Newest Products

Manufacturer: Wesco, Manufacturer Part Number: 272416• 47 1/4" turning radius. • Deck height from floor: 12.375". • Finger tip variable speed controller with forward and reverse modes. Illuminated battery status indicator. • Key lock and emergency stop. • Motor: 370 watts. • Maximum climbing incline: 8º . • (2) 12 V 40 A.H. batteries and charger included. • Charge time: 7-8hr. • Continuous run time: 6 hr. • Motor controller: Curtis 110 amp. • Front wheels: 10" pneumatic. • Rear swivel polyurethane casters: 5" x 2". • Reverse direction safety beeper and reduced speed in reverse for added safety. • Full perimeter bumper helps prevent wall damage. • Rear panel grid helps keep cargo in place. • Durable white powder coat finish with black rubber deck mat. • 43" handle height. • Steel thickness 2.5 mm.

Manufacturer: Wesco, Manufacturer Part Number: 272415• 47 1/4" turning radius. • Deck height from floor: 12.375". • Finger tip variable speed controller with forward and reverse modes. Illuminated battery status indicator. • Key lock and emergency stop. • Motor: 370 watts. • Maximum climbing incline: 8º . • (2) 12 V 40 A.H. batteries and charger included. • Charge time: 7-8hr. • Continuous run time: 6 hr. • Motor controller: Curtis 110 amp. • Front wheels: 10" pneumatic. • Rear swivel polyurethane casters: 5" x 2". • Reverse direction safety beeper and reduced speed in reverse for added safety. • Full perimeter bumper helps prevent wall damage. • Rear panel grid helps keep cargo in place. • Durable white powder coat finish with black rubber deck mat. • 43" handle height. • Steel thickness 2.5 mm.

Manufacturer: Wesco, Manufacturer Part Number: 272413• 47 1/4" turning radius. • Deck height from floor: 12.375". • Finger tip variable speed controller with forward and reverse modes. Illuminated battery status indicator. • Key lock and emergency stop. • Motor: 370 watts. • Maximum climbing incline: 8º . • (2) 12 V 40 A.H. batteries and charger included. • Charge time: 7-8hr. • Continuous run time: 6 hr. • Motor controller: Curtis 110 amp. • Front wheels: 10" pneumatic. • Rear swivel polyurethane casters: 5" x 2". • Reverse direction safety beeper and reduced speed in reverse for added safety. • Full perimeter bumper helps prevent wall damage. • Rear panel grid helps keep cargo in place. • Durable white powder coat finish with black rubber deck mat. • 43" handle height. • Steel thickness 2.5 mm.

Manufacturer: Wesco, Manufacturer Part Number: 272414• 47 1/4" turning radius. • Deck height from floor: 12.375". • Finger tip variable speed controller with forward and reverse modes. Illuminated battery status indicator. • Key lock and emergency stop. • Motor: 370 watts. • Maximum climbing incline: 8º . • (2) 12 V 40 A.H. batteries and charger included. • Charge time: 7-8hr. • Continuous run time: 6 hr. • Motor controller: Curtis 110 amp. • Front wheels: 10" pneumatic. • Rear swivel polyurethane casters: 5" x 2". • Reverse direction safety beeper and reduced speed in reverse for added safety. • Full perimeter bumper helps prevent wall damage. • Rear panel grid helps keep cargo in place. • Durable white powder coat finish with black rubber deck mat. • 43" handle height. • Steel thickness 2.5 mm.

Manufacturer: Wesco, Manufacturer Part Number: 272746• US Patent No. 6,808,357. • Available in 16" or 21" widths. • 7" non-marking moldon polyurethane steering wheel. • 3" non-marking moldon polyurethane load wheels. • 7.75" raised height. • 3" lowered height. • 6" wide forks.

Manufacturer: Wesco, Manufacturer Part Number: 272861• 5 year pump warranty. • Patented design. • Fastest / quickest lift on the market. • Just step on the pedal. No pumping. Lifts to 4'5". • All the same features and dimensions as our standard deluxe models. • Normal pump operation when load exceeds 300 lbs. • 7" non-marking moldon polyurethane steering wheel. • 3" non-marking moldon polyurethane load wheels.

Manufacturer: Vestil, Manufacturer Part Number: SPN-3-YL-HR-BR-POA poly step stool is a great asset for on the go or in a permanent setting. A lightweight design with front and side cutout handles, allow the user to easily transfer the stool to a preferred spot. The taped step surfaces ensure safe footing while traversing up and down the steps. Includes bolt on back rail, handrail, and casters. The hand rails height allows the unit to be pushed or pulled into the desired position, minimizing bending and twisting by the user. Steps can be nested to minimize footprint when not in use. -Anti-slip step surface -Low density polyethylene construction -Easily maneuvered with attached casters -Colored yellow for added safety and awareness

Manufacturer: Vestil, Manufacturer Part Number: SPN-3-YL-HR-BRA poly step stool is a great asset for on the go or in a permanent setting. A lightweight design with front and side cutout handles, allow the user to easily transfer the stool to a preferred spot. The taped step surfaces ensure safe footing while traversing up and down the steps. Side and back hand rails give the user stability while climbing up and down the steps. Steps can be nested to minimize footprint when not in use. -Anti-slip step surface -Low density polyethylene construction -Lightweight for simple handling -Colored yellow for added safety and awareness

Manufacturer: Vestil, Manufacturer Part Number: SPN-2-YL-HR-BR-POA poly step stool is a great asset for on the go or in a permanent setting. A lightweight design with front and side cutout handles, allow the user to easily transfer the stool to a preferred spot. The taped step surfaces ensure safe footing while traversing up and down the steps. Includes bolt on back rail, handrail, and casters. The hand rails height allows the unit to be pushed or pulled into the desired position, minimizing bending and twisting by the user. Steps can be nested to minimize footprint when not in use. -Anti-slip step surface -Low density polyethylene construction -Easily maneuvered with attached casters -Colored yellow for added safety and awareness

Manufacturer: Vestil, Manufacturer Part Number: SPN-2-YL-HR-BRA poly step stool is a great asset for on the go or in a permanent setting. A lightweight design with front and side cutout handles, allow the user to easily transfer the stool to a preferred spot. The taped step surfaces ensure safe footing while traversing up and down the steps. Side and back hand rails give the user stability while climbing up and down the steps. Steps can be nested to minimize footprint when not in use. -Anti-slip step surface -Low density polyethylene construction -Lightweight for simple handling -Colored yellow for added safety and awareness

Manufacturer: Vestil, Manufacturer Part Number: SSL-2086-10When stacks of metal sheeting need to be raised, look for the steel sheet lifter. As safety is always the highest priority, this lifter limits the amount of interaction between personnel and heavy sheets or plates. This provides not of only a level of safety, but also workplace efficiency. When it comes to this design's capabilities, it is fully able to lift sheets of varying sizes, from large and small to narrow and wide. Material must be stacked horizontally for proper handling. -10,000 lbs. capacity -Adjustable widths ranging from 20" to 86" -Built of steel with a durable liquid paint finish -Self-locking geared handle

Manufacturer: Vestil, Manufacturer Part Number: HPRO-R-48-36-2A High Profile machinery guard protects racks, building walls, expensive equipment, and a variety of other applications. This guard is detachable from the single socket base plate, allowing for quick installation and removal. Each guard is built of powder coated steel, while the base plate has a galvanized finish. Four (4) pre-drilled mounting holes in each plate. -Single rail design -5" x 5" base plate -Black and yellow safety stripes for added visibility -1/4" base plate thickness

Manufacturer: Vestil, Manufacturer Part Number: HPRO-R-48-24-2A High Profile machinery guard protects racks, building walls, expensive equipment, and a variety of other applications. This guard is detachable from the single socket base plate, allowing for quick installation and removal. Each guard is built of powder coated steel, while the base plate has a galvanized finish. Four (4) pre-drilled mounting holes in each plate. -Single rail design -5" x 5" base plate -Black and yellow safety stripes for added visibility -1/4" base plate thickness

Manufacturer: Vestil, Manufacturer Part Number: HPRO-R-36-36-2A High Profile machinery guard protects racks, building walls, expensive equipment, and a variety of other applications. This guard is detachable from the single socket base plate, allowing for quick installation and removal. Each guard is built of powder coated steel, while the base plate has a galvanized finish. Four (4) pre-drilled mounting holes in each plate. -Single rail design -5" x 5" base plate -Black and yellow safety stripes for added visibility -1/4" base plate thickness

Manufacturer: Vestil, Manufacturer Part Number: HPRO-R-36-24-2A High Profile machinery guard protects racks, building walls, expensive equipment, and a variety of other applications. This guard is detachable from the single socket base plate, allowing for quick installation and removal. Each guard is built of powder coated steel, while the base plate has a galvanized finish. Four (4) pre-drilled mounting holes in each plate. -Single rail design -5" x 5" base plate -Black and yellow safety stripes for added visibility -1/4" base plate thickness

Manufacturer: Vestil, Manufacturer Part Number: BOL-R-48-2When objects and personnel need to be protected look for a safety bollard! These bollards can be used in a variety of settings, while also enduring harsh outside conditions. This bollard is detachable from the single socket base plate, allowing for quick installation and removal. Built of steel with a powder coat finish for baked in added toughness. Included cap is made of plastic. -Bollard cap is removable -5" x 5" base plate -1/4" base plate thickness -Constructed from schedule 10 steel

Manufacturer: Vestil, Manufacturer Part Number: BOL-R-42-2When objects and personnel need to be protected look for a safety bollard! These bollards can be used in a variety of settings, while also enduring harsh outside conditions. This bollard is detachable from the single socket base plate, allowing for quick installation and removal. Built of steel with a powder coat finish for baked in added toughness. Included cap is made of plastic. -Bollard cap is removable -5" x 5" base plate -1/4" base plate thickness -Constructed from schedule 10 steel

Manufacturer: Vestil, Manufacturer Part Number: BOL-R-36-2When objects and personnel need to be protected look for a safety bollard! These bollards can be used in a variety of settings, while also enduring harsh outside conditions. This bollard is detachable from the single socket base plate, allowing for quick installation and removal. Built of steel with a powder coat finish for baked in added toughness. Included cap is made of plastic. -Bollard cap is removable -5" x 5" base plate -1/4" base plate thickness -Constructed from schedule 10 steel

Manufacturer: Vestil, Manufacturer Part Number: BOL-R-24-2When objects and personnel need to be protected look for a safety bollard! These bollards can be used in a variety of settings, while also enduring harsh outside conditions. This bollard is detachable from the single socket base plate, allowing for quick installation and removal. Built of steel with a powder coat finish for baked in added toughness. Included cap is made of plastic. -Bollard cap is removable -5" x 5" base plate -1/4" base plate thickness -Constructed from schedule 10 steel

Manufacturer: Haws, Manufacturer Part Number: 9007The Haws® Model 9007 is a versatile, portable eyewash cart engineered for safety, durability, and convenience. Built with a strong 1-1/4" diameter carbon steel frame and finished with a black powder coating, this stand securely supports the Haws 7500 and 7501 gravity-fed eyewash units—as well as most comparable competitor models. Ideal for use in locations without plumbed water, the Model 9007 helps facilities meet ANSI and OSHA emergency eyewash requirements. An integrated catch tank collects water during activation or routine testing, simplifying cleanup and reducing slip hazards. Four smooth-rolling casters—two of which lock—allow for easy relocation on flat surfaces while ensuring stability during use. The portable eyewash cart assembles quickly, making it a practical solution for warehouses, construction sites, and other temporary or remote work environments. Eyewash and J-Bracket not included.

Manufacturer: Haws, Manufacturer Part Number: 9006The Haws® Model 9006 is a durable, portable eyewash stand designed to support the Haws 7500 and 7501 gravity-fed units—as well as most comparable competitor models. Built from rugged 1-1/4" diameter carbon steel tubing and finished with a black powder-coated surface, this stand delivers a stable, corrosion-resistant solution for environments without plumbed water access. Perfect for remote or temporary workspaces, the Model 9006 helps ensure ANSI-compliant emergency eyewash availability in accordance with OSHA standards. Protective plastic feet included for added stability and support. Eyewash and J-Bracket not included.

Manufacturer: Durham, Manufacturer Part Number: 620-95-D830-3PKG 30 Tiers Cell Phone Cabinet • All-welded construction, 20 gauge steel • All tiers/doors can be secured with a padlock • The back of the locker has holes for the cable to pass through to charge your cell phone batteries • Has holes in its structure to be fixed to the floor or wall • All doors can be personalized using a name tag label • Ships fully assembled • Gray, Gloss powder coat finish

Manufacturer: Durham, Manufacturer Part Number: 620-95-D830 10 Tiers Cell Phone Cabinet • All-welded construction, 20 gauge steel • All tiers/doors can be secured with a padlock • The back of the locker has holes for the cable to pass through to charge your cell phone batteries • Has holes in its structure to be fixed to the floor or wall • All doors can be personalized using a name tag label • Ships fully assembled • Gray, Gloss powder coat finish

Manufacturer: Durham, Manufacturer Part Number: 2502CS-12S-95 Charging Cabinets • Heavy-duty, all-welded 16-gauge steel construction • Keyed handle with 3-point locking system • Reinforced hinges prevent door sagging or warping • (2) smooth-glide drawers with 250 lb. capacity • (6) shelves lips up to contain items; (6) lips down for flat, stackable storage—offering versatile organization • (2) 16-outlet power strips • (4) 3” x 1-13/16” phenolic swivel casters with brakes (*mobile units only) Overall Capacity of 2,800 lbs evenly distributed • Diamond-punched panels allow airflow and visibility • Clear, impact-resistant doors open 180° for easy access • Ships fully assembled • Durable, textured, gray, powder coat finish