Over $1,000

Manufacturer: Ex-Cell Kaiser, Manufacturer Part Number: ARENA-51-T-SS-BLKArena perforated 51-gal trash receptacle, stainless steel w/black texture dome top w/12" opening & black laser TRASH graphics

Manufacturer: Ex-Cell Kaiser, Manufacturer Part Number: ARENA-X51-SS-BLKArena perforated outdoor 51-gal stainless steel receptacle, w/plastic pass-through dome top, no graphics

Manufacturer: Ex-Cell Kaiser, Manufacturer Part Number: ARENA-X51-T-SS-BLKArena perforated outdoor 51-gal trash receptacle, stainless steel w/plastic pass-through dome top & black laser TRASH graphics

Manufacturer: Ex-Cell Kaiser, Manufacturer Part Number: ARENA-X51-R-SS-RBLArena perforated outdoor 51-gal recycling receptacle, stainless steel w/plastic pass-through dome top & blue laser RECYCLE graphics

Manufacturer: Denios, Manufacturer Part Number : M31-8030 -Maximum fire resistance and safety when storing gas cylinders in work areas -Fire resistance 90 minutes, type-tested in accordance with EN 14470-2 -Complete and even ventilation in the whole interior of the cabinet -Integrated air ducts ready for connection (Ø 3“) to a technical exhaust system -Easy alignment with adjusting aids to compensate for uneven floor -Easy mounting of connecting pipes and gas fittings with large interior height (73.1 in), many lead-through possibilities on the top of the cabinet -Standard interior equipment completes with mounting rails, cylinder retainer including matching tension belts and rolling ramp -Doors lockable with profile cylinder (integration in an existing locking system possible) -Outer body and doors are made of sheet steel, with high-quality powder coating in light gray -Regulations and Compliance: OSHA|NFPA -Maximum Cylinder Diameter (in): 9 -Storage Capacity Gas Cylinders: 3 -Color: Gray -Door Type: Hinged

Manufacturer: Denios, Manufacturer Part Number : M31-8010 -This Flammable Storage Cabinet provides safe and approved storage of flammable hazardous substances in working areas -Construction fire rated for 30 minutes -Body color Anthracite Gray, with wing doors in Warning Yellow -Interior equipment includes 3 shelves, 1 perforated insert, 1 bottom spill sump (sheet steel powder-coated) -Tray shelves with chemical resistant surfave lamination and removable plastic sump, bottom collecting plastic sump -Robust construction and longevity: triple hinged door; safety elements assembled outside the storage compartment for increased protection against corrosion; scratch- and impact-resistant surface; easy to clean -Effortless use: one-hand operation for double-door cabinets (AGT) -User-friendly and safe: door open arrest system (standard), convenient and safe removal or storage of conainers -Lockable doors -Easy transport: integrated transport base with removable, optional base cover -Easy alignment: adjusting aids to compensate for uneven floor -Ventilation: integrated air ducts -34 in wide storage space -Regulations and Compliance: SPCC|OSHA|NFPA|UL-Listed -No. Of Shelves: 3 -Sump Capacity [gal]: 5.8 -Total Capacity [gal]: 50 -Total Load Capacity [lbs]: 1323 -Color: Anthracite -Door Type: Hinged -Fire Rating: 30 minutes

Manufacturer: Denios, Manufacturer Part Number : M31-8020 -FM 6050 approval and UL / ULC listed -Safe Storage of flammable liquids with 90-minutes of protection tested according to EN 14470-1 -Absolute minimization of fire risk and protection of storage containers in case of fire -Robust construction and longevity: triple hinged door; safety elements assembled outside the storage compartment for increased protection against corrosion Scratch- and impact-resistant surface; easy to clean -Body-color Anthracite Gray, with wing doors in Warning Yellow -Self-sealing doors and self-closing vent connections in the event of a fire for absolute protection of stored flammables and minimization of fire risk -Easy in-house transport - integrated transport base with optionally available base cover -Integrated air ducts ready for connection (Ø 3“) to a technical exhaust system -Standard interior equipment with 3 tray shelves, 1 perforated insert, 1 bottom collecting sump (sheet steel powder-coated) -Regulations and Compliance: SPCC|OSHA|NFPA|UL-Listed -No. Of Shelves: 3 -Sump Capacity [gal]: 8.7 -Total Storage Capacity [gal]: 75 -Color: Anthracite -Door Type: Hinged -Total Load Capacity [lbs]: 1323 -Fire Rating: 90 minutes

Manufacturer: Morse, Manufacturer Part Number: 311-1-220-50TILT–TO–LOAD TUMBLER 310–1–220–50 WITH AUTOMATED CONTROL PACKAGE & ENCLOSURE WITH SAFETY INTERLOCK

Manufacturer: Morse, Manufacturer Part Number: 311-1-230TILT–TO–LOAD DRUM TUMBLER 310–1–230 WITH AUTOMATED CONTROL PACKAGE & ENCLOSURE WITH SAFETY INTERLOCK

Manufacturer: Morse, Manufacturer Part Number: 311-3-575TILT–TO–LOAD DRUM TUMBLER 310–3–575 WITH AUTOMATED CONTROL PACKAGE & ENCLOSURE WITH SAFETY INTERLOCK

Manufacturer: Valley Craft, Manufacturer Part Number: F86165A5Gravity–Actuated Mechanical Auto–Grip DH is exclusively designed for use with 55–gallon plastic drums. 3" jaws fit snugly under top rim of full or empty plastic drums. Turnbuckle mechanism adjusts to grasp any cylindrical object 22–24" in diameter. Spring–and–cam actuated jaws automatically grip while pressure of the drum forces them down. Fork–mounted to easily attach and unattach from forklift in seconds. Handles up to 15000 lbs.SPECIFICATIONS48" x 42" x 13.75" - 124 lbs.

Manufacturer: Valley Craft, Manufacturer Part Number: 6145BAuto–Grip™ features spring–and–cam actuated rubber–lined jaws for secure handling of 30, 55 and 85–gallon drums. Manually adjustable to handle drums from 18" – 28" in diameter.SPECIFICATIONS1,500 lbs. Load Bearing Capacity - 126 lbs.1 grabFork Mounted

The Automatic High Speed Strapping Machine delivers outstanding productivity and ease of use for polypropylene strapping applications. Engineered to enhance cycle times and minimize downtime, this innovative solution features advanced automation that simplifies your strapping processes.Key Features & Benefits• inAuto-Feeding – Automatically feeds the polypropylene strapping, ensuring a smooth and consistent application.• inAuto-Positioning – Precisely positions and secures the strap during every cycle, increasing accuracy.• inJam-Free Mechanism – Detects and resolves missed cycles, reducing downtime and boosting efficiency.• Multiple Control Options – Operators can choose from panel-mounted controls, a foot pedal, or a tabletop ball switch for convenient operation.Technical Specifications• Manufacturer: Vestil• MFG Part Number: ASM-3123• Strapping Type: Heat welded polypropylene (strap sold separately)• Cycle Variability: Production rates depend on package size, chute dimensions, and operator skill.• For more detailed industrial solutions, explore our Vestil collection.Usage & CompatibilityThis machine is designed for versatility, accommodating various strapping widths and allowing for easy reloading. Its portable design makes it perfect for dynamic industrial environments, ensuring that both material handling and production efficiency meet your operational requirements.Experience reliable, high-speed strapping performance with the Automatic High Speed Strapping Machine—the ideal solution to elevate your industrial processes.

Manufacturer: UltraTech, Manufacturer Part Number: 4609DON'T MASK ODORS. ELMINATE THEM FOREVER. The most innovative odor remover in the universe. Aveho completely eliminates odors. It doesn't cover, mask or try to overpower them with heavy perfumes or scents. Aveho Odor Control Technology represents a whole new category of odor control with a unique, patented process that completely removes odors. Traditional odor control solutions have various capacity, performance or cost limitations. Aveho is an engineered material consisting of micro–sized particles that capture and physically bind odor–causing compounds. Odors are not masked, they are removed. How Does It Work? If you REALLY want to know the magic of how Aveho works... then you have too much time on your hands. Kidding! Think of it like this. Aveho is a spoiled kid. And odors are candy. Try as you might, you're not getting any candy away from that kid. Similarly, once Aveho gets a hold of odors, they're not getting away. The more technical, albeit less amusing explanation is that the metal oxides of the Aveho technology latch on to the chemicals that create the odors in the air and liquids. By doing so, they adsorb or catalytically convert these odor–causing chemicals, removing them from the atmosphere and eliminating the odors from your sense of smell. Go ahead and give it a try. You have nothing to lose, except the Odors!

Manufacturer: UltraTech, Manufacturer Part Number: 4608DON'T MASK ODORS. ELMINATE THEM FOREVER. The most innovative odor remover in the universe. Aveho completely eliminates odors. It doesn't cover, mask or try to overpower them with heavy perfumes or scents. Aveho Odor Control Technology represents a whole new category of odor control with a unique, patented process that completely removes odors. Traditional odor control solutions have various capacity, performance or cost limitations. Aveho is an engineered material consisting of micro–sized particles that capture and physically bind odor–causing compounds. Odors are not masked, they are removed. How Does It Work? If you REALLY want to know the magic of how Aveho works... then you have too much time on your hands. Kidding! Think of it like this. Aveho is a spoiled kid. And odors are candy. Try as you might, you're not getting any candy away from that kid. Similarly, once Aveho gets a hold of odors, they're not getting away. The more technical, albeit less amusing explanation is that the metal oxides of the Aveho technology latch on to the chemicals that create the odors in the air and liquids. By doing so, they adsorb or catalytically convert these odor–causing chemicals, removing them from the atmosphere and eliminating the odors from your sense of smell. Go ahead and give it a try. You have nothing to lose, except the Odors!

Manufacturer: Haws, Manufacturer Part Number: 7360BTWCThe Haws 7360BTWC barrier-free emergency eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Unit is equipped with an in-line 50 x 50 mesh water strainer and flip top dust covers, so when debris is present, the irrigation process stays protected. Space efficient design allows the 7360BTWC to be mounted in a number of easily accessible locations while providing a barrier-free standard. -Low profile design accommodates wheelchair access -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested. Unit also comes with trap and tailpiece to meet desired wall mounting requirements -ANSI/ISEA Z358.1 tempering compliance options Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 7655WCCModel 7655WCC barrier-free eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. -Wall mount combination strobe light and alarm horn special available -Easy access exterior mounted in-line strainer Eye/face wash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish -The eye/face wash head is easily activated by the emergency equipment's pull-down design -ANSI/ISEA Z358.1 tempering compliance options -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8330Haws Model 8330 Type 304 Stainless Steel combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. The combination unit is equipped with an in-line 50 x 50 mesh water strainer and eyewash dust cover to keep the irrigation process protected. A great addition to unsafe environments where the eyes, face, and body may be exposed to corrosive materials. -Features an 11" (27.9 cm) bowl and 9" (22.9 cm) floor flange -Eye/face wash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Requires minimal maintenance and is equipped with test card to record weekly testing -AXION MSR drench showerhead with flow control delivers dispersed flow for uniform drenching -Reducing installation time, eyewash and valve assembly is pre-built and fully water/pressure tested -Solid 1-1/4" stainless steel construction makes for a sturdy piece of corrosive resistant equipment -Provided with universal emergency sign and high-visibility stripe -Supply and Waste: 1-1/4" NPT -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8300CRP-8309CRPModel 8300CRP-8309CRP corrosion resistant combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching -Also features a stainless steel push flag for eyewash activation, stainless steel pull rod for shower activation, a round 11" (27.9 cm) stainless steel bowl, mesh in-line eyewash strainer to collect line debris, and ball valves with stainless steel ball and stem for durability -1-1/4" Schedule 40 hot-dipped galvanized steel piping with green corrosion resistant epoxy coating protects for years of service. Supply and Waste: 1-1/4" NPT -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment. Due to technology advancements these (two models) are now the same.

Manufacturer: Haws, Manufacturer Part Number: 8309WCModel 8309WC barrier-free combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly. This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors’ office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature’s ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -AXION MSR ABS plastic drench showerhead with flow control delivers dispersed flow for uniform drenching -Barrier-free design offers a low profile loop assembly allowing for better wheel chair access as well as a longer pull rod for shower activation -Also features a stainless steel push flag for eyewash activation, a round 11" (27.9 cm) stainless steel bowl, stainless steel pull rod for shower activation, and ball valves with -stainless steel ball and stem for durability -Pipe and fitting: 1-1/4" Schedule 40 hot-dipped galvanized steel. Supply and Waste: 1-1/4" NPT -ANSI/ISEA Z358.1 tempering compliance options -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number: 8133HModel 8133H, horizontal overhead safety shower features the AXION MSR hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Outfitted with safety features like a self-regulating shower stream and universal emergency sign, this horizontally designed drench shower is designed for safety. -A great addition to potentially unsafe environments where the body may be exposed to corrosive materials -Requires minimal maintenance and is equipped with test card to record weekly testing -Reduced installation time due to pre-built valve assembly and unit's ability to be mounted horizontally from any wall -Solid construction from Schedule 40 Type 304 Stainless Steel makes for a durable long lasting product -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment

Manufacturer: Haws, Manufacturer Part Number: 7777Model 7777 all stainless steel pedestal mounted eye and face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Unit also is equipped with an in-line 50 x 50 mesh water strainer and yellow eyewash head dust cover so when debris is present, the irrigation process stays protected. Solid mounted pedestal design allows the 7777 to be placed securely in multiple locations. -A great addition to unsafe environments where the eyes and face may be exposed to corrosive materials -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested -Corrosion resistant construction from Type 304 Stainless Steel with a Type 316 Stainless Steel ball valve -ANSI/ISEA Z358.1 tempering complianceoptions -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment

Manufacturer: Haws, Manufacturer Part Number: 7778BModel 7778B all stainless steel wall mounted eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). This revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, natures ocular cavity drain. Unit is equipped with an in-line 50 x 50 mesh water strainer and yellow plastic eyewash head dust cover, so when debris is present, the irrigation process stays protected. Space efficient stainless steel design and integral wall bracket allow the 7778B to be mounted in a number of easily accessible locations. -A great addition to multiple unsafe environments where the eyes and face may be exposed to corrosive materials -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Easily detected and maintained, emergency equipment is equipped with safety sign and test card to record weekly testing -Reducing installation time, eye/face wash and valve assembly is pre-built and fully water/pressure tested -Type 304 Stainless Steel construction with a Type 316 Stainless Steel ball valve -ANSI/ISEA Z358.1 tempering complianceoptions -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment

Manufacturer: Haws, Manufacturer Part Number: 8164Model 8164, flush to ceiling-mounted drench shower features the AXION MSR hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Outfitted with safety features like a self-regulating shower stream and universal emergency sign, this drench shower is designed for safety. -Concealed piping and a high polished showerhead provides an aesthetically pleasing piece of equipment -Versatile design allows for shower head to be flush ceiling mount or to hang down from the ceiling -A great addition to multiple potentially unsafe environments where the body may be exposed to corrosive materials -Requires minimal maintenance and is equipped with test card to record weekly testing -Reduced installation time with a pre-built valve assembly -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment