Manufacturer: Zing, Manufacturer Part Number: 7685 Zing Maintenance Department Lockout Bag Kit stores and transports lockout/tagout devices and documents. The bag is made from durable nylon. Wire framing around the top edges keeps the bag open when in use. A shoulder strap and two handles allow the bag to be easily carried to job sites. The bag has a 18" base and includes: (1) #7343 Lockout Tags, Do Not Operate, 10 Pack, (1) #7106 1" Hasp, (1) #7107 1.5" Hasp, (2) #7030 1.5" Shackle Padlocks, (1) #7271 Gate Valve Lockout 1-6.5", (1) #7290 Cable/Valve Lockout, (1) #7605 Butterfly Valve Lockout, (1) #7514 Pull Handle Valve Lockout, (1) #7249 Ball Valve Lockout 3/8" to 1.4", (1) #7250 Ball Valve Lockout 1.5" to 2.5", (1) #7294 Multi-purpose Plug/Cylinder/Valve Lockout, (1) #7632 Pneumatic Lockout

Manufacturer: Zing, Manufacturer Part Number: 7336 Padlock cabinets store and organize lockout padlocks. The cabinet is made from durable powder-coated steel with a clear plastic window. The interior of the cabinet features 21 hooks for storing padlocks. The cabinet measures 18.25"H x 15.5"W x 2"D and stores up to 41 locks.

Manufacturer: Zing, Manufacturer Part Number: 6040EZING Eco SDS Compliance/Training Center prominently stores important safety and training documents to comply with the new GHS/Hazard Communication requirements. Station is highly visible with bright red/white colors. Station is constructed from virtually indestructible high quality .060 thick 99% recycled aluminum and binders are made from 100% recycled poly that reinforce sustainability initiatives as well as compliance. Recycled materials also support LEED credits. Measures 20"H x 29"W x 4"D. Made in the USA.

Manufacturer: Zing, Manufacturer Part Number: 6041EZING Eco SDS Compliance/Training Center prominently stores important safety and training documents to comply with the new GHS/Hazard Communication requirements. Station is highly visible with bright red/white colors. Station is constructed from virtually indestructible high quality .060 thick 99% recycled aluminum and binder is made from 100% recycled poly that reinforce sustainability initiatives as well as compliance. Recycled materials also support LEED credits. Measures 20"H x 29"W x 4"D. Made in the USA.

Manufacturer: Zing, Manufacturer Part Number: 6043E ZING 6043E Right to Understand SDS Compliance Center (English/Spanish Bilingual) prominently stores important safety and training documents. The station is made in the USA from virtually indestructible, 99% recycled aluminum, and measures 23.25"H x 27.5"W x 4.75" D. The station supports compliance with OSHA standard 1910.1200, and supports sustainability initiatives and LEED credits. This station is unstocked. For a stocked station, see part # 6043.

Manufacturer: Zing, Manufacturer Part Number: 6044EZING Eco SDS Bilingual (English/Spanish) Compliance/Training Center prominently stores important safety and training documents to comply with the new GHS/Hazard Communication requirements. Station is highly visible with bright red/white colors. Station is constructed from virtually indestructible high quality .060 thick 99% recycled aluminum and binder is made from 100% recycled poly that reinforce sustainability initiatives as well as compliance. Recycled materials also support LEED credits. Measures 20"H x 29"W x 4"D. Made in the USA.

Manufacturer: Zing, Manufacturer Part Number: 7337 Padlock cabinets store and organize lockout padlocks. The cabinet is made from durable powder-coated steel with a clear plastic window. The interior of the cabinet features 28 hooks for storing padlocks. The cabinet measures 23"H x 15.5"W x 2"D and stores up to 55 locks.

Manufacturer: Zing, Manufacturer Part Number: 7332YC Key Cabinets store and organize the keys of lockout padlocks. The cabinet is made from durable powder-coated steel with a clear plastic window. The cabinet measures 18.25" x 15.5" x 2" and stores up to 60 keys. 4 mounting holes are pre-drilled for easy installation. A security lock and two keys are included.

Manufacturer: Zing, Manufacturer Part Number: 7338 Padlock cabinets store and organize lockout padlocks. The cabinet is made from durable powder-coated steel with a clear plastic window. The interior of the cabinet features 42 hooks for storing padlocks. The cabinet measures 23"H x 15.5"W x 5.5"D and stores up to 84 locks.

Manufacturer: Zing, Manufacturer Part Number: 6062E ZING 6062E Lockout Cabinet stores and organizes lockout devices. The inside shelf features 14 slots which store padlocks or hasps. The inside door features brackets for storing tags and ties. The cabinet is made in the USA from recycled stainless steel, and is UL Validated for recycled content. The cabinet features a handle for easy portability, and is also pre-drilled for easy mounting if a more permanent location is desired. The cabinet measures 17"H x 15-1/4"W x 5-1/2"D.

Manufacturer: Zing, Manufacturer Part Number: 7333YC Key Cabinets store and organize the keys of lockout padlocks. The cabinet is made from durable powder-coated steel with a clear plastic window. The cabinet measures 18.25" x 15.5" x 4" and stores up to 160 keys. 4 mounting holes are pre-drilled for easy installation. A security lock and two keys are included.

Manufacturer: Zing, Manufacturer Part Number: 7377 Our padlock cabinets are made of special grade metallic sheet, ensuring durability and security. Padlock Cabinet can store up to 112 padlocks. To facilitate easy opening, an ergonomic PVC bracket is provided on the front side of the cabinet. The cabinets are powder coated in red. The deep cabinet design with staggered hooks allows for extra space, providing ample room for padlocks to hang. Each cabinet is supplied with a security lock and two keys for added protection. For easy installation, the base plate of the panel is pre-punched with 4 wall mounting holes.

Manufacturer: Zing, Manufacturer Part Number: 7373 Lockout Stations store and organize locks and tags. Stations contents include: (42) # 7030 1.5" Padlocks, (6) #7046 3" Padlocks (1) # 7619 1" Hasp, (1) # 7620 1.5" Hasp, (2) #7343 10-pack Tags. The station measures 21.5" H x 23"W. An unstocked board is also available, see part # 7355.

Manufacturer: Zing, Manufacturer Part Number: 6068 Zing& 6068 SDS compliance kit prominently stores important safety information. The kit consists of a white powder-coated steel rack and a durable binder for storing safety data sheets. SDS Wire Rack prominently stores safety information. Ideal for storage of SDS binders, or any safety procedures which require use near a job site. The wire rack is made in the USA from high-quality recycled steel, and measures 9"H x 14"W x 4.5"D. Recycled materials support sustainability initiatives and LEED credits. Mounting hardware is included. ZING SDS Binder stores important safety and training documents and supports compliance with OSHA's GHS/Hazard Communication requirements. The binder is made in the USA from recycled plastic, and measures 12"H x 10.75"W x 1.5"D. The heavy-duty plastic construction is durable, chemical-resistant, and easy to clean. The binder includes a 1.5" ring assembly, which holds up to 300 sheets.

Manufacturer: Zing, Manufacturer Part Number: 7689 Station includes a rigid plastic high visibility backboard with durable powder coated steel binder holder and one 1.5" SDS binder. Mounting hardware included. 20" X 14" X .125"

Manufacturer: Zing, Manufacturer Part Number: 7423 72 lb. Solid Tire Rubber Base: Will Not Tip In Strong Winds, Does Not Need Sand or Water, and Requires No Maintenance! Zing's Signpost Base holds parking, traffic, and policy signs firmly in place. The base is made in the USA from recycled tire rubber, and supports sustainability initiatives and LEED credits. The recycled rubber construction is weather-proof and virtually maintenance free. The base will not rust, crack, chip, crumble, or corrode, and the aerodynamic design is resistant to strong winds. Features: ¥ 72 lb. aerodynamic design withstands strong winds and severe weather. No sand or water required. ¥ Promotes safety and minimizes liability & damage in vehicle or pedestrian incidents. ¥ The base will not rust, chip, crack, crumble, corrode, or need repainting. ¥ Easy to install. ¥ Can be tipped and rolled to new locations. ¥ Made from 100% post-consumer recycled tire rubber. ¥ Limited lifetime warranty. Specifications: ¥ 18" width x 14" height. ¥ 72 lbs. Under the 75 lb. OSHA occupational lifting limit. ¥ Round holes support posts with a 2-3/8" diameter. ¥ Supports any sign up to 24" diameter. ¥ Made in the USA. ¥ Patents pending.

Manufacturer: Zing, Manufacturer Part Number: 7425 72 lb. Solid Tire Rubber Base: Will Not Tip In Strong Winds, Does Not Need Sand or Water, and Requires No Maintenance! Zing's Signpost Base holds parking, traffic, and policy signs firmly in place. The base is made in the USA from recycled tire rubber, and supports sustainability initiatives and LEED credits. The recycled rubber construction is weather-proof and virtually maintenance free. The base will not rust, crack, chip, crumble, or corrode, and the aerodynamic design is resistant to strong winds. Features: ¥ 72 lb. aerodynamic design withstands strong winds and severe weather. No sand or water required. ¥ Promotes safety and minimizes liability & damage in vehicle or pedestrian incidents. ¥ The base will not rust, chip, crack, crumble, corrode, or need repainting. ¥ Easy to install. ¥ Can be tipped and rolled to new locations. ¥ Made from 100% post-consumer recycled tire rubber. ¥ Limited lifetime warranty. Specifications: ¥ 18" width x 14" height. ¥ 72 lbs. Under the 75 lb. OSHA occupational lifting limit. ¥ Square holes support posts 1-3/4" wide. ¥ Supports any sign up to 24" diameter. ¥ Made in the USA. ¥ Patents pending.

Manufacturer: Zing, Manufacturer Part Number: 7440 The Sign Base Weight attaches to our Sign Base for added stability. Recommended for high-wind areas, or for supporting large traffic signs. The Sign Base Weight is made in the USA from 100% post-consumer recycled tire rubber. ¥ 23" Wide x 6" Tall, recessed center for the RubberForm Sign Base to sit in ¥ Added 75 pounds to our 72-pound Sign Base ¥ For high-wind areas and larger traffic signs ¥ 100% Post-Consumer Recycled Tire Rubber

Manufacturer: Zing, Manufacturer Part Number: 7447 72 lb. Solid Tire Rubber Base: Will Not Tip In Strong Winds, Does Not Need Sand or Water, and Requires No Maintenance! Zing's Signpost Base holds parking, traffic, and policy signs firmly in place. The base is made in the USA from recycled tire rubber, and supports sustainability initiatives and LEED credits. The recycled rubber construction is weather-proof and virtually maintenance free. The base will not rust, crack, chip, crumble, or corrode, and the aerodynamic design is resistant to strong winds. Zing& galvanized steel signposts are sturdy, durable, and rust-proof. The posts measure 5" H x 1-3/4" W. All four sides feature 3/8" diameter mounting holes spaced 1" apart along the center of the post, which allows customers to adjust the height of the sign. Two signs can be mounted on opposite sides of the same post. Base Features: ¥ 72 lb. aerodynamic design withstands strong winds and severe weather. No sand or water required. ¥ Promotes safety and minimizes liability & damage in vehicle or pedestrian incidents. ¥ The base will not rust, chip, crack, crumble, corrode, or need repainting. ¥ Easy to install. ¥ Can be tipped and rolled to new locations. ¥ Made from 100% post-consumer recycled tire rubber. ¥ Limited lifetime warranty.

Manufacturer: Zing, Manufacturer Part Number: 7463 Zing Sign Kit Bundle, "Visitor Parking," features a recycled aluminum sign, a galvanized steel signpost, and a recycled rubber sign base. Zing Traffic and Parking Signs are made in the USA from recycled aluminum, and feature 3M Engineer Grade Prismatic reflective sheeting Zing's Signpost Base holds parking, traffic, and policy signs firmly in place. The base is made in the USA from recycled tire rubber, and supports sustainability initiatives and LEED credits. The recycled rubber construction is weather-proof and virtually maintenance free. The base will not rust, crack, chip, crumble, or corrode, and the aerodynamic design is resistant to strong winds. No sand or water is required! The 72 lb. base can be easily tipped and rolled to new locations when necessary. Zing's Galvanized Steel Signposts are sturdy, durable, and rust-proof. The posts measure 5" H x 1-3/4" W. All four sides feature 3/8" diameter mounting holes spaced 1" apart along the center of the post, which allows customers to adjust the height of the sign. Two signs can be mounted on opposite sides of the same post.

Manufacturer: Zing, Manufacturer Part Number: 7461 Zing Sign Kit Bundle, "No Parking Any Time," features a recycled aluminum sign, a galvanized steel signpost, and a recycled rubber sign base. Zing Traffic and Parking Signs are made in the USA from recycled aluminum, and feature 3M Engineer Grade Prismatic reflective sheeting Zing's Signpost Base holds parking, traffic, and policy signs firmly in place. The base is made in the USA from recycled tire rubber, and supports sustainability initiatives and LEED credits. The recycled rubber construction is weather-proof and virtually maintenance free. The base will not rust, crack, chip, crumble, or corrode, and the aerodynamic design is resistant to strong winds. No sand or water is required! The 72 lb. base can be easily tipped and rolled to new locations when necessary. Zing's Galvanized Steel Signposts are sturdy, durable, and rust-proof. The posts measure 5" H x 1-3/4" W. All four sides feature 3/8" diameter mounting holes spaced 1" apart along the center of the post, which allows customers to adjust the height of the sign. Two signs can be mounted on opposite sides of the same post.

Manufacturer: Zing, Manufacturer Part Number: 7455 Zing Sign Kit Bundle, "Handicapped Reserved Parking, Van Accessible," features a recycled aluminum sign, a galvanized steel signpost, and a recycled rubber sign base. Zing Traffic and Parking Signs are made in the USA from recycled aluminum, and feature 3M Engineer Grade Prismatic reflective sheeting Zing's Signpost Base holds parking, traffic, and policy signs firmly in place. The base is made in the USA from recycled tire rubber, and supports sustainability initiatives and LEED credits. The recycled rubber construction is weather-proof and virtually maintenance free. The base will not rust, crack, chip, crumble, or corrode, and the aerodynamic design is resistant to strong winds. No sand or water is required! The 72 lb. base can be easily tipped and rolled to new locations when necessary. Zing's Galvanized Steel Signposts are sturdy, durable, and rust-proof. The posts measure 5" H x 1-3/4" W. All four sides feature 3/8" diameter mounting holes spaced 1" apart along the center of the post, which allows customers to adjust the height of the sign. Two signs can be mounted on opposite sides of the same post.

Manufacturer: Zing, Manufacturer Part Number: 7454 Zing Sign Kit Bundle, "Handicapped Reserved Parking," features a recycled aluminum sign, a galvanized steel signpost, and a recycled rubber sign base. Zing Traffic and Parking Signs are made in the USA from recycled aluminum, and feature 3M Engineer Grade Prismatic reflective sheeting Zing's Signpost Base holds parking, traffic, and policy signs firmly in place. The base is made in the USA from recycled tire rubber, and supports sustainability initiatives and LEED credits. The recycled rubber construction is weather-proof and virtually maintenance free. The base will not rust, crack, chip, crumble, or corrode, and the aerodynamic design is resistant to strong winds. No sand or water is required! The 72 lb. base can be easily tipped and rolled to new locations when necessary. Zing's Galvanized Steel Signposts are sturdy, durable, and rust-proof. The posts measure 5" H x 1-3/4" W. All four sides feature 3/8" diameter mounting holes spaced 1" apart along the center of the post, which allows customers to adjust the height of the sign. Two signs can be mounted on opposite sides of the same post.

Manufacturer: Zing, Manufacturer Part Number: 7453 Zing Sign Kit Bundle, "Handicapped Parking," features a recycled aluminum sign, a galvanized steel signpost, and a recycled rubber sign base. Zing Traffic and Parking Signs are made in the USA from recycled aluminum, and feature 3M Engineer Grade Prismatic reflective sheeting Zing's Signpost Base holds parking, traffic, and policy signs firmly in place. The base is made in the USA from recycled tire rubber, and supports sustainability initiatives and LEED credits. The recycled rubber construction is weather-proof and virtually maintenance free. The base will not rust, crack, chip, crumble, or corrode, and the aerodynamic design is resistant to strong winds. No sand or water is required! The 72 lb. base can be easily tipped and rolled to new locations when necessary. Zing's Galvanized Steel Signposts are sturdy, durable, and rust-proof. The posts measure 5" H x 1-3/4" W. All four sides feature 3/8" diameter mounting holes spaced 1" apart along the center of the post, which allows customers to adjust the height of the sign. Two signs can be mounted on opposite sides of the same post.