Ramps and Dock Plates

Manufacturer: Vestil, Manufacturer Part Number: TAS-10-7272Capacity: 10,000 lbs., Overall Size: 72"W x 72"L, Height Difference: 12" – Aluminum Truck Dockboards with Steel Safety Curbs – This dockboard is designed for portability and safety. Deck is made of tough high strength aluminum treadplate. Safety curbs are painted yellow and are constructed of structural steel with cast tapered ends. Steel legs are bolted for increased durability. Canted locking legs for easier fork truck portability. Manufactured in compliance of OSHA.

Manufacturer: Vestil, Manufacturer Part Number: TAS-15-6060Capacity: 15,000 lbs., Overall Size: 60"W x 60"L, Height Difference: 10" – Aluminum Truck Dockboards with Steel Safety Curbs – This dockboard is designed for portability and safety. Deck is made of tough high strength aluminum treadplate. Safety curbs are painted yellow and are constructed of structural steel with cast tapered ends. Steel legs are bolted for increased durability. Canted locking legs for easier fork truck portability. Manufactured in compliance of OSHA.

Manufacturer: Vestil, Manufacturer Part Number: TAS-10-7260Capacity: 10,000 lbs., Overall Size: 72"W x 60"L, Height Difference: 10" – Aluminum Truck Dockboards with Steel Safety Curbs – This dockboard is designed for portability and safety. Deck is made of tough high strength aluminum treadplate. Safety curbs are painted yellow and are constructed of structural steel with cast tapered ends. Steel legs are bolted for increased durability. Canted locking legs for easier fork truck portability. Manufactured in compliance of OSHA.

Manufacturer: Vestil, Manufacturer Part Number: TAS-10-7236Capacity: 10,000 lbs., Overall Size: 72"W x 36"L, Height Difference: 5" – Aluminum Truck Dockboards with Steel Safety Curbs – This dockboard is designed for portability and safety. Deck is made of tough high strength aluminum treadplate. Safety curbs are painted yellow and are constructed of structural steel with cast tapered ends. Steel legs are bolted for increased durability. Canted locking legs for easier fork truck portability. Manufactured in compliance of OSHA.

Manufacturer: Vestil, Manufacturer Part Number: SEH-6048Capacity: 6,875 lbs., Overall Width: 60", Overall Length: 48", Height Differential: 7", Plate Thickness: 1/2" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: RR-610-25Capacity: 25,000 lbs., Overall Size w/ Lip: 6'W x 10'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: SEH-4860Capacity: 4,400 lbs., Overall Width: 48", Overall Length: 60", Height Differential: 9", Plate Thickness: 1/2" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: RR-66-25Capacity: 25,000 lbs., Overall Size w/ Lip: 6'W x 6'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-76-25Capacity: 25,000 lbs., Overall Size w/ Lip: 7'W x 6'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-78-25Capacity: 25,000 lbs., Overall Size w/ Lip: 7'W x 8'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-710-25Capacity: 25,000 lbs., Overall Size w/ Lip: 7'W x 10'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: PE-2072Capacity: 20,000 lbs., Operation: Electric, Usable Width: 72" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Edge–O–Dock is easy to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a 3/4 HP, 110/220 Volt, single phase motor prewired to 110 V. Unit comes complete with motor, pump, control box, cylinder, lines and oil.

Manufacturer: Vestil, Manufacturer Part Number: RR-68-25Capacity: 25,000 lbs., Overall Size w/ Lip: 6'W x 8'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: PP-2066Capacity: 20,000 lbs., Operation: Hand Pump, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall–mount brackets, cylinder, 15 feet hydraulic line and oil.

Manufacturer: Vestil, Manufacturer Part Number: PP-2572Capacity: 25,000 lbs., Operation: Hand Pump, Usable Width: 72" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall–mount brackets, cylinder, 15 feet hydraulic line and oil.

Manufacturer: Vestil, Manufacturer Part Number: PP-3066Capacity: 30,000 lbs., Operation: Hand Pump, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall–mount brackets, cylinder, 15 feet hydraulic line and oil.

Manufacturer: Vestil, Manufacturer Part Number: PP-3072Capacity: 30,000 lbs., Operation: Hand Pump, Usable Width: 72" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall–mount brackets, cylinder, 15 feet hydraulic line and oil.

Manufacturer: Vestil, Manufacturer Part Number: PP-2566Capacity: 25,000 lbs., Operation: Hand Pump, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall–mount brackets, cylinder, 15 feet hydraulic line and oil.

Manufacturer: Vestil, Manufacturer Part Number: PE-2572-36Capacity: 25,000 lbs., Operation: Electric, Usable Width: 72" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Ramping length is 36". A steel dock edge is required for proper installation. Edge–O–Dock is easy to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a 3/4 HP, 110/220 Volt, single phase motor prewired to 110 V. Unit comes complete with motor, pump, control box, cylinder, lines and oil.

Manufacturer: Vestil, Manufacturer Part Number: PP-2072Capacity: 20,000 lbs., Operation: Hand Pump, Usable Width: 72" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall–mount brackets, cylinder, 15 feet hydraulic line and oil.

Manufacturer: Vestil, Manufacturer Part Number: PP-2572-36Capacity: 25,000 lbs., Operation: Hand Pump, Usable Width: 72" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Ramping length 36". A steel dock edge is required for proper installation. Used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall–mount brackets, cylinder, 15 feet hydraulic line and oil.

Manufacturer: Vestil, Manufacturer Part Number: PP-1572-36Capacity: 15,000 lbs., Operation: Hand Pump, Usable Width: 72" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Ramping length 36". A steel dock edge is required for proper installation. Used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall–mount brackets, cylinder, 15 feet hydraulic line and oil.

Manufacturer: Vestil, Manufacturer Part Number: PE-3066Capacity: 30,000 lbs., Operation: Electric, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Edge–O–Dock is easy to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a 3/4 HP, 110/220 Volt, single phase motor prewired to 110 V. Unit comes complete with motor, pump, control box, cylinder, lines and oil.

Manufacturer: Vestil, Manufacturer Part Number: PE-2066Capacity: 20,000 lbs., Operation: Electric, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Edge–O–Dock is easy to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a 3/4 HP, 110/220 Volt, single phase motor prewired to 110 V. Unit comes complete with motor, pump, control box, cylinder, lines and oil.