
UltraTech
9' TrackPan System with Grates and Covers
$4,725.64
Manufacturer: UltraTech, Manufacturer Part Number: 9596Capture Hazardous Spills From Railroad Tanker Cars. Complete 9' TrackPan Systems are available for your convenience. Simply position your railcar with its bottom outlet valves over top of the TrackPans. Small spills, up to 112 gallons, are captured and kept out of the environment. Connect below–grade piping to channel large spills to holding tanks or lined ponds. System includes 2 center pans, 2 center grates, 2 center covers, 4 side pans, 4 side grates, 4 side covers and all necessary fittings, plugs, treated lumber and gaskets.SPECIFICATIONS112 gal. Sump Capacity544 lbs.Complete 9' System

UltraTech
9' TrackPan System, No Covers
$3,238.53
Manufacturer: UltraTech, Manufacturer Part Number: 9595Capture Hazardous Spills From Railroad Tanker Cars. Complete 9' TrackPan Systems are available for your convenience. Simply position your railcar with its bottom outlet valves over top of the TrackPans. Small spills, up to 112 gallons, are captured and kept out of the environment. Connect below–grade piping to channel large spills to holding tanks or lined ponds. System includes 2 center pans, 2 center grates, 4 side pans, 4 side grates and all necessary fittings, plugs, treated lumber and gaskets.SPECIFICATIONS112 gal. Sump Capacity452 lbs.Complete 9' System

UltraTech
Center Track Pan w/Grates
$806.87
Manufacturer: UltraTech, Manufacturer Part Number: 9566Capture Hazardous Spills From Railroad Tanker Cars. Ultra–TrackPans have been designed to provide spill containment at railroad sidings and locomotive maintenance facilities. Available in virtually any length, Ultra–TrackPans may be used to collect incidental spills and drips OR to capture and channel off significant spills caused by defective equipment or a major overflow. Center Track Pans fit between the rails while Side Track Pans fit on either side of the rails, providing complete spill coverage and containment. All pans are connected "end to end" with bulkhead fittings, allowing spills to flow from one pan to the next. Containment capacity is increased as the spill travels from TrackPan to TrackPan. Unlike carbon steel track pans, Ultra–TrackPans will not rust or corrode. Their polyethylene construction features a UV inhibitor that resists the degrading effects of the sun. These lightweight TrackPans can be easily installed without heavy lifting equipment. Minimal tools and labor are required. Track Pan Grates allow spills to flow below to the Track Pans while providing a level surface for walking or performing maintenance and repairs. Track Pan Covers are designed to work with the Track Pan Grates to shelter the Track Pans from rain and other elements. The Polyethylene Covers are left in place until the railcar(s) arrive to be off–loaded or loaded. Lightweight covers mechanically lock into the polyethylene grates and will not blow off in windy conditions. Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.
Prevent Costly Cleanup and Regulatory Fines Modular Design – Center and Side Pans are 53" long; containment areas can be conveniently assembled to any length desired
All–Polyethylene Construction – Rugged TrackPans withstand harsh chemicals and are designed to function in temperatures ranging from –40°F to +140°F
Economical and easy to install
Meets New York State Chemical Bulk Storage Regulation Section 599.17C – Secondary Containment for Transfer Stations
SPECIFICATIONS18 gal. Sump Capacity - 106 lbs.1 center track pan, 2 bulkhead fittings, 2 pieces treated lumber, 4 gaskets, 2 grates53.5" L x 53.5" W x 6" H

UltraTech
Cover for Center Track Pan
$405.07
Manufacturer: UltraTech, Manufacturer Part Number: 9580Capture Hazardous Spills From Railroad Tanker Cars. Ultra–TrackPans have been designed to provide spill containment at railroad sidings and locomotive maintenance facilities. Available in virtually any length, Ultra–TrackPans may be used to collect incidental spills and drips OR to capture and channel off significant spills caused by defective equipment or a major overflow. Center Track Pans fit between the rails while Side Track Pans fit on either side of the rails, providing complete spill coverage and containment. All pans are connected "end to end" with bulkhead fittings, allowing spills to flow from one pan to the next. Containment capacity is increased as the spill travels from TrackPan to TrackPan. Unlike carbon steel track pans, Ultra–TrackPans will not rust or corrode. Their polyethylene construction features a UV inhibitor that resists the degrading effects of the sun. These lightweight TrackPans can be easily installed without heavy lifting equipment. Minimal tools and labor are required. Track Pan Grates allow spills to flow below to the Track Pans while providing a level surface for walking or performing maintenance and repairs. Track Pan Covers are designed to work with the Track Pan Grates to shelter the Track Pans from rain and other elements. The Polyethylene Covers are left in place until the railcar(s) arrive to be off–loaded or loaded. Lightweight covers mechanically lock into the polyethylene grates and will not blow off in windy conditions. Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.
Prevent Costly Cleanup and Regulatory Fines Modular Design – Center and Side Pans are 53" long; containment areas can be conveniently assembled to any length desired
All–Polyethylene Construction – Rugged TrackPans withstand harsh chemicals and are designed to function in temperatures ranging from –40°F to +140°F
Economical and easy to install
Meets New York State Chemical Bulk Storage Regulation Section 599.17C – Secondary Containment for Transfer Stations
SPECIFICATIONSCan be used only on Center Track Pans w/Grates - 24 lbs.1 cover for center track pan56" L x 54" W

UltraTech
Cover for Side Track Pan
$210.36
Manufacturer: UltraTech, Manufacturer Part Number: 9581Capture Hazardous Spills From Railroad Tanker Cars. Ultra–TrackPans have been designed to provide spill containment at railroad sidings and locomotive maintenance facilities. Available in virtually any length, Ultra–TrackPans may be used to collect incidental spills and drips OR to capture and channel off significant spills caused by defective equipment or a major overflow. Center Track Pans fit between the rails while Side Track Pans fit on either side of the rails, providing complete spill coverage and containment. All pans are connected "end to end" with bulkhead fittings, allowing spills to flow from one pan to the next. Containment capacity is increased as the spill travels from TrackPan to TrackPan. Unlike carbon steel track pans, Ultra–TrackPans will not rust or corrode. Their polyethylene construction features a UV inhibitor that resists the degrading effects of the sun. These lightweight TrackPans can be easily installed without heavy lifting equipment. Minimal tools and labor are required. Track Pan Grates allow spills to flow below to the Track Pans while providing a level surface for walking or performing maintenance and repairs. Track Pan Covers are designed to work with the Track Pan Grates to shelter the Track Pans from rain and other elements. The Polyethylene Covers are left in place until the railcar(s) arrive to be off–loaded or loaded. Lightweight covers mechanically lock into the polyethylene grates and will not blow off in windy conditions. Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.
Prevent Costly Cleanup and Regulatory Fines Modular Design – Center and Side Pans are 53" long; containment areas can be conveniently assembled to any length desired
All–Polyethylene Construction – Rugged TrackPans withstand harsh chemicals and are designed to function in temperatures ranging from –40°F to +140°F
Economical and easy to install
Meets New York State Chemical Bulk Storage Regulation Section 599.17C – Secondary Containment for Transfer Stations
SPECIFICATIONSCan be used only on Side Track Pans w/Grates - 11 lbs.1 cover for side track pan56" L x 27.75" W

UltraTech
Grate Only, Polyethylene, 52" x 26" x 4"
$118.07
Manufacturer: UltraTech, Manufacturer Part Number: 9573Grate, Polyethylene, 52" x 26" x 4", For Spill Deck Plus, Spill Pallet Plus and IBC Spill Pallets and Track Pans.

UltraTech
Rebar Fasteners and Caps
$105.63
Manufacturer: UltraTech, Manufacturer Part Number: 9584The Rebar Fasteners and Protective Caps come in precut lengths that are designed exclusively for securing Side Track Pans to the rail. Comes complete with 20 Fasteners and Caps.SPECIFICATIONS30 lbs.20 fasteners and 20 caps2' L

UltraTech
Side Track Pan w/Grate for Ultra-TrackPans
$408.24
Manufacturer: UltraTech, Manufacturer Part Number: 9576Capture Hazardous Spills From Railroad Tanker Cars. Ultra–TrackPans have been designed to provide spill containment at railroad sidings and locomotive maintenance facilities. Available in virtually any length, Ultra–TrackPans may be used to collect incidental spills and drips OR to capture and channel off significant spills caused by defective equipment or a major overflow. Center Track Pans fit between the rails while Side Track Pans fit on either side of the rails, providing complete spill coverage and containment. All pans are connected "end to end" with bulkhead fittings, allowing spills to flow from one pan to the next. Containment capacity is increased as the spill travels from TrackPan to TrackPan. Unlike carbon steel track pans, Ultra–TrackPans will not rust or corrode. Their polyethylene construction features a UV inhibitor that resists the degrading effects of the sun. These lightweight TrackPans can be easily installed without heavy lifting equipment. Minimal tools and labor are required. Track Pan Grates allow spills to flow below to the Track Pans while providing a level surface for walking or performing maintenance and repairs. Track Pan Covers are designed to work with the Track Pan Grates to shelter the Track Pans from rain and other elements. The Polyethylene Covers are left in place until the railcar(s) arrive to be off–loaded or loaded. Lightweight covers mechanically lock into the polyethylene grates and will not blow off in windy conditions. Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily.
Prevent Costly Cleanup and Regulatory Fines Modular Design – Center and Side Pans are 53" long; containment areas can be conveniently assembled to any length desired
All–Polyethylene Construction – Rugged TrackPans withstand harsh chemicals and are designed to function in temperatures ranging from –40°F to +140°F
Economical and easy to install
Meets New York State Chemical Bulk Storage Regulation Section 599.17C – Secondary Containment for Transfer Stations
SPECIFICATIONS19 gal. Sump Capacity - 60 lbs.1 side track pan, 1 bulkhead fitting, 1 piece treated lumber, 2 gaskets, 1 grate53.5" L x 27.5" W x 6" H

UltraTech
Track Pans-3' fitting Below Grade
$102.80
Manufacturer: UltraTech, Manufacturer Part Number: 9559Track Pans – 3" Diameter Bulkhead fitting – For Below Grade Piping.

UltraTech
Track Pans-Grate only for Center Pan-LT
$137.07
Manufacturer: UltraTech, Manufacturer Part Number: 9571Replacement Grate for UltraTrack Pans with Stormwater Feature – Left Grate.

UltraTech
Track Pans-Grate only for Center Pan-RT
$137.07
Manufacturer: UltraTech, Manufacturer Part Number: 9572Replacement Grate for UltraTrack Pans with Stormwater Feature – Right Grate.