vestil

Manufacturer: Vestil, Manufacturer Part Number: FTA-P-SWCIn warehouses stretch wrap is seemingly always required. But, rolls of wrap can often be elusive; gone the second you need it. That's where the stretch wrap caddy comes in! The stretch wrap caddy is built to hold rolls of wrap when your hands are otherwise in use, like driving a fork truck. The caddy can be attached to the exterior of the fork truck in any position that fits the users' preference and ready for use in a matter of minutes. So stop wasting precious time looking for the roll of stretch wrap and just remember it's in the last place you left it; in the stretch wrap caddy! -Built of durable plastic -Pre-drilled mounting holes -Mounting screws included -High tack adhesive included

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-12-DCUniform Capacity (pounds): 1,200, Accepts: 55–gallon steel drum, Chain (feet): 15 , Drum Rotation (degrees): 360, Fork Pocket Height (in.): 2–1/2, Fork Pocket Width (in.): 7–1/2, DC Voltage: 24 – This Fork Truck Drum Carrier/Rotator allows you to easily transport and rotate steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Carrier/Rotator is provided with a chain to allow the drum to be rotated from the fork truck operator's seat. This DC powered unit includes battery, on–board charger, and hand held control on a long coil cord. Drum must be full to rotate at rated capacity.

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-20Capacity: 2,000 lbs., 10 crank turns per 90° rotation, 15' Chain – Fork Truck Drum Carrier / Rotator – This product allows you to easily transport and rotate 55 gallons steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Each unit is provided with a 15 foot long chain to allow the drum to be rotated up to 360° from the fork truck operator's seat. Fork pockets measure 7" wide by 2" high usable. Safety chain is used to secure unit to fork truck. Bung Nut Wrench included for opening and closing drums.

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-8-DCCapacity: 800 lbs. – Fork Truck Drum Carrier / Rotator – This product allows you to easily transport and rotate 55–gallon steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Fork pockets measure 7" wide by 2" high usable. Safety chain is used to secure unit to fork truck. A bung nut wrench is also included for opening and closing drums. 12V DC Powered Operation. Drum must be full to rotate at rated capacity.

Manufacturer: Vestil, Manufacturer Part Number: SCRAPE-1Blade Width: 12", Overall Size (W x L x H): 13" x 36" x 8", Usable Fork Opening (W x H): 9–1/4" x 3–1/4" – Fork Truck Floor Scraper – Great new product designed to turn your fork truck into a floor scraper. Works well in paint and finish rooms for removing over sprayed paint from floors. Simply slide fork into opening and attach safety restraint to carriage for safety. Features hardened scraping blade for long life and durability. Blade is mounted in pivot assembly to allow it to raise up with contact against a crack or rise in the floor. Heavy–duty welded steel construction. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: FC-29Usable Size (W x H): 7–1/2" x 2–1/2", Casters: 3" to 1" Swivel, Capacity: 2000 lbs. – Fork Truck Fork Caddy – Transport fork truck forks easily and safely. This caddy allows the user to easily remove and install forks onto a fork truck. This is usually a dangerous and time consuming process, but our fork caddy makes this a breeze. After transporting the fork to the fork truck, rotate the handle 90°. Slide the fork onto the mast. The Fork Caddy has easy–grip handles and rolls smoothly on two swivel casters. A locking screw secures the fork into the caddy to keep it in place while transporting. The comfort–grip handle pivots up to 180° to allow for easier mobility. The Fork Caddy is lightweight and small enough for easy storage as well.

Manufacturer: Vestil, Manufacturer Part Number: FRK-LVLDesigned to aid the fork lift driver in determining when the forks are level. Unit reduces the risk of damaging or piercing product when removing it from pallet racking. Fasten the steel leveler to the mast of the fork lift. While tilting the forks to the desired angle, the fork leveler will tilt as well, showing that the forks are not currently in a horizontal position. When forks are moved back into a safe level angle, the leveler will be perfectly horizontally.

Manufacturer: Vestil, Manufacturer Part Number: SPB-P-72Unique design attaches to fork truck forks. Pass through fork tubes keep weight back towards fork truck mast. Locking pins secure snow plow to forks for safety. The steel construction has a brightly colored baked-in powder-coated finish for added toughness and clear visibility. The attached sides contain the snow in a direct manner for time and safety efficiency. MFG Part# SPB-P-72

Manufacturer: Vestil, Manufacturer Part Number : VPS-60A forklift broom is a perfect fit to the maintenance and construction facilities. The polypropylene construction provides a strong and durable unit throughout both indoor and outdoor use. Rows of brush sections can be taken out for a more preferred setup. The long length provides a time saving, efficient unit that will cover an abundance of surface area with less travel time. The simple forklift attachment allows the unit to be used with very short setup time. For best use, utilize the attached fork pockets and connect the safety chains. Once in place, the unit can be maneuvered to gather debris that has been left throughout the workplace. -Steel frame construction with built in fork pockets for maneuverability -Polypropylene brushes for strength and sustainability -Durable for indoor or outdoor use -Long broom length for time efficiency

Manufacturer: Vestil, Manufacturer Part Number : VPS-72A forklift broom is a perfect fit to the maintenance and construction facilities. The polypropylene construction provides a strong and durable unit throughout both indoor and outdoor use. Rows of brush sections can be taken out for a more preferred setup. The long length provides a time saving, efficient unit that will cover an abundance of surface area with less travel time. The simple forklift attachment allows the unit to be used with very short setup time. For best use, utilize the attached fork pockets and connect the safety chains. Once in place, the unit can be maneuvered to gather debris that has been left throughout the workplace. -Steel frame construction with built in fork pockets for maneuverability -Polypropylene brushes for strength and sustainability -Durable for indoor or outdoor use -Long broom length for time efficiency

Manufacturer: Vestil, Manufacturer Part Number: FCB-818Overall Size: 8"W x 18"H – Forklift Carriage Bumper – Protect loads from potential damage with our Fork Truck Carriage Bumper. Simply bolt to forklift carriage with included hardware.

Manufacturer: Vestil, Manufacturer Part Number: FLB-D-10A Forklift Lifting Beam is the perfect asset for maneuvering and transferring heavy objects. The centrally located shackle between two fork pockets allow the user to safely attach to the unit and transport to the desired location. Hooks are also attached to the outside of the unit for a more secure lifting experience. The strong steel construction with a bright finish enables high visibility from both near and far. Secure to the fork truck by means of a long safety restraint and screw clamps. MFG Part# FLB-D-10

Manufacturer: Vestil, Manufacturer Part Number: FRA-4-238For use with 4in wide forks. Includes two 72in long safety chains with quick clasp and a 2?in reel support bar (48in long). Distance between forks not to exceed length of support bar. MFG Part# FRA-4-238

Manufacturer: Vestil, Manufacturer Part Number: FC-4Four Pedal Foot Control – Optional Spare or Replacement foot control for use with Vestil made products.

Designed to prevent spills and safeguard your facility, this Fuel Tank Containment system (Model OTC-275) is ideal for both indoor and outdoor use. Built for longevity, it securely contains fuels, oils, and other hazardous liquids, helping to minimize environmental and financial risks.Key Features• Load Capacity: 275 lbs• Made entirely from recycled polyethylene• Chemical resistant and non-corrosive for enduring performance• Optional Pull Over Cover available for extra protectionProduct Specifications• Dimensions: 84½″ (W) x 43¾″ (D) x 29″ (H) – Designed to fit a variety of fuel tank sizes• Engineered for industrial use, ensuring strong performance in demanding environments• Manufacturer: Vestil – Known for reliability and quality backed by industry expertiseSafety and Compliance• Provides effective spill control to reduce costly hazards• Complies with essential industrial safety standards• Offers corrosion resistance to help maintain a safe storage settingEnjoy worry-free fuel management with this all-inclusive containment solution designed for compliance and effortless maintenance. For additional spill protection solutions, check out our Tank Containment collection. Refer to the detailed installation guidelines and benefit from a setup that's both safe and efficient.

This fuel containment solution is designed to prevent hazardous spills and ensure safe, efficient liquid management across a range of industrial and commercial settings. Engineered for both indoor and outdoor use, this system is ideal for fuels, oils, diesel, and other hazardous liquids, featuring robust construction and an integrated drain for maximum leak protection.Key Features & Specifications• Weight Capacity: Supports up to 550 lb• Construction: Made entirely from 100% recycled, rust-free, all-polyethylene• Versatility: Perfect for fuels, oils, and other hazardous liquids• Drain System: Efficient design with an integrated drain and an optional pull-over cover• Applications: Ideal for industrial, commercial, and field settingsBenefits & Usage DetailsThis fuel spill containment system reduces the risk of costly spill accidents while simplifying maintenance tasks. Its durable design not only meets safety and compliance requirements but also delivers long-term cost savings on cleanup efforts, providing peace of mind in demanding settings.Technical SpecificationsManufacturer: VestilPart Number: OTC-550For more innovative fuel containment solutions, explore our Tank Containment collection or visit the Vestil collection.

Manufacturer: Vestil, Manufacturer Part Number: PM4-2772The Full Featured Pallet Truck is an economical way for one person to move heavy pallet loads without the use of a fork truck! Includes two (2) articulating steering wheels and two (2) front load rollers. The ergonomic design requires only seventy-five (75) pounds of pulling force when fully loaded. Steering wheels include bearing dust covers for added life. Nose wheels are located on the front edge of each fork to assist in clean pallet entrance and exit. Reinforced triple-formed steel forks provide twice the strength of standard single-formed forks. The unit is equipped with internally mounted solid steel adjustable push rods. The spring loaded handle automatically returns to vertical position when not in use. Hydraulic pump design facilitates easy-access seal replacement. Chrome-plated hydraulic pump piston for long seal life.

Manufacturer: Vestil, Manufacturer Part Number: PM4-2796The Full Featured Pallet Truck is an economical way for one person to move heavy pallet loads without the use of a fork truck! Includes two (2) articulating steering wheels and two (2) front load rollers. The ergonomic design requires only seventy-five (75) pounds of pulling force when fully loaded. Steering wheels include bearing dust covers for added life. Nose wheels are located on the front edge of each fork to assist in clean pallet entrance and exit. Reinforced triple-formed steel forks provide twice the strength of standard single-formed forks. The unit is equipped with internally mounted solid steel adjustable push rods. The spring loaded handle automatically returns to vertical position when not in use. Hydraulic pump design facilitates easy-access seal replacement. Chrome-plated hydraulic pump piston for long seal life.

Manufacturer: Vestil, Manufacturer Part Number: PM5-2748The Full Featured Pallet Truck is an economical way for one person to move heavy pallet loads without the use of a fork truck! Includes two (2) articulating steering wheels and two (2) front load rollers. The ergonomic design requires only seventy-five (75) pounds of pulling force when fully loaded. Steering wheels include bearing dust covers for added life. Nose wheels are located on the front edge of each fork to assist in clean pallet entrance and exit. Reinforced triple-formed steel forks provide twice the strength of standard single-formed forks. The unit is equipped with internally mounted solid steel adjustable push rods. The spring loaded handle automatically returns to vertical position when not in use. Hydraulic pump design facilitates easy-access seal replacement. Chrome-plated hydraulic pump piston for long seal life.

Manufacturer: Vestil, Manufacturer Part Number: PRAIL-102-GThe Light Weight Crowd Control Interlocking Barrier is attractive and the functional design is ideal for directing personnel. Interlocking portable railing has many commercial and industrial applications. Easy to move to meet changing needs. Upright bars are vertically spaced. Each railing includes connectors to attach multiple units together to form long runs. Feet are removable so railing will lay flat for shipping and storage.

Manufacturer: Vestil, Manufacturer Part Number: CAN-BH-5516-GALVHave you had a difficult time keeping the bag secured in your trash receptacle? Does the bag continuously fall into the can itself, causing extra cleaning time? If so, the trash topper ring is just what you need! This ring is specifically designed to hold the bag in place around the can itself, while continuing to provide ample access for trash and debris to be placed within the drum. -16" opening diameter -Fits fifty-five gallon open head drums -Minimizes exposure to rigid or sharp edges -Galvanized finish for increased durability

Manufacturer: Vestil, Manufacturer Part Number: CAN-BH-558-GALVHave you had a difficult time keeping the bag secured in your trash receptacle? Does the bag continuously fall into the can itself, causing extra cleaning time? If so, the trash topper ring is just what you need! This ring is specifically designed to hold the bag in place around the can itself, while continuing to provide ample access for trash and debris to be placed within the drum. -8" opening diameter -Fits fifty-five gallon open head drums -Minimizes exposure to rigid or sharp edges -Galvanized finish for increased durability

Manufacturer: Vestil, Manufacturer Part Number: SPL-4848The Steel Pallet with Galvanized Finish is heavy-duty, non reversible welded steel. Unit has a 2-way entry allowing fork truck access only. The galvanized finish is used for rust resistance.

Manufacturer: Vestil, Manufacturer Part Number: WTJ-2-G-DCInstalled in your pick-up truck bed, this winch operated jib crane will help lift loads. Lift items from ground to truck bed height, then rotate into cargo area. Includes telescopic boom design with manual hydraulic hand pump to pivot boom up and down. DC powered cable winch to lift and lower loads. Unit comes with one fixed hook, one chain slot lock, and one cable hook with latch. -Simple base installation -Powered unit for quick lifting -Large capacity for heavy loads -Wide lift range for maneuvering products