Under $25

Manufacturer: Justrite, Manufacturer Part Number: 28216Aerosolv is the safe and economical way to dispose of aerosol cans. Safe, convenient and compliant, Aerosolv provides an easy–to–use, effective method of relieving pressure in spent aerosol cans. It changes them from solid hazardous waste to a non–hazardous, fully–recyclable state. This eliminates the expense of solid waste disposal of aerosol cans. Every 100 cans punctured and emptied by Aerosolv increases recyclable scrap metal by 25 lb. and reduces solid waste by 10 cubic feet, making Aerosolv extremely cost–effective. As an added benefit, residual liquids may be eligible for reclamation or recycling, resulting in "waste–minimization credits". The contents of over 4,000 spent aerosols may be collected in just one 55–gallon drum.

Manufacturer: Justrite, Manufacturer Part Number: 11022This is a GASKET–PT & QT COVER ASSY.

Manufacturer: Justrite, Manufacturer Part Number: 8183GASKET – TIPOVER KIT for Safety Drum Funnels.

Manufacturer: Justrite, Manufacturer Part Number: 11025 Drum Covers provide an inexpensive way to convert open–top 30– and 55–gallon steel drums into fire–safe receptacles for combustible trash. Only a screwdriver and wrench are needed to attach the cover to a drum, and it can easily be removed when the drum must be emptied. Covers are steel, with a highly chemical–resistant powder coat paint finish. 30–gallon cover will fit drums nominally 18.375" diameter. 55–gallon size will fit drums from 22.5" to 22.75" diameter. On models 26730 and 26750, a replaceable fusible–link assembly inside the cover melts at 165°F to automatically slam the cover shut if there is a fire in the drum to extinguish the flame. To control vapors when disposing of solvent soaked rags and wipes, model 26752 offers a gasketed, latched lid to seal the drum preventing vapor release. A vent is provided to relieve pressure build–up under elevated temperatures, between 3 and 5 psig.

Manufacturer: Justrite, Manufacturer Part Number: 11407This is a GASKET VOLARA for NON–METAL DISP CANS.

Manufacturer: Zing, Manufacturer Part Number: 7807 Gate Valve Lockout fits handle sizes from 1" to 2.5". The device is made from steel and accommodates up to 2 padlocks.

Manufacturer: Zing, Manufacturer Part Number: 7808 Gate Valve Lockout fits handle sizes from 2.5" to 5". The device is made from steel and accommodates up to 3 padlocks.

Manufacturer: First Aid Only, Manufacturer Part Number: AN206ACGauze Pads, 3" x 3", 8/Box - Model Number: AN206|UOM: BX/CS - First Aid and Emergency Products - Wound Care - Bandages, Pads, and Dressings

Manufacturer: First Aid Only, Manufacturer Part Number: B207ACGauze Pads, 4" x 4", 4/Box - Model Number: B207|UOM: BX - First Aid and Emergency Products - Wound Care - Bandages, Pads, and Dressings

Manufacturer: First Aid Only, Manufacturer Part Number: FAE5002ACFor Smart Compliance cabinets with the SmartTab EzRefill™ system. - Model Number: FAE5002|UOM: EA - First Aid and Emergency Products - First Aid Kits - SmartCompliance - SmartCompliance Refills

Manufacturer: First Aid Only, Manufacturer Part Number: FAE5006ACGauze Roll Bandage, 3", 1/Each - Model Number: FAE5006|UOM: EA - First Aid and Emergency Products - First Aid Kits - SmartCompliance - SmartCompliance Refills

Manufacturer: Apex Tool Group, Manufacturer Part Number: 84325GWOff-corner loading design reduces fastener rounding. Features      - Chrome molybdenum alloy steel construction      - Manganese phosphate coated      - Laser-etched/hard-stamped markings      - 1/Each - Model Number: 84325|UOM: EA - Tools and Tool Storage - GearWrench - Ratchets, Sockets, and Drive Tools

Manufacturer: Apex Tool Group, Manufacturer Part Number: 82259GWStriking quality. Features      - Solid hickory handle      - 16 oz rubber head      - 1/Each - Model Number: 82259|UOM: EA - Tools and Tool Storage - GearWrench - Striking and Struck Products

Manufacturer: Checkers, Manufacturer Part Number: GEO-2.4 The GeoGrid® from Checkers™ is a cellular grid paving system that enables the fast and efficient implementation of permanent ground reinforcement and stabilization. The grids of the ground reinforcement cellular system allow the dispersion of excess rain and flood water. It is ideal for integration into Sustainable Urban Drainage Systems (SUDS) and in areas prone to flooding or with water dispersion problems. GeoGrid® is also ideal for use in car parks, access routes, gateway or entrance areas, equestrian areas, fire and emergency routes, private driveways or golf cart paths. If you need a driveway grid system, this product can help with that. Manufactured from 100% recycled high-density polyethylene and features an effective and simple interlocking design for fast and efficient installation, the grids can be lifted directly from the pallet as pre-connected 1 m² sections. GeoGrid® Standard can support loads of up to 350 tons per m² and Premium up to 500 tons per m². GeoGrid® can be filled in with aggregate or decorative stones to provide robust ground reinforcement in areas of high pedestrian or vehicle use and can also be seeded with grass to provide an environmentally friendly and aesthetic grass stabilization grid solution. There is also an option of white or hi-vis demarcation blocks ideal for use where there is a requirement for indicating specific zones such as in car parks, depot areas, disabled parking bays, and traffic flow directions. *Load bearing capacity is dependent on ground conditions.  Sizing is subject to manufacturing variance of +/- 5%. 100% recycled high-density polyethylene (HDPE) Premium option supports loads of up to 500 tons per m² Pre-connected in 1m² sections (UK only) Interlocking design for fast installation Durable and lightweight Available in Standard or Premium depending on load bearing requirements Can be filled in with decorative stones, seeded with grass or with high visibility inserts GeoGrid® ground reinforcement and stabilization grids can equal or better the axle or point load performance of other currently available 40mm or 50mm cellular geopavers.

Manufacturer: Incom, Manufacturer Part Number: GHS1004Our HazCom GHS Wall Chart provides a comprehensive overview of new HazCom GHS labeling requirements. ***A $10.00 handling fee will be added to freight for all GHS product orders under $100.00*** SPECIFICATIONSGHS info chart

Manufacturer: Salsbury Industries, Manufacturer Part Number : 2072Glass Window - for Brass Mailbox #2 Door

Manufacturer: Zing, Manufacturer Part Number: 7497 Glove Dispenser Display Racks are made from six gauge steel wire with a durable powder-coated finish. The Rack measures 4.5 ”H x 4 ”W x 11.5 ”L and stores 1 box of gloves.

Manufacturer: Zing, Manufacturer Part Number: 7498 Glove Dispenser Display Racks are made from six gauge steel wire with a durable powder-coated finish. The Rack measures 10.5 ”H x 4 ”W x 11.5 ”L and stores 2 boxes of gloves.

Manufacturer: Zing, Manufacturer Part Number: 7499Glove Dispenser Display Racks are made from six gauge steel wire with a durable powder-coated finish. The Rack measures 14.5 ”H x 4 ”W x 11.5 ”L and stores 3 boxes of gloves.

Manufacturer: First Aid Only, Manufacturer Part Number: 750013ACHand Sanitizer Packets, 0.9 g, 10/Box - Model Number: 750013|UOM: BX - First Aid and Emergency Products - Wound Care - Antiseptics and Ointments

Manufacturer: Checkers, Manufacturer Part Number: AMHHAdd to installation speed and saves time when tracking equipment. Reduces back stress and makes moving and retrieving mats easy, even in wet areas.

Manufacturer: Heskins, Manufacturer Part Number: FM09Safety floor markers are constructed from a durable PVC with a strong self-adhesive base. Tough enough to withstand forklift traffic

Manufacturer: Vestil, Manufacturer Part Number: CS-33-KIT-3Concrete hardware kit includes 3 bolts, anchors and washers. ***This item by itself does not meet the manufacturer's (Vestil) $50.00 minimum order requirement. You would need to order enough quantity of this item or other Vestil items to reach the $50.00 mark to complete an order. Please contact us for assistance.***SPECIFICATIONS4" x 2" x 2" - 4 lbs.

Manufacturer: Zing, Manufacturer Part Number: 7361Coated hasps are highly visible and easy to grip. Accepts padlocks with a shackle diameter up to 0.35 ” and accommodates up to 6 locks. The hasp measures 2.5 ”H x 5 ”W x 0.35 ”D with a 1.5" jaw diameter.