vestil

Manufacturer: Vestil, Manufacturer Part Number: SAC-1012Arm Length (in.): 12, Uniform Capacity per Side (pounds): 26,500, Component: Single–Sided Upright – Structural Cantilever Racking offers flexibility to custom–fit individual applications. The unique bolt together construction with welded steel components offers a great combination of strength and durability. Individual components are sold separately to accommodate your requirements. Arms attach to this single–sided upright with a "C" clamps that are infinitely adjustable.

Manufacturer: Vestil, Manufacturer Part Number: CH-10-12Lifting Capacity: 1,000 lbs., Maximum Coil Width: 12", Minimum Coil Radial: 13", Minimum Inside Diameter: 13" – Overhead Coil Hook – Designed for lifting heavy coils with an overhead lifting device. Easily position coils from horizontal to vertical position. Steel construction with painted finish.

Manufacturer: Vestil, Manufacturer Part Number: VTR-7-14-12Uniform Capacity (lbs.): 5500, Working Height Minimum (in.): 32–1/2, Working Height Maximum (in.): 46, Usable Width (in.): 14, Curb Height (in.): 1–1/4 – The Aluminum Vehicle Twin Ramps provide a safe means for driving vans, pick–up trucks and some passenger vehicles from ground level into and out of high building entrances. The ramps can be securely fastened to dock with pin locks. To avoid hang–ups with the vehicle, measure the under clearance and wheelbase of the vehicle being used. The ramps have a welded aluminum construction.

Manufacturer: Vestil, Manufacturer Part Number: ATS-10-68Number of Steps: 14, Top Step Height: 120", Length: 54.75", Step Angle: 68 degrees – Alternating–Tread Stairs – Design offers a shorter span than traditional steps. Features handrail on each side of unit, dual safety chain at top of stair and formed steel steps with raised surfaces for better traction. Rugged welded steel construction. Powder coated safety yellow finish. Ships knockdown for lower freight costs.

Manufacturer: Vestil, Manufacturer Part Number: ATS-10-56Number of Steps: 16, Top Step Height: 120", Length: 84.38", Step Angle: 56 degrees – Alternating–Tread Stairs – Design offers a shorter span than traditional steps. Features handrail on each side of unit, dual safety chain at top of stair and formed steel steps with raised surfaces for better traction. Rugged welded steel construction. Powder coated safety yellow finish. Ships knockdown for lower freight costs.

Manufacturer: Vestil, Manufacturer Part Number: D-350-10Projection: 10", Overall Height: 120", Overall Width: 120" – Dock Seal – For use with an 8'W x 9'H door. Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through–the–wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-350-11Projection: 11", Overall Height: 120", Overall Width: 120" – Dock Seal – For use with an 8'W x 9'H door. Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through–the–wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-350-12Projection: 12", Overall Height: 120", Overall Width: 120" – Dock Seal – For use with an 8'W x 9'H door. Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through–the–wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-350-13Projection: 13", Overall Height: 120", Overall Width: 120" – Dock Seal – For use with an 8'W x 9'H door. Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through–the–wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-350-14Projection: 14", Overall Height: 120", Overall Width: 120" – Dock Seal – For use with an 8'W x 9'H door. Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through–the–wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-350-15Projection: 15", Overall Height: 120", Overall Width: 120" – Dock Seal – For use with an 8'W x 9'H door. Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through–the–wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-350-16Projection: 16", Overall Height: 120", Overall Width: 120" – Dock Seal – For use with an 8'W x 9'H door. Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through–the–wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-350-17Projection: 17", Overall Height: 120", Overall Width: 120" – Dock Seal – For use with an 8'W x 9'H door. Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through–the–wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-350-18Projection: 18", Overall Height: 120", Overall Width: 120" – Dock Seal – For use with an 8'W x 9'H door. Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through–the–wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-350-19Projection: 19", Overall Height: 120", Overall Width: 120" – Dock Seal – For use with an 8'W x 9'H door. Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through–the–wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-350-20Projection: 20", Overall Height: 120", Overall Width: 120" – Dock Seal – For use with an 8'W x 9'H door. Superior 36 oz. nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through–the–wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection* Dock Seal. To ensure proper size complete and fax the survey sheet. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: CSEC-120Outside Diameter: 1–1/4", Length: 119–7/8" – Steel Square Safety Handrail – Includes 2 Connection Tubes, sold as each.

Manufacturer: Vestil, Manufacturer Part Number: SQ-120Square Tube (O.D.): 1–5/8", Overall Height: 42", Mid–Rail Height: 21", Length: 120" – Steel Square Safety Handrails – An economical way to protect people and machinery. Applications include loading docks, floor openings, walkways, and mezzanines. Highly visible safety yellow powder coat finish. Available with or without toeboards as application requires.

Manufacturer: Vestil, Manufacturer Part Number: SQ-120-TBSquare Tube (O.D.): 1–5/8", Overall Height: 42", Mid–Rail Height: 21", Length: 120" – Steel Square Safety Handrails – An economical way to protect people and machinery. Applications include loading docks, floor openings, walkways, and mezzanines. Highly visible safety yellow powder coat finish. Available with or without toeboards as application requires.

Manufacturer: Vestil, Manufacturer Part Number: VCH-46CWatts: 1500, Volts: 120, Phase: 1, BTU's: 5,120 – Quartz Infrared Spot Heaters – Keep your cooler work areas well heated with these Infrared Heaters. The Quartz tube radiates a blanket of heat in a 60° symmetrical pattern. Unit includes; bright aluminum reflector and end caps, mounting chains, S–hooks and a cordset with plug. Units can be hung from the ceiling with mounting chains or surface mounted. Built–in brackets used in surface mounting allow up to a 45° horizontal tilt adjustment.

Manufacturer: Vestil, Manufacturer Part Number: LO-J-125Uniform Static Capacity (lbs.): 125000, Uniform Lifting Capacity (lbs.): 50,000, Service Range Minimum (in.): 39, Service Range Max (in.): 51, Wheel Size (in.): 10, Wheel Type: Hard Rubber, Top Cap Diameter (in.): 8 – The Trailer Stabilizing Jack is used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. This Jack is made of high strength steel construction with a flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.

Manufacturer: Vestil, Manufacturer Part Number: D-750-18Overall Height: 126", Overall Width: 132", Projection: 18" – Dock Shelter – For use with doors up to 10'W x 10'H. Reduces oversized doors to match truck opening. Long wear Vestex V–42 fabric is highly resistant to abrasion and tearing. Fiberglass staves are sewn into the flaps. Seal is formed along the sides and top of trailer when the vertical and top panels are pushed inward by the trailer. Recommend minimum 10" trailer penetration for a good seal. Supporting structure is made of 2 x 4 wolmanized lumber. Shelter is protected by safety yellow steel guide protectors. The top header piece measures 132"W and contains a drop curtain which measures 36"H. Two vertical pieces measure 126" tall with vertical flaps measuring 21"W. When installed the shelter will close door opening down to 90"W x 90"H opening (between flaps). Includes two yellow steel guide protectors and foam–filled corner pads for extra sealing action.

Manufacturer: Vestil, Manufacturer Part Number: D-750-30Overall Height: 126", Overall Width: 132", Projection: 30" – Dock Shelter – For use with doors up to 10'W x 10'H. Reduces oversized doors to match truck opening. Long wear Vestex V–42 fabric is highly resistant to abrasion and tearing. Fiberglass staves are sewn into the flaps. Seal is formed along the sides and top of trailer when the vertical and top panels are pushed inward by the trailer. Recommend minimum 10" trailer penetration for a good seal. Supporting structure is made of 2 x 4 wolmanized lumber. Shelter is protected by safety yellow steel guide protectors. The top header piece measures 132"W and contains a drop curtain which measures 36"H. Two vertical pieces measure 126" tall with vertical flaps measuring 21"W. When installed the shelter will close door opening down to 90"W x 90"H opening (between flaps). Includes two yellow steel guide protectors and foam–filled corner pads for extra sealing action.

Manufacturer: Vestil, Manufacturer Part Number: D-750-36Overall Height: 126", Overall Width: 132", Projection: 36" – Dock Shelter – For use with doors up to 10'W x 10'H. Reduces oversized doors to match truck opening. Long wear Vestex V–42 fabric is highly resistant to abrasion and tearing. Fiberglass staves are sewn into the flaps. Seal is formed along the sides and top of trailer when the vertical and top panels are pushed inward by the trailer. Recommend minimum 10" trailer penetration for a good seal. Supporting structure is made of 2 x 4 wolmanized lumber. Shelter is protected by safety yellow steel guide protectors. The top header piece measures 132"W and contains a drop curtain which measures 36"H. Two vertical pieces measure 126" tall with vertical flaps measuring 21"W. When installed the shelter will close door opening down to 90"W x 90"H opening (between flaps). Includes two yellow steel guide protectors and foam–filled corner pads for extra sealing action.