Spill Containment Decks and Pallets

Manufacturer: Pucel, Manufacturer Part Number: DS-4Holds four drums in readily accessible positions. Designed for loading ease from front or back. Can be moved with fork lift fully loaded. Pads on the bottom legs protect floors. The dimensions are 60" x 36" x 48.".

Manufacturer: Pucel, Manufacturer Part Number: DS-6Holds six drums in readily accessible positions. Designed for loading ease from front or back. Can be moved with fork lift fully loaded. Pads on the bottom legs protect floors. The dimensions are 84" x 36" x 48.".

Manufacturer: Pucel, Manufacturer Part Number: VDU-10Each unit stacks two drums horizontally. Maximum number of units to be stacked vertically is four. There is a four–way access by fork trucks. The dimensions are 44.25" x 30" x 13" with a capacity of 1,500–lbs.

Manufacturer: Pucel, Manufacturer Part Number: 85Theses racks hold four drums in readily accessible positions. Designed for loading ease with whatever equipment you may now have. Dimensions: 60"W x 30"D x 54"H, 2,500–lbs Capacity.

Manufacturer: Pucel, Manufacturer Part Number: 85C-PUCELTheses racks hold four drums in readily accessible positions. Designed for loading ease with whatever equipment you may now have. If your hoist does not travel over rack, this can be moved under your hoist. Dimensions: 60"W x 30"D x 54"H, 2,500–lbs Capacity.

Manufacturer: Little Giant, Manufacturer Part Number: SS-RD-5149-42Designed to fit with your existing pallet racks, this spill control platform installs quickly and will contain liquids from dripping below. Top grating is 51" deep x 49" wide with two sump sizes to fit either 42" or 48" deep pallet racks. Both sizes have a 66 gallon sump capacity to help you comply with EPA regulations.

Manufacturer: Little Giant, Manufacturer Part Number: SS-RD-5149-48Designed to fit with your existing pallet racks, this spill control platform installs quickly and will contain liquids from dripping below. Top grating is 51" deep x 49" wide with two sump sizes to fit either 42" or 48" deep pallet racks. Both sizes have a 66 gallon sump capacity to help you comply with EPA regulations.

Manufacturer: Denios, Manufacturer Part Number: K17-1941Aluminum Ramp adjusts from 9” to 11” in height. Heavy–duty construction provides added safety for industrial use. Works great with our steel pallets and sumps. SPECIFICATIONSLoad Bearing Cap. - 1,000 lbs.1 ramp60"L x 30"W x 11"H, 110 lbs.

Manufacturer: UltraTech, Manufacturer Part Number: 1359Replacement Bladder for Ultra–Spill Deck Flexible Model Bladder Systems

Manufacturer: Justrite, Manufacturer Part Number: 28259This is GRATING for PALLETS AND ACCUMULATION CENTERS.

Manufacturer: Enpac, Manufacturer Part Number: SC-2077-DR01This tough, indoor or outdoor performer can take everything the elements throw at it to protect two 55-gallon drums while containing leaks with a 149-gallon maximum sump capacity. Drum access and removal is easy with our unique, gull-wing covers. Item inside is protected from the weather with our unique slide-over lid design. Security locks are included to secure the covers and contents. 100% polyethylene has excellent resistance to chemicals as well as weather. And you don't need to open the lids to see if there's been a leak. Liquids are easily viewed through the translucent sidewalls. The Poly-Safetypack is easily handled by forklift or pallet jack from two sides. Optional drain hole with plug available. Poly-Safetypack Plus has an increased interior depth allowing the lids to be closed with drum pumps in place. Also has an increased 270-gallon maximum sump capacity. This unit comes with drain.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Enpac, Manufacturer Part Number: SC-2038-DR01This tough, indoor or outdoor performer can take everything the elements throw at it to protect two 55-gallon drums while containing leaks with a 149-gallon maximum sump capacity. Drum access and removal is easy with our unique, gull-wing covers. Item inside is protected from the weather with our unique slide-over lid design. Security locks are included to secure the covers and contents. 100% polyethylene has excellent resistance to chemicals as well as weather. And you don't need to open the lids to see if there's been a leak. Liquids are easily viewed through the translucent sidewalls. The Poly-Safetypack is easily handled by forklift or pallet jack from two sides. Optional drain hole is included with this unit.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Eagle, Manufacturer Part Number: 1606Single Drum Poly Stacker

Manufacturer: Enpac, Manufacturer Part Number: SC-6006-0001The most efficient barrel dispensing systems you can buy! Let us introduce to you, our Single Poly–Racker and Single Poly–Stacker. If you love the features of our original Poly–Rack System but have limited floor space, then our Single Poly–Rack System is your answer. Combine a Single Poly–Racker with its Poly–Stacker for the most efficient drum storage and dispensing system you can buy. The Single Poly–Rack System provides you with easy and convenient storage, dispensing and spill containment for one or two 55–gallon drums. Increase safety and productivity when you add Poly–Shelf to your Poly–Rack System. It easily attaches to the Poly–Stacker and allows simultaneous dispensing from Stacker and Rack drums. Spills from the Shelf and Stackers drain into the dispensing well in the Rack.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.SPECIFICATIONS1,600 lbs. Load Bearing Capacity, 66 gal. Sump Capacity - 95 lbs.1 racker53" L x 31" W x 32" H

Manufacturer: Enpac, Manufacturer Part Number: SC-6007-0001The most efficient barrel dispensing systems you can buy! Let us introduce to you, our Single Poly–Racker and Single Poly–Stacker. If you love the features of our original Poly–Rack System but have limited floor space, then our Single Poly–Rack System is your answer. Combine a Single Poly–Racker with its Poly–Stacker for the most efficient drum storage and dispensing system you can buy. The Single Poly–Rack System provides you with easy and convenient storage, dispensing and spill containment for one or two 55–gallon drums. Increase safety and productivity when you add Poly–Shelf to your Poly–Rack System. It easily attaches to the Poly–Stacker and allows simultaneous dispensing from Stacker and Rack drums. Spills from the Shelf and Stackers drain into the dispensing well in the Rack.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.SPECIFICATIONS800 lbs. Load Bearing Capacity - 50 lbs.1 stacker41" L x 31" W x 21" H

Manufacturer: UltraTech, Manufacturer Part Number: 1040Spill Collector, Flat Bottom Model, No Drain: Mobile Secondary Container Provides Maximum Protection For The Inner Drum – Model without Drain. Applications include satellite waste collection, general storage of chemical drums and portable drum pumping stations. Rugged design allows Flat Bottom Model and Pallet Jack Model to be safely handled by forklift under top flange. 66 gallon containment capacity. 37 x 26.5 x 4.25. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 1043Spill Collector, Flat Bottom Model, With Drain: Mobile Secondary Container Provides Maximum Protection For The Inner Drum – Model without Drain. Applications include satellite waste collection, general storage of chemical drums and portable drum pumping stations. Rugged design allows Flat Bottom Model and Pallet Jack Model to be safely handled by forklift under top flange. 66 gallon containment capacity. 104 x 25.875 x 5.75. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 1041Spill Collector, Pallet Jack Model, No Drain: Mobile Secondary Container Provides Maximum Protection For The Inner Drum – Model without Drain. Applications include satellite waste collection, general storage of chemical drums and portable drum pumping stations. Rugged design allows Flat Bottom Model and Pallet Jack Model to be safely handled by forklift under top flange. 66 gallon containment capacity. 77.875 x 25.875 x 5.75. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 1044Spill Collector, Pallet Jack Model, With Drain: Mobile Secondary Container Provides Maximum Protection For The Inner Drum – Model without Drain. Applications include satellite waste collection, general storage of chemical drums and portable drum pumping stations. Rugged design allows Flat Bottom Model and Pallet Jack Model to be safely handled by forklift under top flange. 66 gallon containment capacity. 23.5 x 44 x 2.75. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Little Giant, Manufacturer Part Number: SSF-2045Gain an extra measure of spill control for your safety cabinets. Constructed from heavy-duty, 12 gauge steel this all-welded sump measures 20" deep x 45" wide x 6" high. Designed to accept most 18" D x 43" W safety cabinets, the platform will contain up to 25 gallons securely and keep any leakages off your floor. Your cabinet sits recessed in the platform by 1" which will allow the cabinet doors to fully open. The low profile design and steel braces in back ensure easy loading of your empty cabinet. Durable gray powder coated finish.

Manufacturer: UltraTech, Manufacturer Part Number: 2317Spill Deck – Bladder Attachment – Fits P1, P2 and P4 Spill Decks: Large, catastrophic leaks flow into the bladder through a bulkhead fitting. Protective "trap door" opens automatically to allow bladder to unfurl. Fits UltraTech Mfr Part No.: 1320, 2329, 2330. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 2221Spill Deck – Sidewall Plug.

Manufacturer: UltraTech, Manufacturer Part Number: 1360Low Profile, Low Cost Spill Containment Helps Meet Regulations — Takes Up Minimal Storage/Shipping Space Functions like other spill decks / platforms but disassembles into smaller components when not in use – saves valuable storage space and shipping costs. Outer yellow sump is constructed of heavy–duty, 18.5 oz. PVC material – folds/ rolls down easily for convenient storage. Decks can be connected with optional Bulkhead Fittings to create a custom spill containment area. Incidental spill and leaks are contained within the sump. In the case of a catastrophic spill, the bladder (included with Spill Deck Bladder System Model) will automatically deploy providing an additional 66 gallons of capacity. Polyethylene grating is easily removed for quick clean–up. Quick and easy to assemble. Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175, and UFC Spill Containment Regulations.

Manufacturer: UltraTech, Manufacturer Part Number: 1361Low Profile, Low Cost Spill Containment Helps Meet Regulations — Takes Up Minimal Storage/Shipping Space Functions like other spill decks / platforms but disassembles into smaller components when not in use – saves valuable storage space and shipping costs. Outer yellow sump is constructed of heavy–duty, 18.5 oz. PVC material – folds/ rolls down easily for convenient storage. Decks can be connected with optional Bulkhead Fittings to create a custom spill containment area. Incidental spill and leaks are contained within the sump. In the case of a catastrophic spill, the bladder (included with Spill Deck Bladder System Model) will automatically deploy providing an additional 66 gallons of capacity. Polyethylene grating is easily removed for quick clean–up. Quick and easy to assemble. Meets SPCC, EPA Container Storage Regulation 40 CFR 264.175, and UFC Spill Containment Regulations.