Over $1,000

Manufacturer: Vestil, Manufacturer Part Number: BTA-07005454Uniform Capacity (lbs.): 7000, Height Difference (in.) at 8 degree/17%: 6, Height Difference (in.) at 11 degrees/19%: 8–1/2, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 54 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08005454Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 6, Height Difference (in.) at 11 degrees/19%: 8–1/2, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 54 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-10005460Uniform Capacity (lbs.): 10000, Height Difference (in.) at 8 degree/17%: 7, Height Difference (in.) at 11 degrees/19%: 10, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 60 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05005466Uniform Capacity (lbs.): 5000, Height Difference (in.) at 8 degree/17%: 8, Height Difference (in.) at 11 degrees/19%: 11, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–3/4, Usable Length (in.) : 66 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06005466Uniform Capacity (lbs.): 6000, Height Difference (in.) at 8 degree/17%: 8, Height Difference (in.) at 11 degrees/19%: 11, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 66 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-07005466Uniform Capacity (lbs.): 7000, Height Difference (in.) at 8 degree/17%: 8, Height Difference (in.) at 11 degrees/19%: 11, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 66 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08005466Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 8, Height Difference (in.) at 11 degrees/19%: 11, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 66 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-10005472Uniform Capacity (lbs.): 10000, Height Difference (in.) at 8 degree/17%: 8–1/2, Height Difference (in.) at 11 degrees/19%: 12, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 72 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-15005472Uniform Capacity (lbs.): 15000, Height Difference (in.) at 8 degree/17%: 8–1/2, Height Difference (in.) at 11 degrees/19%: 12, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 47–3/4, Usable Length (in.) : 72 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08005472Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 8–1/2, Height Difference (in.) at 11 degrees/19%: 12, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 72 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-05005478Uniform Capacity (lbs.): 5000, Height Difference (in.) at 8 degree/17%: 9, Height Difference (in.) at 11 degrees/19%: 13, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 78 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06005478Uniform Capacity (lbs.): 6000, Height Difference (in.) at 8 degree/17%: 9, Height Difference (in.) at 11 degrees/19%: 13, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 78 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06005484Uniform Capacity (lbs.): 6000, Height Difference (in.) at 8 degree/17%: 10, Height Difference (in.) at 11 degrees/19%: 14, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 84 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08005484Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 10, Height Difference (in.) at 11 degrees/19%: 14, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 47–3/4, Usable Length (in.) : 84 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Bradley, Manufacturer Part Number: PNL54-1/4-SSTOILET PARTITION PANEL, STAINLESS STEEL, 54 1/4"WX58"H PERMASEAL DESIGN LOCKS FACING METAL SHEETS INTEGRALLY TOGETHER AROUND THE PERMIMETER OF PANELS, DOORS AND PILASTERS, KEEPING OUT MOISTURE AND RUST PENETRATION, GUARANTEED FOR 15 YEARS, 69% RECYCLED CONTENT (AVERAGE) CONSISTING OF 25–30% POST CONSUMER (AVERAGE), 35–45% POST–INDUSTRIAL (AVERAGE). Kit: YES.

Experience dependable and efficient chip removal with the 55 Gallon Chip Vac (Part Number: 6393). Engineered to handle both wet and dry chips, powders, and particles, this industrial vacuum is ideal for recycling operations. Its design, featuring no moving parts, reduces the need for maintenance and prevents clogs, while its compressed air operation runs roughly 50% quieter than electric vacuums, ensuring a safer and quieter work environment.Key Features & Benefits No moving parts for reduced maintenance and clog prevention Heavy-duty design for continuous, reliable use in industrial settings Compressed air operation provides quieter performance and enhanced safety Convenient drum transfer to keep materials separated for recycling What’s Included Aluminum vacuum body for improved durability 0.1-micron filter bag for capturing fine particles 10-foot flexible vacuum hose (1–1/2″ diameter) 24½″ chip wand for targeted chip pickup Drum lid that fits standard steel drums (30, 55, or 110 Gallons) Optional Deluxe models include floor pickup tools and a drum dolly; Premium models come with the drum for complete convenience Applications & Use Cases CNC machines, lathes, and milling machines Saws, drills, grinders, and routers Molding machines and absorbent pickup operations Discover more Exair products in our Exair collection or explore our Drum Vacuums for additional industrial solutions.

Exair’s Heavy Duty HEPA Vac turns a regular open-top drum into a powerful industrial vacuum engineered for the toughest environments. Designed for high-capacity cleaning, this heavy-duty HEPA vacuum provides HEPA-quality filtration that captures 99.97% of particles at 0.3 microns. Its durable construction makes it ideal for dusty industrial settings, ensuring efficient, long-lasting performance with minimal wear.Key Features & Benefits• HEPA Filtration – Provides 99.97% efficiency at 0.3 microns for excellent contaminant control.• Versatile Drum Compatibility – Easily attaches to 30-, 55-, or 110-gallon open-top drums.• Static-Resistant Hoses – Comes with a 10-foot static-resistant hose and a 20-foot compressed air hose to prevent electrical shocks.• Maintenance-Free Operation – With no moving parts, it delivers a reliable cleaning process even under demanding conditions.Inclusions & Components• HEPA Filter & Pre-Filter – Essential for capturing fine particles and protecting the entire system.• Hoses – Includes a 10-foot static-resistant hose and a 20-foot compressed air hose for optimal performance.• Control Accessories – Equipped with a shutoff valve and gauge for balanced operation.• Heavy Duty Tools, Tool Holder & Drum Dolly – Completes the Deluxe Heavy Duty HEPA Vac system for an all-in-one cleaning solution.• Note: The 110-Gallon version is available as a premium system with enhanced features.Learn more about our Exair product line and its industrial applications at our Exair collection. Upgrade your cleaning efficiency today!

Transform your standard 55-gallon drum into a robust, industrial-grade vacuum system with the EXAIR Heavy Duty Dry Vac. This compressed air-powered vacuum is engineered to clean more dry materials in less time, reducing wear and ensuring reliable performance without electricity or moving parts.Key Features Converts ordinary 55-gallon, open-top drums into powerful vacuum systems No moving parts for maintenance-free operation Hardened construction designed for efficient, rapid dry material pickup Quiet operation suitable for a variety of industrial applications What’s in the Kit Heavy Duty Dry Vac unit Steel lid tailored for the specified drum size 0.1 micron filter bag with 99.92% efficiency 10-foot, 1-1/2" static-resistant hose 24" chip wand for controlled application Ideal ApplicationsIdeal for industrial cleanups, this 55-gallon vacuum system excels at managing abrasive substances like steel shot, garnet, metal chips, and sand. Its reliable design also makes it well-suited for general duty applications including machine maintenance, floor cleaning, and work station decontamination. For a wider range of industrial vacuum solutions, explore our Drum Vacuums collection.Experience the efficiency and durability of a system designed specifically for demanding industrial environments, and keep your workspace safe and compliant with Spill 911 Inc.'s expert solutions.

Experience the versatility and industrial performance of the Deluxe HEPA EasySwitch vacuum system. Engineered to manage both dry and wet materials, this 55-gallon wet dry vac distinguishes itself with an innovative filter change process. Its easy-switch feature lets you seamlessly switch from HEPA mode for dry particulates to efficient liquid cleanup—all while using minimal compressed air and operating quietly at just 79 decibels.Key Benefits• Effortless transition: Easily switch between dry and liquid applications with a simple latch release and filter removal.• HEPA certified for dry material vacuuming: Provides outstanding filtration performance for critical environments.• Universal compatibility: Fits any standard 55-gallon drum (drum not included; see Premium version if a drum is needed).• Energy efficient and reliable: Reduced compressed air usage lowers operating costs while delivering industrial-grade vacuum performance.• Complete accessory kit: Includes a drum dolly and spill recovery kit to boost practical usability on the job site.What’s Included• Drum dolly for easy maneuverability• Spill recovery kit with the necessary tools for emergency responseBuilt for the most demanding industrial cleanups, the Deluxe HEPA EasySwitch vacuum provides a dependable solution for safety and compliance in manufacturing, construction, and environmental service settings. Its innovative design and user-friendly operation make it a top choice for professionals seeking a durable, low-maintenance cleaning solution. For additional products from Exair, visit our Exair collection for a full range of industrial safety systems.

The 55 Gal High Lift Chip Trapper by Exair (Manufacturer Part Number: 6190) is designed to efficiently separate and remove chips, swarf, and shavings from used coolants and various liquids. Built for industrial applications, it pumps liquids farther, higher, and thicker—ensuring that only clean liquid is returned to your system. With nearly 30 years of expertise supporting Spill 911 Inc., this solution is perfect for tanks, sumps, parts washers, and storage containers.Key Benefits Pumps farther, higher, and thicker liquids for versatile operation Vacuums only the liquid while trapping solid debris in a reusable filter bag Contains no moving parts, ensuring spill-free and quiet performance Features a built-in pressure/vacuum relief valve for enhanced safety How It Works Set the unit to “fill” to vacuum liquid contaminated with debris Switch to “empty” mode to return clean coolant Easily install on machines with sumps, tanks, or containers holding contaminated liquid What’s Included High Lift Reversible Drum Vac pump assembly Directional flow valve 55-gallon drum option Safety shutoff valve Flexible vacuum and compressed air hoses Chip wand and filter bags Drum dolly Patented under Patent #8153001 and #8268179, this device delivers reliable performance. Please note: do not use with low flash point or flammable liquids (e.g., fuel oil, alcohol, gasoline) to avoid safety hazards.Discover more innovative solutions in our Exair Products Collection.

The 55 Gal Stainless Drum Vac is engineered for rapid drum filling and emptying, making it an ideal solution for industrial applications. Crafted from durable stainless steel, this drum vacuum pump consistently delivers reliable performance—filling a 55-gallon drum in less than two minutes and emptying it with a simple twist of the control knob. Designed for use with closed-head 30, 55, or 110-gallon drums (minimum 16‐ga. steel), it provides a perfect blend of speed and precision.Key Features & Specifications• Fast operation: Fills a 55-gallon drum in under two minutes.• Reversible function: Easily switches between vacuuming and dispensing.• Precision control: A simple knob adjustment regulates the flow rate for optimal performance.• Versatile compatibility: Works with 30, 55, or 110-gallon closed-head steel drums (min. 16‐ga.).• Rugged construction: Durable stainless steel ensures long-lasting reliability.Applications & InclusionsIdeal for coolant sump refills, cleaning floor spills, and transferring contaminated liquids, this vacuum system meets a variety of industrial needs. The package includes a Reversible Drum Vac, a stand pipe, a 10-foot quick disconnect suction/discharge hose, and a 24-inch chip wand.Experience efficient spill management with the 55 Gal Stainless Drum Vac—your dependable solution for fast and safe operations. Explore similar products in our Drum Vacuums collection.

The Exair Chip Trapper System (Manufacturer Part Number: 6198) uses innovative, patent-pending technology to efficiently separate chips, swarf, and shavings from used coolants and other liquids. This high-lift chip trapper is designed for rapid, spill-free cleaning in industrial settings. Its unique process traps debris in a reusable filter bag while only clean liquid is recirculated, offering a fast and safe cleaning solution for machines with sumps, parts washers, tanks, and storage containers. Compatible with 30-, 55-, or 110-gallon drums, this system is built for versatility and operational efficiency.Features & Benefits• Operates without moving parts for enhanced durability• Self-priming design with compressed air for quick drum filling or emptying• Efficient, spill-free cleanup that improves safety and reduces downtime• Patent-pending technology ensures reliable separation of solids from liquidsApplications• CNC machines and lathes• Parts washers and metalworking equipment• Tanks, pans, and contaminated liquid storage containers• Industrial coolant recovery systemsWhat’s Included• Reversible Drum Vac that fills or empties a 55-gallon drum in under two minutes• Chip Trapper Valve assembly for seamless operation• A flexible 10’ hose and chip wand for targeted cleaning• Two 5-micron filter bags (with additional micron options available separately)• Drum options: 30, 55, or 110 gallons for versatile useFor more information on our chip trapper systems, visit our Chip Trappers collection or explore more solutions for industrial safety in our Exair collection.Safety Note: Use caution when processing liquids with low flash points, and consult safety guidelines to ensure proper handling.

Experience industrial-grade cleaning with the Heavy Duty HEPA Vac that transforms any 30, 55, or 110-gallon open-top drum into a powerful cleaning station. Perfect for dusty environments, this system offers HEPA-level filtration to capture contaminants efficiently while reducing wear on your equipment.Key Features Compressed Air Operated: Uses compressed air for consistent performance with minimal moving parts. Versatile Drum Compatibility: Works seamlessly with 30, 55, and 110-gallon drums (the 110-gallon model is available as a premium system). HEPA Filtration: Designed to meet stringent HEPA standards for environments that require high-efficiency particulate air cleaning. Durable Design: Built for heavy-duty operations, minimizing wear and ensuring long-lasting performance. Easy Integration: Attaches effortlessly to standard drums, simplifying clean-ups in industrial settings. Technical Specifications Manufacturer Part Number: 6199 Drum Type: Compatible with open-top drums (30, 55, and premium 110-gallon models). Filtration Standard: HEPA quality for industrial use. What’s in the Box Heavy Duty HEPA Vac unit Essential mounting hardware User installation guide Discover more innovative solutions in our Exair collection or explore our latest additions in the New Products section. This Heavy Duty HEPA Vac is designed to provide reliable performance and exceptional value, ensuring your operations remain safe and efficient.

Manufacturer: Wesco, Manufacturer Part Number: 240039Empty drums while sitting down! Fork truck driver does not have to leave truck to dispense. Offers a versatile drum dispensing capability that does not require hoists. Geared design allows controlled dumping and dispensing. Has and 800 pound capacity for a full drum and a 500 pound capacity for a half–full drum. Ships completely assembled. Adapter available for 30–gallon steel drums.SPECIFICATIONS180 lbs.1 dispenser20.5" H x 38" W x 32.5" D