Tables, Benches and Platforms

Manufacturer: Vestil, Manufacturer Part Number: EHLT-4848-12-43Platform Size (W x L): 48" x 48", Lowered Height: 10", Raised Height: 43", Capacity (Pounds): 12,000, – Electric Hydraulic Scissor Lift Table – Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities. Safety features include: electric toe guard to protect pinch points during lowering of the table, brass velocity fuse to maintain platform height regardless of hydraulic pressure, 24V AC push–button hand control, maintenance prop, and upper travel limit switch to stop table at maximum height, reducing motor wear. 2HP, Voltage and Phase required when ordering, 60 Hz totally enclosed motor standard, other voltages available. 3000 psi hydraulic component rating.

Manufacturer: Vestil, Manufacturer Part Number: EHLT-4848-1-43Platform Size (W x L): 48" x 48", Lowered Height: 7", Raised Height: 43", Capacity (Pounds): 1,000, – Electric Hydraulic Scissor Lift Table – Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities. Safety features include: electric toe guard to protect pinch points during lowering of the table, brass velocity fuse to maintain platform height regardless of hydraulic pressure, 24V AC push–button hand control, maintenance prop, and upper travel limit switch to stop table at maximum height, reducing motor wear. 2HP, Voltage and Phase required when ordering, 60 Hz totally enclosed motor standard, other voltages available. 3000 psi hydraulic component rating.

Manufacturer: Vestil, Manufacturer Part Number: CART-24-15-MCapacity: 1,500 lbs., Platform Size: 24W" x 48"L, Service Range: 9" to 42" – Manual Scissor Cart – Tables provide unparalleled ergonomic support in lifting, palletizing, loading, and unloading applications. Carts are raised or lowered with this manual two–step foot pump. Units roll smoothly with 2 rigid and 2 swivel 4" x 2" phenolic casters with brakes. Push handle is non–removable. Platform is equipped with perimeter pinch–point guard for OSHA compliance.

Manufacturer: Vestil, Manufacturer Part Number: EHLT-4872-2-43Capacity: 2,000 lbs., Lowered Height: 7", Raised Height: 43", Platform Size: 48"W x 72"L – Electric Hydraulic Scissor Lift Table – Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities. Safety features include: electric toe guard to protect pinch points during lowering of the table, brass velocity fuse to maintain platform height regardless of hydraulic pressure, 24V AC push–button hand control, maintenance prop, and upper travel limit switch to stop table at maximum height, reducing motor wear. 2HP, 460V, 3 phase, 60 Hz totally enclosed motor standard, other voltages available. 3000 psi hydraulic component rating.

Manufacturer: Vestil, Manufacturer Part Number: CART-24-10-MCapacity: 1,000 lbs., Platform Size: 24W" x 48"L, Service Range: 9" to 42" – Manual Scissor Cart – Tables provide unparalleled ergonomic support in lifting, palletizing, loading, and unloading applications. Carts are raised or lowered with this manual two–step foot pump. Units roll smoothly with 2 rigid and 2 swivel 4" x 2" phenolic casters with brakes. Push handle is non–removable. Platform is equipped with perimeter pinch–point guard for OSHA compliance.

Manufacturer: Vestil, Manufacturer Part Number: EHLT-2466-2-55Capacity: 2,000 lbs., Lowered Height: 7", Raised Height: 55", Platform Size: 24"W x 66"L – Electric Hydraulic Scissor Lift Table – Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities. Safety features include: electric toe guard to protect pinch points during lowering of the table, brass velocity fuse to maintain platform height regardless of hydraulic pressure, 24V AC push–button hand control, maintenance prop, and upper travel limit switch to stop table at maximum height, reducing motor wear. 2HP, 460V, 3 phase, 60 Hz totally enclosed motor standard, other voltages available. 3000 psi hydraulic component rating.

Manufacturer: Vestil, Manufacturer Part Number: EHLT-2448-2-43Capacity: 2,000 lbs., Lowered Height: 7", Raised Height: 43", Platform Size: 24"W x 48"L – Electric Hydraulic Scissor Lift Table – Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities. Safety features include: electric toe guard to protect pinch points during lowering of the table, brass velocity fuse to maintain platform height regardless of hydraulic pressure, 24V AC push–button hand control, maintenance prop, and upper travel limit switch to stop table at maximum height, reducing motor wear. 2HP, 460V, 3 phase, 60 Hz totally enclosed motor standard, other voltages available. 3000 psi hydraulic component rating.

Manufacturer: Vestil, Manufacturer Part Number: CART-24-15-DCCapacity: 1,500 lbs., Platform Size: 24"W x 48"L, Service Range: 9" to 42", Lift Speed: 17 sec. – DC Powered Cart – Internal DC powered electric motor and 12V battery is included. Electric motor is rated at 1600 watts. Built–in battery charger is included (operated on 115V AC power). Push buttons to raise and lower lift are located on the power unit. Hand control on coil cord is also standard. Key–operated ON/OFF control for better security is built into the power unit. Platform is equipped with perimeter pinch–point guard for OSHA compliance.

Manufacturer: Vestil, Manufacturer Part Number: CART-23-15-MCapacity: 1,500 lbs., Platform Size: 24W" x 36"L, Service Range: 11" to 32" – Manual Scissor Cart – Tables provide unparalleled ergonomic support in lifting, palletizing, loading, and unloading applications. Carts are raised or lowered with this manual two–step foot pump. Units roll smoothly with 2 rigid and 2 swivel 4"x2" phenolic casters with brakes. Push handle is non–removable. Platform is equipped with perimeter pinch–point guard for OSHA compliance.

Manufacturer: Vestil, Manufacturer Part Number: AHLT-4872-3-43Capacity: 3,000 lbs., Platform Size: 48"W x 72"L, Lowered Height: 7", Raised Height: 43" – Rotary Air/Hydraulic Scissor Lift Table – Utilize the Efficiency of factory air to power this lift table. Simply connect a " NPT air line, filter, regulator and lubricator and you now have the most efficient lift table manufactured. Features pneumatic upper travel limit switch, toe guards, internal brass velocity fuse, hinged maintenance prop, two button hand control and state–of–the–art precision pins and bearings.

Manufacturer: Vestil, Manufacturer Part Number: CART-23-10-DCCapacity: 1,000 lbs., Platform Size: 24"W x 36"L, Service Range: 11" to 32", Lift Speed: 14 sec. – DC Powered Cart – Internal DC powered electric motor and 12V battery is included. Electric motor is rated at 1600 watts. Built–in battery charger is included (operated on 115V AC power). Push buttons to raise and lower lift are located on the power unit. Hand control on coil cord is also standard. Key–operated ON/OFF control for better security is built into the power unit. Platform is equipped with perimeter pinch–point guard for OSHA compliance.

Manufacturer: Vestil, Manufacturer Part Number: AHLT-4048-3-43Capacity: 3,000 lbs., Platform Size: 40"W x 48"L, Lowered Height: 7", Raised Height: 43" – Rotary Air/Hydraulic Scissor Lift Table – Utilize the Efficiency of factory air to power this lift table. Simply connect a " NPT air line, filter, regulator and lubricator and you now have the most efficient lift table manufactured. Features pneumatic upper travel limit switch, toe guards, internal brass velocity fuse, hinged maintenance prop, two button hand control and state–of–the–art precision pins and bearings.

Manufacturer: Vestil, Manufacturer Part Number: CART-24-10-DCThe DC Powered Scissor Cart table provides an unparalleled support in lifting, palletizing, loading, and unloading applications. The cart is raised or lowered with a DC powered motor. The unit rolls smoothly on two rigid and two swivel phenolic casters with brakes. The internal DC powered electric motor and battery is included on DC units. The built-in battery charger is AC powered and is included. Push buttons to raise and lower lift are located on a hand control with a coil cord, which is standard. The platform is equipped with perimeter pinch-point guard for OSHA compliance. The push handle is removable. Features an internal safety velocity fuse in each cylinder.

Manufacturer: Vestil, Manufacturer Part Number: CART-23-10-MCapacity: 1,000 lbs., Platform Size: 24W" x 36"L, Service Range: 11" to 32" – Manual Scissor Cart – Tables provide unparalleled ergonomic support in lifting, palletizing, loading, and unloading applications. Carts are raised or lowered with this manual two–step foot pump. Units roll smoothly with 2 rigid and 2 swivel 4"x2" phenolic casters with brakes. Push handle is non–removable. Platform is equipped with perimeter pinch–point guard for OSHA compliance.

Manufacturer: Vestil, Manufacturer Part Number: AHLT-4848-3-43Capacity: 3,000 lbs., Platform Size: 48"W x 48"L, Lowered Height: 7", Raised Height: 43" – Rotary Air/Hydraulic Scissor Lift Table – Utilize the Efficiency of factory air to power this lift table. Simply connect a " NPT air line, filter, regulator and lubricator and you now have the most efficient lift table manufactured. Features pneumatic upper travel limit switch, toe guards, internal brass velocity fuse, hinged maintenance prop, two button hand control and state–of–the–art precision pins and bearings.

Manufacturer: Vestil, Manufacturer Part Number: EHLT-4872-4-43The Electric Hydraulic Scissor Lift Table is used by all types of manufacturing and warehouse facilities. Safety features include: patented pinch point perimeter toe guard to protect pinch points while lowering of the table, fused push button control, internal safety velocity fuse to maintain platform height in an event of hose or fitting failure, integral maintenance prop, adjustable upper travel limit switch to stop table at maximum height, and a displacement-style hydraulic cylinders for maximum strength. It also features a pressure plated pump, manifold system, displacement style hydraulic cylinder, and a state-of-the-art lifetime lubricated bearings. The standard 56 frame electric motor is a fully enclosed with optional voltages available. Contact factory if platform dimensions are crucial.

Manufacturer: Vestil, Manufacturer Part Number: AHLT-3060-3-43Capacity: 3,000 lbs., Platform Size: 30"W x 60"L, Lowered Height: 7", Raised Height: 43" – Rotary Air/Hydraulic Scissor Lift Table – Utilize the Efficiency of factory air to power this lift table. Simply connect a " NPT air line, filter, regulator and lubricator and you now have the most efficient lift table manufactured. Features pneumatic upper travel limit switch, toe guards, internal brass velocity fuse, hinged maintenance prop, two button hand control and state–of–the–art precision pins and bearings.

Manufacturer: Vestil, Manufacturer Part Number: SCSC-1000-4242The Auto–Hite Cart raises or lowers as materials are removed or added to the platform, keeping material at an ergonomic work height. Increase efficiency while reducing potentially harmful bending and twisting motions. Carts utilize tension springs which can be adjusted in order to fit each particular application. All steel construction with removable bolt–on handle. Polyurethane casters are 5" x 2", (2) rigid and (2) swivel with brake. Overall height is 38".SPECIFICATIONS1,000 lbs Capacity45" x 42" x 38" - 368 lbs.

Manufacturer: Vestil, Manufacturer Part Number: SCSC-500-2040The Auto–Hite Cart raises or lowers as materials are removed or added to the platform, keeping material at an ergonomic work height. Increase efficiency while reducing potentially harmful bending and twisting motions. Carts utilize tension springs which can be adjusted in order to fit each particular application. All steel construction with removable bolt–on handle. Polyurethane casters are 5" x 2", (2) rigid and (2) swivel with brake. Overall height is 38".SPECIFICATIONS500 lbs Capacity45" x 20" x 38" - 359 lbs.

Manufacturer: Vestil, Manufacturer Part Number: EHLT-4848-4-43The Electric Hydraulic Scissor Lift Table is used by all types of manufacturing and warehouse facilities. Safety features include: patented pinch point perimeter toe guard to protect pinch points while lowering of the table, fused push button control, internal safety velocity fuse to maintain platform height in an event of hose or fitting failure, integral maintenance prop, adjustable upper travel limit switch to stop table at maximum height, and a displacement-style hydraulic cylinders for maximum strength. It also features a pressure plated pump, manifold system, displacement style hydraulic cylinder, and a state-of-the-art lifetime lubricated bearings. The standard 56 frame electric motor is a fully enclosed with optional voltages available. Contact factory if platform dimensions are crucial.

Manufacturer: Vestil, Manufacturer Part Number: EHLT-4048-3-43Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities. Safety features include: electric toe guard to protect pinch points during lowering of the table, brass velocity fuse to maintain platform height regardless of hydraulic pressure, 24V AC push–button hand control, maintenance prop, and upper travel limit switch to stop table at maximum height, reducing motor wear. 2HP, 460V, 3 phase, 60 Hz totally enclosed motor standard, other voltages available. 3000 psi hydraulic component rating. SPECIFICATIONSService Range 7" to 43", Platform Size: 40"Wx 48"L3,000 lbs Capacity48" x 40" x 43" - 800 lbs.

Manufacturer: Vestil, Manufacturer Part Number: EHLT-4848-3-43The Electric Hydraulic Scissor Lift Table is used by all types of manufacturing and warehouse facilities. Safety features include: patented pinch point perimeter toe guard to protect pinch points while lowering of the table, fused push button control, internal safety velocity fuse to maintain platform height in an event of hose or fitting failure, integral maintenance prop, adjustable upper travel limit switch to stop table at maximum height, and a displacement-style hydraulic cylinders for maximum strength. It also features a pressure plated pump, manifold system, displacement style hydraulic cylinder, and a state-of-the-art lifetime lubricated bearings. The standard 56 frame electric motor is a fully enclosed with optional voltages available. Contact factory if platform dimensions are crucial.

Manufacturer: Pucel, Manufacturer Part Number: HLTT-36-1Designed for moving dies & tools to and from work areas. The foot pedal easily adjusts the table height. Heavy, reinforced steel top. Floor lock holds the table firmly in place. Range: 31" to 43". Dimensions: 20"W x 36"L x 31"H. 1,000–lbs capacity.

Manufacturer: Vestil, Manufacturer Part Number: EHLT-3060-4-43Full featured electric hydraulic scissor lift tables are used by all types of manufacturing and warehouse facilities. Safety features include: electric toe guard to protect pinch points during lowering of the table, brass velocity fuse to maintain platform height regardless of hydraulic pressure, 24V AC push–button hand control, maintenance prop, and upper travel limit switch to stop table at maximum height, reducing motor wear. 2HP, 460V, 3 phase, 60 Hz totally enclosed motor standard, other voltages available. 3000 psi hydraulic component rating. SPECIFICATIONSService Range 7" to 43", Platform Size: 30"Wx 60"L4,000 lbs Capacity60" x 30" x 43" - 800 lbs.