Newest Products

Enhance the performance of your Gemini Dual Containment® Tank with the WeatherGuard™ Seal Kit, specially designed for outdoor installations. This innovative seal kit is engineered to prevent rainwater intrusion using high-density, chemical-resistant elastomeric foam. It delivers a secure, lasting seal that minimizes maintenance and corrosion concerns. Perfect Fit: Custom-engineered to snugly cover the top flange of your secondary containment tank, ensuring maximum protection. Superior Materials: Uses closed-cell, high-density elastomeric foam that effectively repels moisture and chemicals. Effortless Installation: Features a pressure-sensitive adhesive for a tool-free, quick setup in minutes. Pre-Installed Option: Available on new tanks for added convenience and guaranteed factory-fit quality. Cost-Saving Reliability: Reduces risks of mold, algae growth, and corrosion, lowering overall maintenance expenses. This reliable WeatherGuard™ Seal Kit not only safeguards your equipment but also helps maintain a clean, dry tank environment—empowering your operations with lasting, cost-effective protection.More DetailsManufacturer: Peabody EngineeringManufacturer Part Number: 02-36363For additional innovative safety solutions, explore our Peabody Engineering collection.

Manufacturer: Morse, Manufacturer Part Number: 92-5M Specific to Model 92-5M -Model 92-5M has Spark Resistant Parts-Designed for 5-gallon (20 liter) metal can, plastic or fiber pail with your crane or hoist-11" to 15" (27.9 to 38.1 cm) diameter-Can lid must be on and secure-Self-adjusting tong-like action when you raise the hook-Every unit is independently load tested at the factory at 125% of rated capacity-Ships with load test certificate ***PLEASE CONTACT US FOR CURRENT PRICING***

Manufacturer: Morse, Manufacturer Part Number: 7-17Specific to Model 7-17 -Clamp Collar secures Drum Cone to drum -Fits 17-3/8" (44.1 cm) drum rim outside diameter -IMPORTANT: Remove drum lid. Then measure drum top rim outside diameter WITHOUT lid. -Tighten Clamp Collar around top rim of drum with Cone in place -Tighten Clamp Collar by turning knob on end of threaded rod -On inside of Clamp Collar, sections of rod retain Cone, and sections of angle engage under top rim of drum

Manufacturer: Morse, Manufacturer Part Number: 7-20Specific to Model 7-20 -Clamp Collar secures Drum Cone to drum -Fits 20-3/8" (51.75 cm) drum rim outside diameter -IMPORTANT: Remove drum lid. Then measure drum top rim outside diameter WITHOUT lid. -Tighten Clamp Collar around top rim of drum with Cone in place -Tighten Clamp Collar by turning knob on end of threaded rod -On inside of Clamp Collar, sections of rod retain Cone, and sections of angle engage under top rim of drum

Manufacturer: Morse, Manufacturer Part Number: 5-VF-90-21.5Specific to Model 5-VF-90-21.5 -90 Degree Asymmetric Drum Cone made of 16 gauge carbon steel -Fits 21-7/8" (55.6 cm) drum rim outside diameter, measured with drum lid removed -Has 6" (15.2 cm) diameter discharge opening with valve flange -Order separate Clamp Collar model 7-21.5 to Secure Cone to drum -Attach valve to Cone flange to stop, start and control flow -Valves Kits each sold separately *Kit IV is Iris Valve *Kit SG is Slide Gate

Manufacturer: Morse, Manufacturer Part Number: 5-VF-90-20Specific to Model 5-VF-90-20 -90 Degree Asymmetric Drum Cone made of 16 gauge carbon steel -Fits 20-3/8" (51.75 cm) drum rim outside diameter, measured with drum lid removed -Has 6" (15.2 cm) diameter discharge opening with valve flange -Order separate Clamp Collar model 7-20 to Secure Cone to drum -Attach valve to Cone flange to stop, start and control flow -Valves Kits each sold separately *Kit IV is Iris Valve *Kit SG is Slide Gate

Manufacturer: Morse, Manufacturer Part Number: 5-VF-90-19Specific to Model 5-VF-90-19 -90 Degree Asymmetric Drum Cone made of 16 gauge carbon steel -Fits 19-1/8" (48.6 cm) drum rim outside diameter, measured with drum lid removed -Sized for typical 30-gallon (114 liter) steel drum -Has 6" (15.2 cm) diameter discharge opening with valve flange -Order separate Clamp Collar model 7-19 to Secure Cone to drum Attach valve to Cone flange to stop, start and control flow -Valves Kits each sold separately *Kit IV is Iris Valve *Kit SG is Slide Gate

Manufacturer: Morse, Manufacturer Part Number: 5-VF-90-18.5Specific to Model 5-VF-90-18.5 -90 Degree Asymmetric Drum Cone made of 16 gauge carbon steel -Fits 18-7/8" (47.9 cm) drum rim outside diameter, measured with drum lid removed -Has 6" (15.2 cm) diameter discharge opening with valve flange -Order separate Clamp Collar model 7-18.5 to Secure Cone to drum -Attach valve to Cone flange to stop, start and control flow -Valves Kits each sold separately *Kit IV is Iris Valve *Kit SG is Slide Gate

Manufacturer: Morse, Manufacturer Part Number: 5-VF-90-17Specific to Model 5-VF-90-17 -90 Degree Asymmetric Drum Cone made of 16 gauge carbon steel -Fits 17-3/8" (44.1 cm) drum rim outside diameter, measured with drum lid removed -Has 6" (15.2 cm) diameter discharge opening with valve flange -Order separate Clamp Collar model 7-17 to Secure Cone to drum -Attach valve to Cone flange to stop, start and control flow -Valves Kits each sold separately *Kit IV is Iris Valve *Kit SG is Slide Gate

Manufacturer: Morse, Manufacturer Part Number: 5SS-VF-90-21.5 Specific to Model 5SS-VF-90-21.5 -Bead blast finished Type 304 Stainless Steel 90 Degree Asymmetric Drum Cone -16 Gauge type 304 stainless steel -Fits 21-7/8" (55.6 cm) drum rim outside diameter, measured with drum lid removed -Has 6" (15.2 cm) diameter discharge opening with valve flange -Order separate Stainless Steel Clamp Collar model 7SS-21.5 to Secure Cone to drum -Attach valve to Cone flange to stop, start and control flow -Valves Kits each sold separately *Kit IV is Iris Valve *Kit SG-SS is Stainless Steel Slide Gate

Manufacturer: Morse, Manufacturer Part Number: 5SS-VF-90-20Specific to Model 5SS-VF-90-20 -Bead blast finished Type 304 Stainless Steel 90 Degree Asymmetric Drum Cone -16 Gauge type 304 stainless steel -Fits 20-3/8" (51.8 cm) drum rim outside diameter, measured with drum lid removed -Has 6" (15.2 cm) diameter discharge opening with valve flange -Order separate Stainless Steel Clamp Collar model 7SS-20 to Secure Cone to drum -Attach valve to Cone flange to stop, start and control flow -Valves Kits each sold separately *Kit IV is Iris Valve *Kit SG-SS is Stainless Steel Slide Gate

Manufacturer: Morse, Manufacturer Part Number: 5SS-VF-90-18.5Specific to Model 5SS-VF-90-18.5 -Bead blast finished Type 304 Stainless Steel 90 Degree Asymmetric Drum Cone -16 Gauge type 304 stainless steel -Fits 18-7/8" (47.9 cm) drum rim outside diameter, measured with drum lid removed -Has 6" (15.2 cm) diameter discharge opening with valve flange -Order separate Stainless Steel Clamp Collar model 7SS-18.5 to Secure Cone to drum -Attach valve to Cone flange to stop, start and control flow -Valves Kits each sold separately *Kit IV is Iris Valve *Kit SG-SS is Stainless Steel Slide Gate

Manufacturer: Morse, Manufacturer Part Number: 5SS-VF-90-19Specific to Model 5SS-VF-90-19 -Bead blast finished Type 304 Stainless Steel 90 Degree Asymmetric Drum Cone -16 Gauge type 304 stainless steel -Fits 19-1/8" (48.6 cm) drum rim outside diameter, measured with drum lid removed -Sized for typical 30-gallon (114 liter) steel drum -Has 6" (15.2 cm) diameter discharge opening with valve flange -Order separate Stainless Steel Clamp Collar model 7SS-19 to Secure Cone to drum -Attach valve to Cone flange to stop, start and control flow -Valves Kits each sold separately *Kit IV is Iris Valve *Kit SG-SS is Stainless Steel Slide Gate

Manufacturer: Morse, Manufacturer Part Number: 5SS-VF-90-17Specific to Model 5SS-VF-90-17 -Bead blast finished Type 304 Stainless Steel 90 Degree Asymmetric Drum Cone -16 Gauge type 304 stainless steel -Fits 17-3/8" (44.1 cm) drum rim outside diameter, measured with drum lid removed -Has 6" (15.2 cm) diameter discharge opening with valve flange -Order separate Stainless Steel Clamp Collar model 7SS-17 to Secure Cone to drum -Attach valve to Cone flange to stop, start and control flow -Valves Kits each sold separately *Kit IV is Iris Valve *Kit SG-SS is Stainless Steel Slide Gate

Manufacturer: Morse, Manufacturer Part Number: 4556CSS-PSpecific to Part 4556CSS-P -Kit for customer to install -Use with Morse Drum Cone attached to drum -Prevents drum from slipping length-ways -Adjusts for 30" to 38" (76.2 to 96.5 cm) tall drum -Made of bead blast finished Type 304 stainless steel -Welds are NOT ground smooth or polished

Manufacturer: Morse, Manufacturer Part Number: 4556C-PSpecific to 4556C-P -Kit for customer to install -Use with Morse Drum Cone attached to drum -Prevents drum from slipping length-ways -Adjusts for 30" to 38" (76.2 to 96.5 cm) tall drum

Manufacturer: Morse, Manufacturer Part Number: 286-1Specific to Model 286-1 -Model 286-1 is has steel construction with durable powder coat finish All MORSPEED 1000 Series Forklift Drum Grippers -Fork-mount drum handler to lift, move and stack a drum with your forklift -Mount onto forks without any tools or power connections -Secure to forklift carriage with chain -Jaws grip drum top rim of a single drum -Drum is released once it is set down and weight is removed from jaws -MORSPEEDTM 1000 steel jaws grip upper rim of drum -Handle upright RIMMED steel, fiber or plastic drum -Requires minimum of 18" (46 cm) tall drum -Requires 50 Lb. (23 kg) minimum drum weight to actuate jaws -Requires 16-3/8" (41.6 cm) between forks -Each fork pocket opening is 6-5/8” wide x 2-1/8” high (16.8 x 5.4 cm) -Fork pockets are 26-5/8” deep (67.6 cm) -Capacity: 1000 Lb. (454 kg)

Manufacturer: Morse, Manufacturer Part Number: 195AM-A Specific to Model 195AM-A -Model 195AM-A has Spark Resistant Parts to reduce the risk of mechanical sparking in environments with flammable or explosive materials-AIR power drum tilt control with 3-position control valve on 6 foot (183 cm) hose-Requires plant air at 20 PSI at a rate of 22 SCFM-Drum holder has cinch chain and ratchet to secure a 55-gallon (210 liter), 22.5" (57 cm) diameter steel drum-Install correct MORCINCHTM Kit to handle plastic or fiber drum-Insert correct size Diameter Adapter for each smaller drum ***PLEASE CONTACT US FOR CURRENT PRICING***

Manufacturer: Haws, Manufacturer Part Number: 1119.8PModel 1119.8P vandal-resistant wall-mounted ADA water cooler and bottle filler shall include dual 18-gauge Type 304 Stainless Steel satin-finish basins, 14 gauge bottle filler bracket, 16 gauge galvanized steel in-wall mounting frame with welded-in heavy-duty 10 gauge mounting plate, vandal-resistant push button operated stainless steel valves with front accessible cartridge, in-line strainer and flow adjustment provide 100% lead free waterways, in-wall 3/16" thick steel mounting plate for the bottle filler, polished chrome-plated brass vandal-resistant bubbler heads with integral laminar anti-squirt flow, 1 gpm (3.78 L) laminar flow bottle filler, polished chrome-plated vandal resistant waste strainers, vandal-resistant bottom plates, stainless steel satin-finish back panel and louvered intrusion proof grill, high and low fountain mounting levels, and 1-1/4” NPT traps. The refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 L) of water at 50° F (10° C) cooled from 80° F (26.7° C) inlet water at 90° F (32.2° C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5. Haws electric water coolers comply with ARI Standard 1010 and ANSI A117.1, and are listed by Underwriter Laboratories to U.S. and Canadian standards. FOR INDOOR USE ONLY Product Includes: • 1119.8: Chilled Dual Drinking Fountains • 1920: Bottle Filler • HCR8: Remote Chiller • BP32: Back Panel • 67oo: Mounting Plate • 6469: Drip Tray • MTGFR.LG:Mounting Frame

Manufacturer: Haws, Manufacturer Part Number: 1119.8BModel 1119.8B ADA electric wall-mounted vandal-resistant water cooler shall include dual 18-gauge Type 304 Stainless Steel satin finish basins, 16 gauge galvanized steel in-wall mounting frame with welded-in heavy-duty 10 gauge mounting plate, vandal-resistant push button operated stainless steel valves with front-accessible cartridge, in-line strainer and flow adjustment, 100% lead-free waterways, polished chrome-plated brass vandal-resistant bubbler heads, polished chrome-plated vandal-resistant waste strainers, vandal-resistant stainless bottom plates, stainless steel satin finish back panel and louvered intrusion-proof grill, high and low fountain mounting levels, and 1-1/4" NPT concealed all cast-brass traps. The refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 L) of water at 50° F (10° C) cooled from 80° F (26.7° C) inlet water at 90° F (32.2° C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5 FOR INDOOR USE ONLY Product Includes: • 1119.8: Chilled Dual Drinking Fountains • HCR8: Remote Chiller • MTGFR.LG:Mounting Frame

Manufacturer: Haws, Manufacturer Part Number: 1109.8PModel 1109.8P ADA vandal-resistant electric wall-mounted water cooler and bottle filler shall include an 18-gauge Type 304 Stainless Steel satin-finish basin, 14 gauge bottle filler bracket, 16 gauge galvanized steel in-wall mounting frame with welded-in heavy-duty 10 gauge mounting plate, vandal-resistant push button operated stainless steel valves with front accessible cartridge and flow adjustment, in-wall 3/16" thick steel mounting plate for the bottle filler, 100% lead-free waterways, polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow, 1 gpm (3.78 L) laminar flow bottle filler, polished chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plates, satin stainless steel back panel and louvered intrusion-proof grill, and 1-1/4” NPT trap. The refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 L) of water at 50° F (10° C) cooled from 80° F (26.7° C) inlet water at 90° F (32.2° C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5. Haws electric water coolers comply with ARI Standard 1010 and ANSI A117.1, and are listed by Underwriter Laboratories to U.S. and Canadian standards. FOR INDOOR USE ONLY Product Includes: • 1109.8: Chilled Single Drinking Fountain • 1920: Bottle Filler • HCR8: Remote Chiller • 6469: Drip Tray • BP15: Back Panel • 67oo: Mounting Plate • MTGFR.SM: Mounting Frame

Manufacturer: Haws, Manufacturer Part Number: 1109.8BModel 1109.8B vandal-resistant ADA electric wall-mounted water cooler shall include an 18-gauge Type 304 Stainless Steel satin finish basin, 16 gauge galvanized steel in-wall mounting frame with welded-in heavy-duty 10 gauge mounting plate, vandal-resistant push-button operated stainless steel valve with front-accessible cartridge, in-line strainer and flow adjustment, 100% lead-free waterways, polished chrome-plated brass vandal-resistant bubbler head, polished chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plate, stainless steel satin finish back panel and louvered intrusion-proof grill, and 1-1/4" NPT concealed all cast-brass trap. The refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 L) of water at 50° F (10° C) cooled from 80° F (26.7° C) inlet water at 90° F (32.2° C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5. FOR INDOOR USE ONLY Product Includes: • 1109.8: Chilled Single Drinking Fountain • HCR8: Remote Chiller • MTGFR.SM: Mounting Frame

Manufacturer: Haws, Manufacturer Part Number: 1109.14PModel 1109.14P wall-mounted vandal-resistant ADA drinking fountain and bottle filler shall include an 14-gauge Type 304 Stainless Steel satin finish basin, 14 gauge Type 304 Stainless Steel bottle filler bracket, 3/16″ (.47 cm) thick steel mounting plates for fountain and bottle filler, 100% lead-free waterways, vandal-resistant push-button operated stainless steel valves with front accessible cartridge and flow adjustment, polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow, 1 gpm (3.78 L) laminar flow bottle filler, polished chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plates, and 1-1/4” NPT trap. In extreme environments related to heat and cold, product(s) must be protected from damage/exposure due to these extreme conditions. Product Includes: • 1109.14: Single Drinking Fountain • 6469: Drip Tray • 1920: Bottle Filler • BP3: Fountain Back Panel • BP15: Bottle Filler Back Panel • 6700: (X2) In-Wall Mounting Pate

Manufacturer: Haws, Manufacturer Part Number: 1001PModel 1001P wall mounted vandal-resistant ADA drinking fountain and bottle filler shall include an 18 gauge Type 304 Stainless Steel satin finish basin with integral swirl design, 14 gauge Type 304 Stainless Steel wall bracket and bottle filler bracket, 3/16″ (.47 cm) thick steel mounting plates for fountain and bottle filler, 100% lead-free waterways, vandal-resistant push-button operated stainless steel valves with front-accessible cartridge and flow adjustment, polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow, 1 gpm (3.78 L) laminar flow bottle filler, chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plates, and 1-1/4" (3.2 cm) O.D. waste pipe. (P-trap and stop require rear access). In extreme environments related to heat and cold, product(s) must be protected from damage/exposure due to these extreme conditions. Product Includes: • 1001: Single Drinking Fountain • 1920: Bottle Filler • BP6: Back Panel • BP15: Back Panel • 6700 (X2): In-Wall Mounting Plates