zing

Manufacturer: Zing, Manufacturer Part Number: 1962V ZING Projecting V Sign, "Hand Washing Station," clearly designates hand washing locations. The two-sided projecting design significantly increases visibility, and is ideal for communicating critical safety messages. The sign is made in the USA from 70% post-consumer recycled plastic, and measures 7"H x 12"W x 5" projecting. The sign features pre-drilled mounting holes, and comes with adhesive tabs for easy installation. Recycled materials support sustainability initiatives and LEED credits.

Manufacturer: Zing, Manufacturer Part Number: 7514 The Pull Handle Butterfly Valve Lockout provides an easy-to-use lockout solution for butterfly valves. According to OSHA regulations, energy isolation points like butterfly valves must be locked out during maintenance and repair. This device installs in 4 simple steps: (1) Place the cylinder over the pull handle. (2) Place the end cap over the valve stem. (3) Connect the cylinder to the end cap. (4) Lockout with a lockout padlock. The device is resistant to cracking, abrasions, heat, and cold. It can be used for indoor or outdoor applications.

Manufacturer: Zing, Manufacturer Part Number: 7805 Plug lockout device is made from polycarbonate/ABS plastic and can cover panel controls up to 2 3/4" x 2 3/4". Accepts up to two padlocks with a shackle diameter of up to 0.25". Supports compliance with OSHA standard 1910.147

Manufacturer: Zing, Manufacturer Part Number: 7806 Plug lockout device is made from polycarbonate/ABS plastic and can cover panel controls up to 2 3/4" x 5". Accepts up to two padlocks with a shackle diameter of up to 0.25". Supports compliance with OSHA standard 1910.147

Manufacturer: Zing, Manufacturer Part Number: 7689 Station includes a rigid plastic high visibility backboard with durable powder coated steel binder holder and one 1.5" SDS binder. Mounting hardware included. 20" X 14" X .125"

Manufacturer: Zing, Manufacturer Part Number: 7447 72 lb. Solid Tire Rubber Base: Will Not Tip In Strong Winds, Does Not Need Sand or Water, and Requires No Maintenance! Zing's Signpost Base holds parking, traffic, and policy signs firmly in place. The base is made in the USA from recycled tire rubber, and supports sustainability initiatives and LEED credits. The recycled rubber construction is weather-proof and virtually maintenance free. The base will not rust, crack, chip, crumble, or corrode, and the aerodynamic design is resistant to strong winds. Zing& galvanized steel signposts are sturdy, durable, and rust-proof. The posts measure 5" H x 1-3/4" W. All four sides feature 3/8" diameter mounting holes spaced 1" apart along the center of the post, which allows customers to adjust the height of the sign. Two signs can be mounted on opposite sides of the same post. Base Features: ¥ 72 lb. aerodynamic design withstands strong winds and severe weather. No sand or water required. ¥ Promotes safety and minimizes liability & damage in vehicle or pedestrian incidents. ¥ The base will not rust, chip, crack, crumble, corrode, or need repainting. ¥ Easy to install. ¥ Can be tipped and rolled to new locations. ¥ Made from 100% post-consumer recycled tire rubber. ¥ Limited lifetime warranty.

Manufacturer: Zing, Manufacturer Part Number: 7423 72 lb. Solid Tire Rubber Base: Will Not Tip In Strong Winds, Does Not Need Sand or Water, and Requires No Maintenance! Zing's Signpost Base holds parking, traffic, and policy signs firmly in place. The base is made in the USA from recycled tire rubber, and supports sustainability initiatives and LEED credits. The recycled rubber construction is weather-proof and virtually maintenance free. The base will not rust, crack, chip, crumble, or corrode, and the aerodynamic design is resistant to strong winds. Features: ¥ 72 lb. aerodynamic design withstands strong winds and severe weather. No sand or water required. ¥ Promotes safety and minimizes liability & damage in vehicle or pedestrian incidents. ¥ The base will not rust, chip, crack, crumble, corrode, or need repainting. ¥ Easy to install. ¥ Can be tipped and rolled to new locations. ¥ Made from 100% post-consumer recycled tire rubber. ¥ Limited lifetime warranty. Specifications: ¥ 18" width x 14" height. ¥ 72 lbs. Under the 75 lb. OSHA occupational lifting limit. ¥ Round holes support posts with a 2-3/8" diameter. ¥ Supports any sign up to 24" diameter. ¥ Made in the USA. ¥ Patents pending.

Manufacturer: Zing, Manufacturer Part Number: 7425 72 lb. Solid Tire Rubber Base: Will Not Tip In Strong Winds, Does Not Need Sand or Water, and Requires No Maintenance! Zing's Signpost Base holds parking, traffic, and policy signs firmly in place. The base is made in the USA from recycled tire rubber, and supports sustainability initiatives and LEED credits. The recycled rubber construction is weather-proof and virtually maintenance free. The base will not rust, crack, chip, crumble, or corrode, and the aerodynamic design is resistant to strong winds. Features: ¥ 72 lb. aerodynamic design withstands strong winds and severe weather. No sand or water required. ¥ Promotes safety and minimizes liability & damage in vehicle or pedestrian incidents. ¥ The base will not rust, chip, crack, crumble, corrode, or need repainting. ¥ Easy to install. ¥ Can be tipped and rolled to new locations. ¥ Made from 100% post-consumer recycled tire rubber. ¥ Limited lifetime warranty. Specifications: ¥ 18" width x 14" height. ¥ 72 lbs. Under the 75 lb. OSHA occupational lifting limit. ¥ Square holes support posts 1-3/4" wide. ¥ Supports any sign up to 24" diameter. ¥ Made in the USA. ¥ Patents pending.

Manufacturer: Zing, Manufacturer Part Number: 20159S Zing Eco Safety Sign, "Face Mask Required with Pictogram," clearly communicates critical safety information.Self-adhesivesigns are made from a minimum of 70% post-industrial polystyrene, and are resistant to solvents, moisture, scuffing, tears and UV exposure.

Manufacturer: Zing, Manufacturer Part Number: 20159A Zing Eco Safety Sign, "Face Mask Required with Pictogram," clearly communicates critical safety information.Aluminumsigns are made from 94% recycled materials. The signs are printed with UV-resistant inks, and are suitable for indoor and outdoor use. The signs are pre-drilled for easy mounting.

Manufacturer: Zing, Manufacturer Part Number: 10159S Zing Eco Safety Sign, "Face Mask Required with Pictogram," clearly communicates critical safety information.Self-adhesivesigns are made from a minimum of 70% post-industrial polystyrene, and are resistant to solvents, moisture, scuffing, tears and UV exposure.

Manufacturer: Zing, Manufacturer Part Number: 10159A Zing Eco Safety Sign, "Face Mask Required with Pictogram," clearly communicates critical safety information. Aluminum signs are made from 94% recycled materials. The signs are printed with UV-resistant inks, and are suitable for indoor and outdoor use. The signs are pre-drilled for easy mounting.

Manufacturer: Zing, Manufacturer Part Number: 10159 Zing Eco Safety Sign, "Face Mask Required with Pictogram," clearly communicates critical safety information. Plastic signs are made from a minimum of 70% post-consumer recycled materials and are printed with UV-resistant inks. The signs are pre-drilled for easy mounting, and include adhesive mounting tabs. Impact-resistant plastic is suitable for indoor or outdoor use.

Manufacturer: Zing, Manufacturer Part Number: 7443 Yellow cover provides a high-visibility base for parking or traffic applications. Plastic construction. For use with rubber signpost base. Supports 1-3/4" poles.

Manufacturer: Zing, Manufacturer Part Number: 7441 Zing's Sign Base Moving Cart allows sign bases to be easily moved from one location to another. The cart is specifically designed to accommodate our recycled signpost bases. The cart slips directly under the sign base, which can then be easily tilted and wheeled to a new location, using the post as a handle. The moving cart is made in the USA from high-performance welded steel, and the wheels are made from durable, weather-proof plastic. ¥ 18" Width x 9" Height. ¥ 8 lbs. ¥ Welded steel body with plastic wheels. ¥ Fits Zing sign bases. ¥ Allows sign bases to be easily moved to new locations. ¥ Made in the USA.

Manufacturer: Zing, Manufacturer Part Number: 7440 The Sign Base Weight attaches to our Sign Base for added stability. Recommended for high-wind areas, or for supporting large traffic signs. The Sign Base Weight is made in the USA from 100% post-consumer recycled tire rubber. ¥ 23" Wide x 6" Tall, recessed center for the RubberForm Sign Base to sit in ¥ Added 75 pounds to our 72-pound Sign Base ¥ For high-wind areas and larger traffic signs ¥ 100% Post-Consumer Recycled Tire Rubber

Manufacturer: Zing, Manufacturer Part Number: 2830AZing's Texas State-specific Handguns Prohibited sign complies with state law requirements. The sign is made in the USA from recycled aluminum and measures 24" x 18".

Manufacturer: Zing, Manufacturer Part Number: 1884SZing No Exit adhesive sign meets NFPA font size requirements. The labels measure 5" x 7" and are sold 2/pack.

Manufacturer: Zing, Manufacturer Part Number: 1957SZING Eco Safety Labels, "No Smoking Oxygen in Use", communicates messages that inform of designated areas and important safety precautions, 70% post-industrial recycled polystyrene self-adhesive, resistant to solvents, moisture, scuffing, tears and UV exposure, supports sustainability initiatives and LEED credits, measures 5"H x 3"W, 2/Pk, Made in the USA.

Manufacturer: Zing, Manufacturer Part Number: 1956SZING Eco Safety Sign, "No Smoking Oxygen in Use", communicates messages that inform of designated areas and important safety precautions, 70% post-industrial recycled polystyrene self-adhesive, resistant to solvents, moisture, scuffing, tears and UV exposure, supports sustainability initiatives and LEED credits, measures 9"H x 2"W, Made in the USA.

Manufacturer: Zing, Manufacturer Part Number: 1957MZING Eco Safety Sign "No Smoking Oxygen in Use", communicates messages that inform of designated areas and important safety precautions, complies with 29 CFR 1910.1030(g)(1), Vinyl Magnetic, resistant to solvents, moisture, scuffing, tearing and UV exposure, magnetic mount, 5"H x 3"W, Made in the USA.

Manufacturer: Zing, Manufacturer Part Number: 7606Single-pole lockout fits circuit breaker toggles up to 1/2" wide, without a recess hole in the toggle. Made from durable plastic. Fast and easy to install.

Manufacturer: Zing, Manufacturer Part Number: 7621The multiple-button hoist control lockout encloses hoist controls or plug lockouts with a durable fabric cover. The fabric cover measures 9" x 18" and features an enclosed leather belt that accepts up to 6 padlocks.

Manufacturer: Zing, Manufacturer Part Number: 7508 Small plug lockout locks out 110V plugs and features a 0.5" closed hole diameter. The device measures 3.25" L x 2.5" W x 2"D and accepts up to 4 padlocks. Durable plastic construction.