New products

Manufacturer: Vestil, Manufacturer Part Number: FRS-6-12Insert the loop at the tip of the fork and slide it up at a 45 ° angle. Then, lay it down over the existing forks. Load pallets into the rear of trailer conveniently and easily. Practical for pushing pallets two or three deep into a trailer.

Manufacturer: Vestil, Manufacturer Part Number: FTA-P-SWCIn warehouses stretch wrap is seemingly always required. But, rolls of wrap can often be elusive; gone the second you need it. That's where the stretch wrap caddy comes in! The stretch wrap caddy is built to hold rolls of wrap when your hands are otherwise in use, like driving a fork truck. The caddy can be attached to the exterior of the fork truck in any position that fits the users' preference and ready for use in a matter of minutes. So stop wasting precious time looking for the roll of stretch wrap and just remember it's in the last place you left it; in the stretch wrap caddy! -Built of durable plastic -Pre-drilled mounting holes -Mounting screws included -High tack adhesive included

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-12-DCUniform Capacity (pounds): 1,200, Accepts: 55–gallon steel drum, Chain (feet): 15 , Drum Rotation (degrees): 360, Fork Pocket Height (in.): 2–1/2, Fork Pocket Width (in.): 7–1/2, DC Voltage: 24 – This Fork Truck Drum Carrier/Rotator allows you to easily transport and rotate steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Carrier/Rotator is provided with a chain to allow the drum to be rotated from the fork truck operator's seat. This DC powered unit includes battery, on–board charger, and hand held control on a long coil cord. Drum must be full to rotate at rated capacity.

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-20Capacity: 2,000 lbs., 10 crank turns per 90° rotation, 15' Chain – Fork Truck Drum Carrier / Rotator – This product allows you to easily transport and rotate 55 gallons steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Each unit is provided with a 15 foot long chain to allow the drum to be rotated up to 360° from the fork truck operator's seat. Fork pockets measure 7" wide by 2" high usable. Safety chain is used to secure unit to fork truck. Bung Nut Wrench included for opening and closing drums.

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-8-DCCapacity: 800 lbs. – Fork Truck Drum Carrier / Rotator – This product allows you to easily transport and rotate 55–gallon steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Fork pockets measure 7" wide by 2" high usable. Safety chain is used to secure unit to fork truck. A bung nut wrench is also included for opening and closing drums. 12V DC Powered Operation. Drum must be full to rotate at rated capacity.

Manufacturer: Vestil, Manufacturer Part Number: SCRAPE-1Blade Width: 12", Overall Size (W x L x H): 13" x 36" x 8", Usable Fork Opening (W x H): 9–1/4" x 3–1/4" – Fork Truck Floor Scraper – Great new product designed to turn your fork truck into a floor scraper. Works well in paint and finish rooms for removing over sprayed paint from floors. Simply slide fork into opening and attach safety restraint to carriage for safety. Features hardened scraping blade for long life and durability. Blade is mounted in pivot assembly to allow it to raise up with contact against a crack or rise in the floor. Heavy–duty welded steel construction. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: FC-29Usable Size (W x H): 7–1/2" x 2–1/2", Casters: 3" to 1" Swivel, Capacity: 2000 lbs. – Fork Truck Fork Caddy – Transport fork truck forks easily and safely. This caddy allows the user to easily remove and install forks onto a fork truck. This is usually a dangerous and time consuming process, but our fork caddy makes this a breeze. After transporting the fork to the fork truck, rotate the handle 90°. Slide the fork onto the mast. The Fork Caddy has easy–grip handles and rolls smoothly on two swivel casters. A locking screw secures the fork into the caddy to keep it in place while transporting. The comfort–grip handle pivots up to 180° to allow for easier mobility. The Fork Caddy is lightweight and small enough for easy storage as well.

Manufacturer: Vestil, Manufacturer Part Number: FRK-LVLDesigned to aid the fork lift driver in determining when the forks are level. Unit reduces the risk of damaging or piercing product when removing it from pallet racking. Fasten the steel leveler to the mast of the fork lift. While tilting the forks to the desired angle, the fork leveler will tilt as well, showing that the forks are not currently in a horizontal position. When forks are moved back into a safe level angle, the leveler will be perfectly horizontally.

Manufacturer: Vestil, Manufacturer Part Number: SPB-P-72Unique design attaches to fork truck forks. Pass through fork tubes keep weight back towards fork truck mast. Locking pins secure snow plow to forks for safety. The steel construction has a brightly colored baked-in powder-coated finish for added toughness and clear visibility. The attached sides contain the snow in a direct manner for time and safety efficiency. MFG Part# SPB-P-72

Manufacturer: Zing, Manufacturer Part Number: 7675 Forklift lockout kits provide a comprehensive lockout solution for forklift and other electric or propane-powered vehicle lockout. The kit includes devices, locks, tags, and warning stickers in a durable, portable fabric pouch. Kit contents include: Multi-functional Forklift/Plug/Valve Lockout Device (part #7294) 1 Lockout Padlock (part # 7030) 1 Lockout Hasp (part # 7620) Safety Tags, "Danger Do Not Use," 10/pk (part # 7500) Safety Tags, Forklift Inspection, 10/pk (part # 7501) Forklift Warning Labels, 3 Points Contact, 10/pk (part # 7506) Cable Ties (part # 7130) Medium Fabric Bag (part # 7309)

Manufacturer: Vestil, Manufacturer Part Number : VPS-60A forklift broom is a perfect fit to the maintenance and construction facilities. The polypropylene construction provides a strong and durable unit throughout both indoor and outdoor use. Rows of brush sections can be taken out for a more preferred setup. The long length provides a time saving, efficient unit that will cover an abundance of surface area with less travel time. The simple forklift attachment allows the unit to be used with very short setup time. For best use, utilize the attached fork pockets and connect the safety chains. Once in place, the unit can be maneuvered to gather debris that has been left throughout the workplace. -Steel frame construction with built in fork pockets for maneuverability -Polypropylene brushes for strength and sustainability -Durable for indoor or outdoor use -Long broom length for time efficiency

Manufacturer: Vestil, Manufacturer Part Number : VPS-72A forklift broom is a perfect fit to the maintenance and construction facilities. The polypropylene construction provides a strong and durable unit throughout both indoor and outdoor use. Rows of brush sections can be taken out for a more preferred setup. The long length provides a time saving, efficient unit that will cover an abundance of surface area with less travel time. The simple forklift attachment allows the unit to be used with very short setup time. For best use, utilize the attached fork pockets and connect the safety chains. Once in place, the unit can be maneuvered to gather debris that has been left throughout the workplace. -Steel frame construction with built in fork pockets for maneuverability -Polypropylene brushes for strength and sustainability -Durable for indoor or outdoor use -Long broom length for time efficiency

Manufacturer: Vestil, Manufacturer Part Number: FCB-818Overall Size: 8"W x 18"H – Forklift Carriage Bumper – Protect loads from potential damage with our Fork Truck Carriage Bumper. Simply bolt to forklift carriage with included hardware.

Manufacturer: Morse, Manufacturer Part Number: 285AUse Morse model 285A Forklift–Karrier to lift, transport, rotate and pour a heavy drum. You control the drum tilting right from the driver's seat of your fork truck with the 20' chain loop. Turn your drum 360 degrees in either direction. It is simple to mount on the forks without using any tools. No power connections or truck modifications are required. Fork pocket openings are 24.5" apart, and 2.5" high by 6.5" wide. Handles a 55–gallon steel drum. Capacity: 800 Lb. full drum, 500 Lb. half full drum. Accepts Diameter Adaptors (sold separately) to handle a smaller drum. CAPACITY: 800 Lb.

Manufacturer: Zing, Manufacturer Part Number: 7505 Forklift safety labels clearly communicate critical safety information. The tags are made from durable adhesive and measure 3"H x 3"W. Sold 10/pack.

Manufacturer: Zing, Manufacturer Part Number: 7506 Forklift safety labels clearly communicate critical safety information. The tags are made from durable adhesive and measure 3"H x 3"W. Sold 10/pack.

Manufacturer: Vestil, Manufacturer Part Number: FLB-D-10A Forklift Lifting Beam is the perfect asset for maneuvering and transferring heavy objects. The centrally located shackle between two fork pockets allow the user to safely attach to the unit and transport to the desired location. Hooks are also attached to the outside of the unit for a more secure lifting experience. The strong steel construction with a bright finish enables high visibility from both near and far. Secure to the fork truck by means of a long safety restraint and screw clamps. MFG Part# FLB-D-10

Manufacturer: Zing, Manufacturer Part Number: 7390 The Forklift Lockout Kit effectively locks out forklifts for routine maintenance and repair. The lockout device also locks out LP tanks. Contents include: (1) 7294 Universal Forklift/Plug/Valve Lockout Device (1) 700 Series Lockout Padlock (4) 7356E Equipment Lockout Tags (4) 7130 Cable Ties

Manufacturer: Zing, Manufacturer Part Number: 7677 Forklift lockout kits provide a comprehensive lockout solution for forklift and other electric or propane-powered vehicle lockout. The kit includes devices, locks, tags, and warning stickers in a durable, portable fabric pouch. Kit contents include: Multi-functional Forklift/Plug/Valve Lockout Device (part #7294) 2 Lockout Padlocks (part # 7030) Lockout Hasp, 1" Jaw Diameter (part # 7619) Lockout Hasp, 1.5" Jaw Diameter (part # 7620) Safety Tags, "Danger Do Not Use," 10/pk (part # 7500) Safety Tags, Forklift Inspection, 10/pk (part # 7501) Forklift Warning Labels, 3 Points Contact, 10/pk (part # 7506) Cable Ties (part # 7130) Medium Fabric Bag (part # 7309)

Manufacturer: Vestil, Manufacturer Part Number: FRA-4-238For use with 4in wide forks. Includes two 72in long safety chains with quick clasp and a 2?in reel support bar (48in long). Distance between forks not to exceed length of support bar. MFG Part# FRA-4-238

Having a fully stocked forklift spill kit readily available is essential for maintaining workplace safety and ensuring rapid response to accidental spills. Designed for quick access, this forklift spill kit includes high-quality absorbents and personal protective equipment (PPE) to protect your workers and environment from hazardous material incidents.Key Features Durable Construction: Weather-resistant vinyl bag with a secure box-lid closure safeguards absorbents from external elements. Comprehensive Absorbents: Includes HazMat absorbents capable of managing spills of hazardous or unknown liquids. Easy Mounting: Equipped with hanging straps that attach securely to the seat or back beam of forklifts and other mobile equipment. Reusable Design: The spill kit is designed for multiple uses, allowing for easy replenishment of absorbents and replacement of PPE as needed. What’s Included Absorbent Pads: Effectively soak up chemical and oil spills, preventing environmental contamination. Personal Protective Equipment (PPE): Includes gloves and goggles to ensure worker safety during spill response. Disposal Bags: Facilitate the safe containment and removal of spilled materials. Mounting Straps: Ensure the kit remains securely attached to your forklift for quick access during emergencies. Benefits Enhanced Safety: Provides immediate access to spill management tools, reducing response time and mitigating risks. Regulatory Compliance: Meets relevant safety standards and regulations, ensuring your operations remain compliant. Cost-Effective: Reusable and easily replenishable components offer long-term savings on spill management. Ideal for sectors such as manufacturing, construction, and chemical handling, this forklift spill kit is a vital component of your spill response strategy. Ensure your workplace remains safe and compliant by equipping your forklifts with reliable spill management solutions.

Manufacturer: Morse, Manufacturer Part Number: 285A-BPMorse model 285A–BP Forklift–Karrier with built–in battery–powered tilt control decreases effort and increases productivity. Fully invert your drum in 15 seconds. The two–button pendant reaches the fork truck operator to turn the drum forward and back. A battery and charger are provided. Handle a 55–gallon steel drum. Options to handle plastic or fiber drum are available. Capacity: 1200 Lb. BATTERY POWER TILT, CAPACITY: 1200 Lb.SPECIFICATIONS39" x 41" x 28" - 355 lbs.

This industrial order picking truck is designed to enhance warehouse efficiency and safety, making it the perfect solution for high-capacity pick loads and compatibility with order pickers. Built for demanding operations, this forkliftable order picking truck combines intelligent design with robust performance to ensure smooth maneuverability and secure attachment during heavy-duty tasks.Key Features Three-shelf design offering ample storage with 19″ shelf clearance. Two full-width fork pockets on 24″ centers for balanced load distribution. A 1-1/2″ steel grab bar that provides an easy, secure connection to order pickers. Dual caster system with 2 fixed and 2 swivel 6″ polyurethane casters for effortless movement—even when carrying a full load of 3600 lbs. Compact 48″ length for seamless navigation through narrow aisles. Overall height of 68″, optimized for efficient order picking operations. Technical Details Manufacturer: Little Giant (Visit Little Giant Collection) Manufacturer Part Number: T3-3048-6PYFP60 Ideal for those seeking forkliftable order picking truck or industrial order picking truck solutions. This product not only boosts productivity by streamlining order picking processes, but also delivers exceptional durability in demanding industrial environments. Its innovative features promote ergonomic safety, making it a top choice for warehousing, manufacturing, and construction operations. Explore more efficient material handling options in our Stockpicker Trucks collection.

Manufacturer: Clift Industries, Manufacturer Part Number: 6900-005Provides safe remediation of the black, green–blue and white molds from a variety of surfaces. A powerful blend of botanical blends and microbes that digest and destroy a variety of molds. Controls odors produced by mold. Eliminates the uses of hazardous chemicals such as benzal ammonium chloride, chloride dioxide and glutaraldehyde which have the toxicity similar to methylene chloride. Digests mycotoxins produced by molds. Penetrates surfaces and provides a mold growth barrier that prevents further mold growth. Apply by fogging, atomizing or spraying. One gallon covers 1,000 square feet. tem # (Pack) Size Dilution Neutral pH, non–hazardous, biobased, environmentally–safe and biodegradable. Comes in a 5–gallon bucket. (This is for the Formaldehyde Eater only. It does not include items in our kit.)