New products

Manufacturer: Keltech, Manufacturer Part Number: SN1443/480DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS560 lbs.1 unit1.5 - 40 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN1443/600DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS560 lbs.1 unit1.5 - 40 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: CLE183/480DThe Keltech tankless CLE series emergency eyewash heaters are the perfect solution for workers at risk from chemical injury. Custom designed to meet your needs, Keltech emergency eyewash heaters perform when needed and quickly provide an unlimited supply of warm water. Keltech's water heating systems reach the required ANSI Z358.1 2004 standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds. With a Keltech tankless CLE emergency eyewash water heater, you will be able to provide injured employees with a consistent flow of tepid water, up to 10 gallons per minute for 15 minutes. Keltech's CLE series emergency eyewash heaters are built upon the proven technology found in our large and light industrial water heaters. The CLE series heaters activate at .75 GPM and can handle water flow up to 10 GPM. Keltech tankless emergency eyewash heating solutions range in size and capacity from 18kW to 25kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages. Precision engineered for optimal performance, Keltech emergency eyewash water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH CLE SERIES EMERGENCY EYEWASH HEATERS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's emergency eyewash heaters quickly reach the required ANSI standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds and provide injured employees with a consistent flow of tepid water — up to 10 GPM — for 15 minutes. Redundant Control and Safety Features Every CLE emergency eyewash heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and splash proof NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The CLE series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's CLE series emergency eyewash heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install Anywhere CLE emergency eyewash heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech CLE series emergency eyewash heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless emergency eyewash heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. NEMA 4 enclosures are constructed for either indoor or outdoor use and provide a measure of protection for the emergency eyewash heater from the elements. Save Energy from Day One The Keltech tankless emergency eyewash heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Units are applicable eyewash applications only and are not required for a combination shower unit Built with redundant safeties and anti–scald feature to meet ANSI tepid water requirements Complies with ANSI Z358.1 standards Available in 480V 3–phase delta and 600V 3–phase delta configurations With proper sizing, one heater can supply multiple eyewash stations Can be supplied with an eyewash station if specified CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS155 lbs.1 unit0.75 - 8 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: CLE183/600DThe Keltech tankless CLE series emergency eyewash heaters are the perfect solution for workers at risk from chemical injury. Custom designed to meet your needs, Keltech emergency eyewash heaters perform when needed and quickly provide an unlimited supply of warm water. Keltech's water heating systems reach the required ANSI Z358.1 2004 standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds. With a Keltech tankless CLE emergency eyewash water heater, you will be able to provide injured employees with a consistent flow of tepid water, up to 10 gallons per minute for 15 minutes. Keltech's CLE series emergency eyewash heaters are built upon the proven technology found in our large and light industrial water heaters. The CLE series heaters activate at .75 GPM and can handle water flow up to 10 GPM. Keltech tankless emergency eyewash heating solutions range in size and capacity from 18kW to 25kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages. Precision engineered for optimal performance, Keltech emergency eyewash water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH CLE SERIES EMERGENCY EYEWASH HEATERS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's emergency eyewash heaters quickly reach the required ANSI standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds and provide injured employees with a consistent flow of tepid water — up to 10 GPM — for 15 minutes. Redundant Control and Safety Features Every CLE emergency eyewash heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and splash proof NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The CLE series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's CLE series emergency eyewash heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install Anywhere CLE emergency eyewash heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech CLE series emergency eyewash heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless emergency eyewash heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. NEMA 4 enclosures are constructed for either indoor or outdoor use and provide a measure of protection for the emergency eyewash heater from the elements. Save Energy from Day One The Keltech tankless emergency eyewash heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Units are applicable eyewash applications only and are not required for a combination shower unit Built with redundant safeties and anti–scald feature to meet ANSI tepid water requirements Complies with ANSI Z358.1 standards Available in 480V 3–phase delta and 600V 3–phase delta configurations With proper sizing, one heater can supply multiple eyewash stations Can be supplied with an eyewash station if specified CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS155 lbs.1 unit0.75 - 8 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: CLE253/480DThe Keltech tankless CLE series emergency eyewash heaters are the perfect solution for workers at risk from chemical injury. Custom designed to meet your needs, Keltech emergency eyewash heaters perform when needed and quickly provide an unlimited supply of warm water. Keltech's water heating systems reach the required ANSI Z358.1 2004 standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds. With a Keltech tankless CLE emergency eyewash water heater, you will be able to provide injured employees with a consistent flow of tepid water, up to 10 gallons per minute for 15 minutes. Keltech's CLE series emergency eyewash heaters are built upon the proven technology found in our large and light industrial water heaters. The CLE series heaters activate at .75 GPM and can handle water flow up to 10 GPM. Keltech tankless emergency eyewash heating solutions range in size and capacity from 18kW to 25kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages. Precision engineered for optimal performance, Keltech emergency eyewash water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH CLE SERIES EMERGENCY EYEWASH HEATERS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's emergency eyewash heaters quickly reach the required ANSI standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds and provide injured employees with a consistent flow of tepid water — up to 10 GPM — for 15 minutes. Redundant Control and Safety Features Every CLE emergency eyewash heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and splash proof NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The CLE series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's CLE series emergency eyewash heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install Anywhere CLE emergency eyewash heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech CLE series emergency eyewash heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless emergency eyewash heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. NEMA 4 enclosures are constructed for either indoor or outdoor use and provide a measure of protection for the emergency eyewash heater from the elements. Save Energy from Day One The Keltech tankless emergency eyewash heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Units are applicable eyewash applications only and are not required for a combination shower unit Built with redundant safeties and anti–scald feature to meet ANSI tepid water requirements Complies with ANSI Z358.1 standards Available in 480V 3–phase delta and 600V 3–phase delta configurations With proper sizing, one heater can supply multiple eyewash stations Can be supplied with an eyewash station if specified CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS170 lbs.1 unit0.75 - 10 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN363/480DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS445 lbs.1 unit1.5 - 25 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: CLE253/600DThe Keltech tankless CLE series emergency eyewash heaters are the perfect solution for workers at risk from chemical injury. Custom designed to meet your needs, Keltech emergency eyewash heaters perform when needed and quickly provide an unlimited supply of warm water. Keltech's water heating systems reach the required ANSI Z358.1 2004 standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds. With a Keltech tankless CLE emergency eyewash water heater, you will be able to provide injured employees with a consistent flow of tepid water, up to 10 gallons per minute for 15 minutes. Keltech's CLE series emergency eyewash heaters are built upon the proven technology found in our large and light industrial water heaters. The CLE series heaters activate at .75 GPM and can handle water flow up to 10 GPM. Keltech tankless emergency eyewash heating solutions range in size and capacity from 18kW to 25kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages. Precision engineered for optimal performance, Keltech emergency eyewash water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH CLE SERIES EMERGENCY EYEWASH HEATERS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's emergency eyewash heaters quickly reach the required ANSI standards for tepid water temperatures (60°F to 85°F) in as little as 20 to 30 seconds and provide injured employees with a consistent flow of tepid water — up to 10 GPM — for 15 minutes. Redundant Control and Safety Features Every CLE emergency eyewash heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and splash proof NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The CLE series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's CLE series emergency eyewash heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install Anywhere CLE emergency eyewash heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech CLE series emergency eyewash heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless emergency eyewash heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. NEMA 4 enclosures are constructed for either indoor or outdoor use and provide a measure of protection for the emergency eyewash heater from the elements. Save Energy from Day One The Keltech tankless emergency eyewash heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Units are applicable eyewash applications only and are not required for a combination shower unit Built with redundant safeties and anti–scald feature to meet ANSI tepid water requirements Complies with ANSI Z358.1 standards Available in 480V 3–phase delta and 600V 3–phase delta configurations With proper sizing, one heater can supply multiple eyewash stations Can be supplied with an eyewash station if specified CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS170 lbs.1 unit0.75 - 10 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN363/600DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS445 lbs.1 unit1.5 - 25 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN543/480DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS445 lbs.1 unit1.5 - 25 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN543/600DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS445 lbs.1 unit1.5 - 25 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN633/480DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS495 lbs.1 unit1.5 - 25 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN633/600DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS495 lbs.1 unit1.5 - 25 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN723/480DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS535 lbs.1 unit1.5 - 30 GPM Flow Rate

Manufacturer: Keltech, Manufacturer Part Number: SN723/600DTEPID WATER SOLUTIONS Keltech SN series of safety shower systems provide portability that anti–scald valves and fixed plumbing cannot match. Our tankless water heaters can be mounted almost anywhere. Just add water and power. The Keltech SN series shower heater can be paired with any high quality commercial safety shower apparatus. Keltech tankless safety shower heaters can be mounted near your existing shower and/or eyewash facilities. SIZING RANGES TO MEET YOUR SPECS Keltech tankless safety shower heating solutions range in size and capacity from 36kW to 144kW. Standard voltage is 480V 3–phase delta or 600V 3–phase delta at various amperages with water flow up to 40 GPM with activation beginning as low as 1.5 GPM. PRECISION ENGINEERED FOR OPTIMAL PERFORMANCE Keltech safety shower water heating solutions are built to last and feature quality control systems and premium materials like copper and brass to meet your demanding specs and to increase the life of the heater. KELTECH SN SERIES SAFETY SHOWER HEATERS AND SYSTEMS FEATURES AND BENEFITS: Meet the New ANSI Z358.1 2004 Standards Keltech's safety shower heaters quickly reach the required ANSI standards for tepid water temperatures in as little as 20 to 30 seconds. Keltech tankless water heaters provide injured employees with a constant flow of tepid water at 20 to 30 gallons per minute for an ANSI mandated 15 minutes — or longer if needed. Unlike tanks, Keltech tankless water heaters can provide continuous tepid water for multiple incidents with no recovery time. Redundant Control and Safety Features Every SN safety shower heater that Keltech custom designs includes a patented temperature control system and multiple safety features like internal fusing, digital temperature control, Incoloy 800 sheathed heating elements to eliminate the "tingle" effect, an externally mounted emergency stop button, and NEMA 4 water tight enclosures. Safety only circuits monitor for over temperature conditions and ensure individual chambers do not exceed ANSI standards for tepid water temperature. The SN series is ETL/cETL approved and conforms to UL and CSA standards. Minimal Pressure Drop Means No Latent Heat Issues The large internal passageways engineered into every Keltech's SN series safety shower heater minimize pressure drop. If the water flow changes drastically, you will not have to be concerned with scalding. Our patented system guarantees there will be no large temperature swing. Quality Materials and Components Provide Reliable Performance and Minimal Maintenance All Keltech tankless water heating solutions are built to last and feature rugged industrial components constructed from high quality copper and brass tested to 300 PSI. Our heating elements are Incoloy sheathed to provide longer life. Maintenance is minimal, falling within the normal ANSI requirements. One of the best features of a Keltech tankless water heating system is never having to open its enclosure door. Easy to Install SN safety shower heaters come standard with NEMA enclosures and are easy to install: Just add water and power. All you need is access to one electrical connection and a cold water line. In fact, Keltech SN series safety shower heaters are wired to 480 Delta and 600 Delta — they do not require a neutral. This flexibility allows the tankless safety shower heaters and systems to be mounted near your existing shower and/or emergency eyewash facilities. Keltech's safety shower heaters are also compact and do not require large floor space: the SN series can be wall mounted almost anywhere in the vertical position. Keltech's freestanding shower heating units include a sturdy floor stand kit. Save Energy from Day One The Keltech tankless safety shower heaters and systems are energy efficient and minimize utility cost. They perform on–demand requiring power and water only when needed. There is no need to heat a 300 gallon boiler 24 hours a day, 365 days a year. There's also no need for expensive re–circulation loops. That saves your organization money and keeps the safety of your employees and technicians first. Patented safeties to ensure water temperatures remain within the ANSI tepid water standards Anti–scald feature standard Capable of supplying tepid water to combination shower and eyewash heater without overheating No mixing valves required SN series can be fitted with a shower or a complete shower skid system Each skid system is a complete package designed to meet your temperature range requirements and safety shower criteria With proper sizing, one heater can be used to supply multiple showers Many standard features are available but can also be customized for your site location's requirements Available in 400V 3–phase delta and 600V 3–phase delta configurations Complies with ANSI Z358.1 standards CONTACT US FOR MORE INFORMATION AND OPTIONSSPECIFICATIONS535 lbs.1 unit1.5 - 30 GPM Flow Rate

Experience the durability and functionality of the Three Sided Low Truck 18x36 2K 6PH, proudly manufactured by Durham. Tailored for industrial material handling, this sturdy 18x36 truck features premium 14 gauge steel construction and a modern gray finish that ensures both longevity and ease of use. Whether you require a dependable stock truck for day-to-day operations or a superior solution to upgrade your facility, this product stands out as an exceptional choice. Its tubular push handle boosts maneuverability while maintaining structural strength, making it the ideal option when purchasing three sided truck equipment.Key Specifications Overall Dimensions: 18 x 36 inches Material: 14 gauge steel construction Design: Three sided low truck layout for optimized storage and material movement Feature: Tubular push handle for enhanced ease of transport Finish: Durable gray coating Manufacturer Part Number: 3SLT-1836-2K-95 Why Choose This Product?Engineered with an emphasis on quality and operational efficiency, this 2K low truck easily meets the demands of industrial settings. Its thoughtful design simplifies material handling while offering a reliable solution that withstands heavy use. For additional products in this category, explore our 3 Sided Trucks or browse more offerings from Durham in our Durham collection.

Manufacturer: Durham, Manufacturer Part Number: 3SLT-1836-1.2K-9536 wide, 14 gauge, 3 sided stock truck, tubular push handle, gray Mfg Part#: 3SLT-1836-1.2K-95

Manufacturer: Durham, Manufacturer Part Number: 3SLT-2448-2K-9548 wide, 14 gauge, 3 sided stock truck, tubular push handle, gray Mfg Part#: 3SLT-2448-2K-95

Experience the robust performance of this Durham-manufactured three-sided low truck, model 3SLT244812K9, expertly engineered for demanding industrial material handling applications. This versatile 24 x 48 low truck is designed with durability and efficiency in mind, making it the ideal choice when purchasing a three-sided low truck for your heavy-duty operations.Key Features Model: 3SLT244812K9 Dimensions: 24" x 48" Weight Capacity: 1,200 lbs Construction: 14-gauge steel for exceptional strength Finish: Durable, textured powder coat gray finish Design: Three-sided stock truck featuring a tubular push handle for easy maneuvering Why Choose This Low Truck?Designed to boost material transport efficiency in warehouses, manufacturing plants, and other industrial settings, this three-sided low truck ensures reliable performance under heavy loads. Its streamlined design and robust construction make it a smart investment for professionals seeking a dependable material handling solution.For more options in heavy-duty equipment, explore our Material Handling collection or browse our specialty 3 Sided Trucks.

This rugged THREE SIDED LOW TRUCK 30X48 2K, model 3SLT3048-2K-95, is manufactured by Durham for efficient material handling in demanding industrial environments. Constructed with precision from 14-gauge steel and finished in a durable textured gray powder coat, this truck ensures both reliability and safety in your operations.Specifications Capacity: 2000 lbs Dimensions: 30″ x 48″ with an overall height of 41-1/4″ Material: 14-gauge steel construction Finish: Durable, textured gray powder coat Design: Three-sided structure featuring a tubular push handle for enhanced maneuverability BenefitsFully assembled for immediate use, this truck is built for smooth mobility and easy integration into any warehouse or industrial setting. Its versatile design makes it a perfect solution for a wide range of material handling applications, all while offering exceptional durability and efficiency. Explore more in our 3 Sided Trucks collection and discover additional material handling solutions in our Material Handling collection.

Manufacturer: Vestil, Manufacturer Part Number: FF-C-12The three speed Commercial Floor Fan has a rotary switch and a permanently lubricated motor. Meets OSHA standards and is UL listed. These floor fans do not have a totally enclosed motor. They should be used in clean and dry commercial application.

Manufacturer: Vestil, Manufacturer Part Number: FF-C-20The three speed Commercial Floor Fan has a rotary switch and a permanently lubricated motor. Meets OSHA standards and is UL listed. These floor fans do not have a totally enclosed motor. They should be used in clean and dry commercial application.

Manufacturer: Ex-Cell Kaiser, Manufacturer Part Number: RC-MTR-3-HCCLMetro Collection™ tapered recycling receptacle Three Stream unit in a Hammered Charcoal finish with platinum collars. Clean lines and quality construction merge to create a Recycling Receptacle that is as visually stunning as it is functional. Metro Collection™ Recycling Receptacles complement any décor, traditional or contemporary. ADA Compliant and constructed of fire-safe steel. Three (3) Rigid plastic 18-gallon capacity in each liner. Four heavy-duty feet keep the units slightly elevated to allow for air circulation and help restrict mold and mildew growth and unsightly discoloration of floor surfaces from “mop around” rings. Complete “Recycling Receptacle” includes three easy to remove, interchangeable steel tops; beveled Trash top, flat tops for Paper and Cans/Bottles. All top inserts are finished in a fingerprint proof, black texture EXL-Coat™ Powder coat finish. Silver transfer decal kit includes designations for: Trash, Waste, Compost, Recycle, Paper, Plastic, and Cans/Bottles plus plastic squeegee for quick and easy application. Optional caster kit (4-2” casters) available for superior maneuverability. Contains over 30% recycled material and 100% post-consumer recyclable.

Experience maximum versatility with the Throw & Snap Spill Berm—your reliable solution for rapid, effective spill containment. Designed with safety and ease of use in mind, this berm is engineered to meet the demanding needs of industrial and commercial spill management. Its innovative design lets you deploy it quickly, ensuring a rapid response to hazardous spills.Key Features• Versatile configuration: Use it as a drive-in/drive-out berm with floating sidewalls, a snap-up berm with fixed sidewalls, or a combination of both.• Self-deploying walls: Automatically rise with spilled fluids for immediate containment.• Heavy-duty 30 oz fabric: Resistant to water, hydrocarbons, and most chemicals.• No assembly required: Operate straight out of the box for hassle-free setup.• Easy maintenance: Easily emptied through 3/4″ drains.• Fully compliant: Meets U.S. spill containment regulations.Specifications• Dimensions: 14’ W x 66’ L x 1’ H• Capacity: 6,598 gal sump / 397 lbs weight capacity• Additional features: Includes a patch kit for on-the-spot repairs• Manufacturer: Berg CompanyFor installation, simply position the berm where it can maximize spill containment efficiency, whether laid flat or supported upright with interior rod supports. Custom sizes and colors are available upon request—contact us for additional options. Explore more innovative solutions in our Containment Berms collection or browse the Berg Company offerings for additional tools designed to meet your industrial safety needs.

Spill 911 Inc. presents an innovative solution with the Throw N' Go Berm—a quick-deploy, self-rising spill containment system engineered for both emergency spills and routine maintenance. Designed with a unique flat sidewall that unfolds easily, this berm allows entry and exit from any side while offering rapid setup with just two people in less than one minute.Key Benefits & Features• Fast and simple deployment with a no-assembly design• Unique self-rising walls that activate automatically when filled with fluid• Versatile flat sidewall ensures access from any direction• Meets EPA standards for hazardous waste containment (EPA 40 CFR 264.175) and for tank car operations (EPA 40 CFR 112.7[h])• Customization options available, including custom sizes, ground tarps, and track mats to suit various operational needs• Ideal for those looking to purchase a Throw N' Go Berm, whether in-store or onlineSpecifications• Dimensions: 10’ x 25’ x 1’• Manufacturer: Berg Company (Manufacturer Part Number: TNG 10X25X1)• Constructed from heavy-duty materials designed for both durability and ease of transportationFor more spill containment solutions, explore our Containment Berms collection. Learn more about our trusted products from Berg Company and enhance your facility’s safety and compliance today.