Ramps and Dock Plates

Manufacturer: Vestil, Manufacturer Part Number: BTA-06005430Uniform Capacity (lbs.): 6000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–3/4, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: SEH-4836Capacity: 7,300 lbs., Overall Width: 48", Overall Length: 36", Height Differential: 5", Plate Thickness: 1/2" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SEH-4830Capacity: 8,800 lbs., Overall Width: 48", Overall Length: 30", Height Differential: 4", Plate Thickness: 1/2" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SE-7236Capacity: 6,430 lbs., Overall Width: 72", Overall Length: 36", Height Differential: 5", Plate Thickness: 3/8" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SE-6036Capacity: 5,150 lbs., Overall Width: 60", Overall Length: 36", Height Differential: 5", Plate Thickness: 3/8" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SE-4830Capacity: 5,000 lbs., Overall Width: 48", Overall Length: 30", Height Differential: 4", Plate Thickness: 3/8" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SE-4836Capacity: 4,125 lbs., Overall Width: 48", Overall Length: 36", Height Differential: 5", Plate Thickness: 3/8" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: EH-6024Capacity: 10,000 lbs., Plate Thickness: ", Width: 60", Length: 24", Height Differential: 3" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: EH-3030Capacity: 4,100 lbs., Plate Thickness: ", Width: 30", Length: 30", Height Differential: 4" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: EH-4824Capacity: 8,200 lbs., Plate Thickness: ", Width: 48", Length: 24", Height Differential: 3" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: EH-3624Capacity: 6,200 lbs., Plate Thickness: ", Width: 36", Length: 24", Height Differential: 3" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: EH-3630Capacity: 5,100 lbs., Plate Thickness: ", Width: 36", Length: 30", Height Differential: 4" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-6024Capacity: 5,700 lbs., Width: 60", Length: 24", Height Difference: 3", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-3648Capacity: 1,900 lbs., Width: 36", Length: 48", Height Difference: 7", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-4830Capacity: 4,100 lbs., Width: 48", Length: 30", Height Difference: 4", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-3630Capacity: 3,000 lbs., Width: 36", Length: 30", Height Difference: 4", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-4848Capacity: 2,600 lbs., Width: 48", Length: 48", Height Difference: 7", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: AHTD-3648Overall Size: 36"W x 48"L, 7" Height Differential, Capacity: 800 Lbs. – Aluminum Hand Truck Dockboards – These dockboards are lightweight and can be carried and positioned by one person. Provides a safe and convenient bridge between dock and truck. Welded aluminum diamond tread surface and beveled edges provide safe and smooth entry and exit. The bend is designed to keep ramp edges flush with dock surface and truck floor. Equipped with bolted locking legs. Full length aluminum curbs provide hand holds and reduce chance of roll off. Designed for use with two wheel hand trucks. 3/16" plate thickness. Manufactured in compliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: E-4824Capacity: 5,200 lbs., Width: 48", Length: 24", Height Difference: 3", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-4836Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.SPECIFICATIONS3,500 lbs Capacity36" x 48" x 9.5" - 83 lbs.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05006030Size (W x L): 60" x 30", Ht. Difference (8°/17%): 3", Ht. Difference (11°/19%): 4", Capacity: 5,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: AHTD-3048Overall Size: 30"W x 48"L, 7" Height Differential, Capacity: 800 Lbs. – Aluminum Hand Truck Dockboards – These dockboards are lightweight and can be carried and positioned by one person. Provides a safe and convenient bridge between dock and truck. Welded aluminum diamond tread surface and beveled edges provide safe and smooth entry and exit. The bend is designed to keep ramp edges flush with dock surface and truck floor. Equipped with bolted locking legs. Full length aluminum curbs provide hand holds and reduce chance of roll off. Designed for use with two wheel hand trucks. 3/16" plate thickness. Manufactured in compliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: AHTD-3036Overall Size: 30"W x 36"L, 5" Height Differential, Capacity: 800 Lbs. – Aluminum Hand Truck Dockboards – These dockboards are lightweight and can be carried and positioned by one person. Provides a safe and convenient bridge between dock and truck. Welded aluminum diamond tread surface and beveled edges provide safe and smooth entry and exit. The bend is designed to keep ramp edges flush with dock surface and truck floor. Equipped with bolted locking legs. Full length aluminum curbs provide hand holds and reduce chance of roll off. Designed for use with two wheel hand trucks. 3/16" plate thickness. Manufactured in compliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: AH-3648Capacity: 700 lbs., Dimensions: 36"W x 48"L x 7"H, Plate Thickness: 5/16" – Aluminum Hand Truck Dockplate – Designed for use with two wheel hand trucks. A convenient, safe and easy way to access loading docks from trucks. Lightweight and easily transported by just one person. Treadplate surface ensures skid–resistant safe traction. Locking legs secure the plate for safe loading and unloading. Complete with bolt–on zinc plated carrying handles and locking legs.