous liquids. Durable Construction: Constructed from rugged polyethylene with a high-visibility finish for easy cleaning and enhanced safety. Smart Design: Its low-profile shape minimizes obstructions in warehouse racks, while the integrated drain/ball valve assembly allows for effortless liquid drainage. Precise Dimensions: The sump’s internal pallet measures approximately 49" x 49". Overall dimensions are engineered to fit standard warehouse spaces, delivering a secure and space-efficient spill containment solution. This PRS pallet rack is designed to meet the demanding requirements of spill management. Its construction not only prevents dangerous spills from damaging floors, equipment, and inventory but also simplifies cleanup operations, supporting compliance with industrial safety standards.Discover more about our trusted industrial safety solutions in our Vestil collection and explore additional spill management products in our Warehouse Rack Containment series.

Manufacturer: Vestil, Manufacturer Part Number: PRS-51-NDPolyethylene Pallet Rack Sump, keeps dangerous and costly spills off floors, equipment and inventory. Allows direct forklift access to wooden pallet - sump unit stays positioned in the rack when removing pallet and drums. Low profile design fits into warehouse racking with minimal obstruction to adjacent storage areas. Unit holds fifty five (55)-gallon drums on a standard shipping pallet. This unit does not contain a drain.

Manufacturer: Vestil, Manufacturer Part Number: PS-RF-CKThe caster feature, consists of 6in x 2in glass-filled nylon two (2) rigid and two (2) swivel casters with brake. MFG Part# PS-RF-CK

Manufacturer: Vestil, Manufacturer Part Number: PTA-P-SWCIn warehouses stretch wrap is seemingly always required. But, rolls of wrap can often be elusive; gone the second you need it. That's where the stretch wrap caddy comes in! The stretch wrap caddy is built to hold rolls of wrap when your hands are otherwise in use, like driving a pallet truck. The caddy can be attached to the exterior of the pallet truck in any position that fits the users preference and ready for use in a matter of minutes. So stop wasting precious time looking for the roll of stretch wrap and just remember it's in the last place you left it; in the stretch wrap caddy! -Built of durable plastic -Pre-drilled mounting holes -Mounting screws included -High tack adhesive included

Manufacturer: Vestil, Manufacturer Part Number: BTC-PJCapacity: 4,000 lbs., Width: 32", Depth: 42", Height: 7" – Pallet Truck Battery Transfer Cart – Battery Transfer Cart is designed for use with pallet trucks to load, unload, and transfer fork truck batteries. Features roller deck for easy battery movement. Front locking safety tabs to secure battery in cart. Pallet truck is not included. Welded steel construction with powder coat yellow finish.

Manufacturer: Vestil, Manufacturer Part Number: BTC-PJ-WINCHCapacity: 4,000 lbs., Width: 32", Length: 42", Height: 46" – Pallet Truck Battery Transfer Cart w/ Winch – Battery Transfer Cart is designed for use with pallet trucks to load, unload, and transfer fork truck batteries. Features roller deck for easy battery movement. Front locking safety tabs to secure battery in cart. Pallet truck is not included. Welded steel construction with powder coat yellow finish. Winch attachment can be installed easily with the supplied hardware. The manual winch is designed to pull battery out of fork truck.

Manufacturer: Vestil, Manufacturer Part Number: PJ-LIFTUniform Capacity (in.): 500, Boom Length (in.): 22–3/4, Hook from Upright (in.): 19, Fork Pocket Width ID (in.): 7–3/4, Fork Pocket Length ID (in.): 2–3/4, Cable Length (in.) : 80, Cable Length with Hook and Shackle (in.): 88, Construction : Steel, Finish: Water–Based Enamel – The Pallet Truck Hoist is an affordable and practical alternative for lifting and lowering loads to and from elevated work stations. It provides workers with a mobile jib that quickly secures to a standard twenty–seven (27) inch by forty–eight (48) inch pallet truck. Once installed, the pallet truck can still be used with most pallets and skids allowing for transport of heavy pallet loads while retaining the ability to lift and lower loads to and from the pallet. It uses a clutchless cable winch with cable for easy lifting and lowering. This Pallet Truck Hoist has a steel construction with a water–based enamel coat.

Manufacturer: Vestil, Manufacturer Part Number: PM-2748-SCL-LPThe Pallet Truck with Digital Scale allows you to weigh your load on the spot for maximum efficiency. The frame uses heavy-duty steel construction for maximum strength and durability. The unit is very user friendly and is suitable for low height lifting. The built-in scale allows you to weigh your load while it is being handled. The scale is selectable in a variety of increments to adjust to the size of your load. It has keyboard calibration and functional setup with automatic zero capabilities. Digital filtering is used to help compensate for vibration and motion to make the pallet truck with digital scale smooth and accurate. The scale is powered by batteries with AC adapter included. NTEP approval is also available.

Manufacturer: Vestil, Manufacturer Part Number: RDC-1000-DPNDeluxe Rotating Drum Cart Optional Drip Pan with brackets. MFG Part# RDC-1000-DPN