Manufacturer: Little Giant, Manufacturer Part Number: IP-1832-2TLAll welded steel construction means years of rugged service and no assembly. Two shelf models provides for additional storage or transport capacity. All models are 34" high and feature 4 swivel casters for increased mobility, and 5" non–marking polyurethane wheels with ball bearings. This table comes with total lock casters. 1,000–lbs Capacity. Dimensions: 18" x 32".

Manufacturer: Little Giant, Manufacturer Part Number: IP-2448-2All welded steel construction means years of rugged service and no assembly. Two shelf models provides for additional storage or transport capacity. All models are 34" high and feature 4 swivel casters for increased mobility, and 5" non–marking polyurethane wheels with ball bearings. Wheel brakes are optional. 1,000–lbs Capacity. Dimensions: 24" x 48".

Manufacturer: Little Giant, Manufacturer Part Number: IP-2436-2TLAll welded steel construction means years of rugged service and no assembly. Two shelf models provides for additional storage or transport capacity. All models are 34" high and feature 4 swivel casters for increased mobility, and 5" non–marking polyurethane wheels with ball bearings. This table comes with total lock casters. 1,000–lbs Capacity. Dimensions: 24" x 36".

Manufacturer: Little Giant, Manufacturer Part Number: WW-3060-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 30" x 60". Capacity: 10,000–lbs.

Manufacturer: Durham, Manufacturer Part Number: FED-2023-95MOBILE SHOP DESK-2DR, #95 GRAY

Manufacturer: Durham, Manufacturer Part Number: EAS-2436-65TEasy Access Shelf Cart with 5" x 1-1/4" Polyurethane casters, (2) rigid and (2) swivel with side breaks, 2 shelves, 1-1/2" lips up on bottom shelf and tubular push handle, blue

Manufacturer: Little Giant, Manufacturer Part Number: IP-1832RM-BRKAll welded steel construction means years of rugged service and no assembly. Single shelf model with open style cross–arm base serves as a workbench where seating is required. All models are 34" high and feature 4 swivel casters for increased mobility, and 5" non–marking polyurethane wheels with ball bearings. Wheel brakes are standard on single shelf models. 1,000–lbs Capacity. Dimensions: 18" x 32".

Manufacturer: Little Giant, Manufacturer Part Number: IP-2436-2All welded steel construction means years of rugged service and no assembly. Two shelf models provides for additional storage or transport capacity. All models are 34" high and feature 4 swivel casters for increased mobility, and 5" non–marking polyurethane wheels with ball bearings. Wheel brakes are optional. 1,000–lbs Capacity. Dimensions: 24" x 36".

Manufacturer: Little Giant, Manufacturer Part Number: IP-1832-2BRKAll welded steel construction means years of rugged service and no assembly. Two shelf models provides for additional storage or transport capacity. All models are 34" high and feature 4 swivel casters for increased mobility, and 5" non–marking polyurethane wheels with ball bearings. This table comes with wheel brakes. 1,000–lbs Capacity. Dimensions: 24" x 36".

Manufacturer: Little Giant, Manufacturer Part Number: WW-3660-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 36" x 60". Capacity: 10,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WW3672-HD-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Workbench comes with a 26"W x 20"D x 6"H (Center Mount) drawer with padlock hasp. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 36" x 72". Capacity: 10,000–lbs.

Manufacturer: Durham, Manufacturer Part Number: EAS-1832-95Easy Access Shelf Cart with 5" x 1-1/4" Polyurethane casters, (2) rigid and (2) swivel with side breaks, 2 shelves, 1-1/2" lips up on bottom shelf and tubular push handle, gray

Manufacturer: Little Giant, Manufacturer Part Number: WW-3672-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 36" x 72". Capacity: 10,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WW-4284-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 42" x 84". Capacity: 10,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WW3660-HD-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Workbench comes with a 26"W x 20"D x 6"H (Center Mount) drawer with padlock hasp. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 36" x 60". Capacity: 10,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WST2-3072-AHSmooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Half depth 12 gauge lower shelf with lip at rear provides room for additional storage while leaving ample room for legs when seated. Capacity 500 lbs. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Capacity: 5,000–lbs. Dimensions: 30" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: WW-3048-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 30" x 48". Capacity: 10,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WW3036-HD-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Workbench comes with a 26"W x 20"D x 6"H (Center Mount) drawer with padlock hasp. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 30" x 36". Capacity: 10,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WST2-3684-AHSmooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Half depth 12 gauge lower shelf with lip at rear provides room for additional storage while leaving ample room for legs when seated. Capacity 500 lbs. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Capacity: 5,000–lbs. Dimensions: 36" x 84".

Manufacturer: Little Giant, Manufacturer Part Number: WW3060-HD-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Workbench comes with a 26"W x 20"D x 6"H (Center Mount) drawer with padlock hasp. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 30" x 60". Capacity: 10,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WW-3036-ADJHeavy Duty Welded Workbenches have an extra strong 7 gauge (0.180 inch) reinforced steel top with rounded comfort edges that can support up to10,000 lbs. UDL. Heavy 2" x 2" angle legs are 1/4"–thick with welded 7 gauge gussets. The stationary models have 3" x 3" x 1/4" footpads with a 5/8"–diameter anchor hole. A sturdy 12 gauge lower shelf has a 500 lbs. capacity for added storage. All models are welded and ship set up, ready for immediate use. Adjustable height ranges from 28" to 38" high on 1" centers. Dimensions: 30" x 36". Capacity: 10,000–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: WST1-3684-AHSmooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Angle iron cross braces are centered to allow leg room on both sides. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Capacity: 5,000–lbs. Dimensions: 36" x 84".

Manufacturer: Little Giant, Manufacturer Part Number: WST2-3672-AHSmooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Half depth 12 gauge lower shelf with lip at rear provides room for additional storage while leaving ample room for legs when seated. Capacity 500 lbs. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Capacity: 5,000–lbs. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: WST1-2460-AHSmooth 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. Legs and lower braces are 1–1/2" x 1–1/2" x 3/16" thick angle iron. Legs have 2" square footpads with 9/16" hole for mounting to the floor. Angle iron cross braces are centered to allow leg room on both sides. Legs are adjustable from 27" to 41" high on 2" centers. 12 gauge steel top is double–reinforced with angle iron on the underside and gussets in the corners for exceptional strength and rigidity. These all–welded units ship fully assembled and ready for immediate use. Capacity: 5,000–lbs. Dimensions: 24" x 60".