Tables, Benches and Platforms

Manufacturer: Pucel, Manufacturer Part Number: CF-3630Rugged cabinets with 1–1/8" tray coolant tops with 1/2" pipe connection. Equipped with 1/2" drain to handle fluids, lubricants, etc. Fabricated with floor lugs to secure base to floor. Equipped with bottom shelf. Dimensions: 20"D x 36"W x 30"H. 3,000–lbs Capacity. Options: Cylinder locks, No. 1015 removable side shelf.

Manufacturer: Vestil, Manufacturer Part Number: POS-3648Platform Size (W x L): 36" x 48", Lowered Height: 3", Raised Height: 19", Capacity: 500 lbs., Operation: Hand Crank – Posi–Crank Worker Platforms – The Posi–Crank ergonomic work station is an economical variable height work positioner. With a simple turn of a crank, the platform height may be adjusted to the optimum ergonomic level suitable for each operator. Benefits of the Posi–Crank include minimizing the risk of cumulative trauma injuries, back injuries and fatigue, while maximizing efficiency and operator morale. The Posi–Crank incorporates the use of ACME threaded rods and a series of gears for simple yet effective height adjustment. The crank handle may be removed for maximizing the operating space. The deck is constructed of steel treadplate for strength and better traction.

Manufacturer: Vestil, Manufacturer Part Number: BTT-6-36Platform Size: 28"W x 36"L x 2"H, Capacity: 600 lbs., Maximum Tilt: 15°, 30° & 45°, Operation: Manual – Bench Top Tilters – Heavy–duty steel Bench Top Tilters tilt loads from 0° to 45° (3" lip). Easily attached to most industrial table tops, work benches, and mobile lift tables of sufficient load capacity and surface size. Unit slides back as it tilts to maintain the center of gravity over the frame. Manual units need to be adjusted only when unloaded. Linear Actuated units are equipped with a push–button hand pendant control, located on an 8 foot cord. Flat base plate with slotted holes for installation.

Manufacturer: Vestil, Manufacturer Part Number: MPR-13-KITOptional Bridge Kit.

Manufacturer: Vestil, Manufacturer Part Number: BTT-6-46Platform Size: 28"W x 46"L x 2"H, Capacity: 600 lbs., Maximum Tilt: 15°, 30° & 45°, Operation: Manual – Bench Top Tilters – Heavy–duty steel Bench Top Tilters tilt loads from 0° to 45° (3" lip). Easily attached to most industrial table tops, work benches, and mobile lift tables of sufficient load capacity and surface size. Unit slides back as it tilts to maintain the center of gravity over the frame. Manual units need to be adjusted only when unloaded. Linear Actuated units are equipped with a push–button hand pendant control, located on an 8 foot cord. Flat base plate with slotted holes for installation.

Manufacturer: Vestil, Manufacturer Part Number: MPO-3The Multi-Function Package Opener quickly cuts strapping, film, rope, and tape. The heavy-duty retractable claw removes staples. MFG Part# MPO-3

Manufacturer: Vestil, Manufacturer Part Number: POS-3636-EHThe Posi-Crank ergonomic work station is an economical variable height worker positioner. With the use of electric hydraulic lifting system, the platform height may be adjusted to the optimum ergonomic level suitable for each operator. Benefits of the Posi-Crank include minimizing the risk of cumulative trauma injuries, back injuries and fatigue while maximizing efficiency and operator morale. The Posi-Crank incorporates the use of acme threaded rods for a simple yet effective height adjustment. A heavy duty chain is used in lieu of a belt to ensure a positive working height without risk of slippage. The unit is constructed of steel to provide years of service. MFG Part# POS-3636-EH

Manufacturer: Vestil, Manufacturer Part Number: POS-3672-EHThe Posi-Crank ergonomic work station is an economical variable height worker positioner. With the use of electric hydraulic lifting system, the platform height may be adjusted to the optimum ergonomic level suitable for each operator. Benefits of the Posi-Crank include minimizing the risk of cumulative trauma injuries, back injuries and fatigue while maximizing efficiency and operator morale. The Posi-Crank incorporates the use of acme threaded rods for a simple yet effective height adjustment. A heavy duty chain is used in lieu of a belt to ensure a positive working height without risk of slippage. The unit is constructed of steel to provide years of service. MFG Part# POS-3672-EH

Manufacturer: Vestil, Manufacturer Part Number: MPR-10-KITOptional Bridge Kit.

Manufacturer: Vestil, Manufacturer Part Number: POS-3672-EH-MATThe Posi-Crank ergonomic work station is an economical variable height worker positioner. With the use of electric hydraulic lifting system, the platform height may be adjusted to the optimum ergonomic level suitable for each operator. Benefits of the Posi-Crank include minimizing the risk of cumulative trauma injuries, back injuries and fatigue while maximizing efficiency and operator morale. The Posi-Crank incorporates the use of acme threaded rods for a simple yet effective height adjustment. A heavy duty chain is used in lieu of a belt to ensure a positive working height without risk of slippage. The unit is constructed of steel to provide years of service. MFG Part# POS-3672-EH-MAT

Manufacturer: Vestil, Manufacturer Part Number: POS-3648-EH-MATThe Posi-Crank ergonomic work station is an economical variable height worker positioner. With the use of electric hydraulic lifting system, the platform height may be adjusted to the optimum ergonomic level suitable for each operator. Benefits of the Posi-Crank include minimizing the risk of cumulative trauma injuries, back injuries and fatigue while maximizing efficiency and operator morale. The Posi-Crank incorporates the use of acme threaded rods for a simple yet effective height adjustment. A heavy duty chain is used in lieu of a belt to ensure a positive working height without risk of slippage. The unit is constructed of steel to provide years of service. MFG Part# POS-3648-EH-MAT

Manufacturer: Vestil, Manufacturer Part Number: POS-3648-EHThe Posi-Crank ergonomic work station is an economical variable height worker positioner. With the use of electric hydraulic lifting system, the platform height may be adjusted to the optimum ergonomic level suitable for each operator. Benefits of the Posi-Crank include minimizing the risk of cumulative trauma injuries, back injuries and fatigue while maximizing efficiency and operator morale. The Posi-Crank incorporates the use of acme threaded rods for a simple yet effective height adjustment. A heavy duty chain is used in lieu of a belt to ensure a positive working height without risk of slippage. The unit is constructed of steel to provide years of service. MFG Part# POS-3648-EH

Manufacturer: Vestil, Manufacturer Part Number: POS-3648-MATUniform Capacity (lbs.): 500, Platform Width (in.): 36, Platform Length (in.): 48, Lowered Height (in.): 3, Raised Height (in.): 19, Operation: Hand Crank – The Posi–Crank Worker Platform with mat can be adjusted to the optimum ergonomic level suitable for each operator with a simple turn of the crank. It incorporates the use of ACME threaded rods and a series of gears for simple yet effective height adjustment. The crank handle may be removed for maximizing the operating space. The deck is constructed of steel tread plate for better traction.

Manufacturer: Vestil, Manufacturer Part Number: POS-3636-EH-MATThe Posi-Crank ergonomic work station is an economical variable height worker positioner. With the use of electric hydraulic lifting system, the platform height may be adjusted to the optimum ergonomic level suitable for each operator. Benefits of the Posi-Crank include minimizing the risk of cumulative trauma injuries, back injuries and fatigue while maximizing efficiency and operator morale. The Posi-Crank incorporates the use of acme threaded rods for a simple yet effective height adjustment. A heavy duty chain is used in lieu of a belt to ensure a positive working height without risk of slippage. The unit is constructed of steel to provide years of service. MFG Part# POS-3636-EH-MAT

Manufacturer: Vestil, Manufacturer Part Number: WP-4848-84B-FFPlatform Size (W x L): 48" x 48", Fork Pocket Centers: 24", Expanded Metal Back: 84" – Front Door Entry – Work Platforms – Convenient fork truck work platforms quickly and safely transport maintenance personnel where they are needed. Attaches to fork truck by inserting forks into fork pockets and securing platform to fork truck. Tine lock must be engaged to secure platform to forks. 42" high handrail with 21" high mid–rail on three sides. 60" high expanded metal backing on fourth side (84" high backing to meet California OSHA specifications). Includes checker floor plate platform and 36" long strap with hook to attach platform to fork truck. The usable fork pockets are 7–3/4"W x 3–3/8"H in rear and 7–3/4"W x 1–7/8"H in front. Capacity is 1,000 pounds. Welded steel construction. Powder coat blue finish. The Full Featured units include an Emergency Stop Button Kit and Web Lanyard with Safety Harness.

Manufacturer: Vestil, Manufacturer Part Number: POS-3672-MATUniform Capacity (lbs.): 500, Platform Width (in.): 36, Platform Length (in.): 72, Lowered Height (in.): 3, Raised Height (in.): 19, Operation: Hand Crank – The Posi–Crank Worker Platform with mat can be adjusted to the optimum ergonomic level suitable for each operator with a simple turn of the crank. It incorporates the use of ACME threaded rods and a series of gears for simple yet effective height adjustment. The crank handle may be removed for maximizing the operating space. The deck is constructed of steel tread plate for better traction.

Manufacturer: Vestil, Manufacturer Part Number: WP-4848-DD-FFPlatform Size: 48"W x 48"L, Fork Pocket Centers: 16", Expanded Metal Back: 60" – Work Platform – Convenient fork truck work platforms quickly and safely transport maintenance personnel where they are needed. Attaches to fork truck by inserting forks into fork pockets and securing platform to fork truck. Tine lock must be engaged to secure platform to forks. 42" high handrail with 21" high mid–rail on three sides. 60" high expanded metal backing on fourth side (84" high backing to meet California OSHA specifications). Includes checker floor plate platform and 36" long strap with hook to attach platform to fork truck. The usable fork pockets are 7–3/4"W x 3–3/8"H in rear and 7–3/4"W x 1–7/8"H in front. Capacity is 1,000 pounds. Welded steel construction. Powder coat blue finish. Full Featured unit includes an Emergency Stop Button Kit and Web Lanyard with Safety Harness.

Manufacturer: Vestil, Manufacturer Part Number: WP-4848-84B-DD-FFPlatform Size (W x L): 48" x 48", Fork Pocket Centers: 24", Expanded Metal Back: 84" – Side Dual Door Entry – Work Platforms – Convenient fork truck work platforms quickly and safely transport maintenance personnel where they are needed. Attaches to fork truck by inserting forks into fork pockets and securing platform to fork truck. Tine lock must be engaged to secure platform to forks. 42" high handrail with 21" high mid–rail on three sides. 60" high expanded metal backing on fourth side (84" high backing to meet California OSHA specifications). Includes checker floor plate platform and 36" long strap with hook to attach platform to fork truck. The usable fork pockets are 7–3/4"W x 3–3/8"H in rear and 7–3/4"W x 1–7/8"H in front. Capacity is 1,000 pounds. Welded steel construction. Powder coat blue finish. The Full Featured units include an Emergency Stop Button Kit and Web Lanyard with Safety Harness.

Manufacturer: Vestil, Manufacturer Part Number: POS-3636-MATUniform Capacity (lbs.): 500, Platform Width (in.): 36, Platform Length (in.): 36, Lowered Height (in.): 3, Raised Height (in.): 19, Operation: Hand Crank – The Posi–Crank Worker Platform with mat can be adjusted to the optimum ergonomic level suitable for each operator with a simple turn of the crank. It incorporates the use of ACME threaded rods and a series of gears for simple yet effective height adjustment. The crank handle may be removed for maximizing the operating space. The deck is constructed of steel tread plate for better traction.

Manufacturer: Vestil, Manufacturer Part Number: POS-3672Platform Size (W x L): 36" x 72", Lowered Height: 3", Raised Height: 19", Capacity: 500 lbs., Operation: Hand Crank – Posi–Crank Worker Platforms – The Posi–Crank ergonomic work station is an economical variable height work positioner. With a simple turn of a crank, the platform height may be adjusted to the optimum ergonomic level suitable for each operator. Benefits of the Posi–Crank include minimizing the risk of cumulative trauma injuries, back injuries and fatigue, while maximizing efficiency and operator morale. The Posi–Crank incorporates the use of ACME threaded rods and a series of gears for simple yet effective height adjustment. The crank handle may be removed for maximizing the operating space. The deck is constructed of steel treadplate for strength and better traction.

Manufacturer: Vestil, Manufacturer Part Number: WP-3636-CA-84BThis convenient fork truck Work Platform quickly and safely raises maintenance personnel where they are needed. Attaches to fork truck by inserting forks into fork pockets and securing platform to fork truck. Tine lock must be engaged to secure platform to forks. Dual handrails on three (3) sides. Expanded metal backing on fourth side. Includes checker floor plate platform and long strap with hook to attach platform to fork truck. A maximum of two (2) people can be in the work platform at one time. Includes (4) four poly swivel casters. Meets California OSHA specifications.

Manufacturer: Vestil, Manufacturer Part Number: POS-3636Platform Size (W x L): 36" x 36", Lowered Height: 3", Raised Height: 19", Capacity: 500 lbs., Operation: Hand Crank – Posi–Crank Worker Platforms – The Posi–Crank ergonomic work station is an economical variable height work positioner. With a simple turn of a crank, the platform height may be adjusted to the optimum ergonomic level suitable for each operator. Benefits of the Posi–Crank include minimizing the risk of cumulative trauma injuries, back injuries and fatigue, while maximizing efficiency and operator morale. The Posi–Crank incorporates the use of ACME threaded rods and a series of gears for simple yet effective height adjustment. The crank handle may be removed for maximizing the operating space. The deck is constructed of steel treadplate for strength and better traction.

Manufacturer: Vestil, Manufacturer Part Number: MPR-2313-GThe Multi-Purpose Ramp is a high impact ramp that is perfect for a variety of work environments; postal routes, schools, hospitals, warehouses and delivery routes. This ramp makes it simple to move loads onto a curb or over hoses and cables. The textured non-skid surface allows for sure footing on the incline and decline. The lightweight and completely portable unit handles hand trucks and other wheeled equipment with ease. MFG Part# MPR-2310-G

Manufacturer: Vestil, Manufacturer Part Number: WP-4848-FFConvenient fork truck work platforms quickly and safely transport maintenance personnel where they are needed. Attaches to fork truck by inserting forks into fork pockets and securing platform to fork truck. Tine lock must be engaged to secure platform to forks. 42" high handrail with 21" high mid–rail on three sides. 60" high expanded metal backing on fourth side (84" high backing to meet California OSHA specifications). Includes checker floor plate platform and 36" long strap with hook to attach platform to fork truck. The usable fork pockets are 7–3/4"W x 3–3/8"H in rear and 7–3/4"W x 1–7/8"H in front. Capacity is 1,000 pounds. Welded steel construction. Powder coat blue finish. SPECIFICATIONSPlatform Size: 48"W x 48"L48" x 48" x 60" - 304 lbs.