IBCs and Bulk Containment

Manufacturer: UltraTech, Manufacturer Part Number: 9573Grate, Polyethylene, 52" x 26" x 4", For Spill Deck Plus, Spill Pallet Plus and IBC Spill Pallets and Track Pans.

Manufacturer: UltraTech, Manufacturer Part Number: 9584The Rebar Fasteners and Protective Caps come in precut lengths that are designed exclusively for securing Side Track Pans to the rail. Comes complete with 20 Fasteners and Caps.SPECIFICATIONS30 lbs.20 fasteners and 20 caps2' L

Manufacturer: UltraTech, Manufacturer Part Number: 9576Capture Hazardous Spills From Railroad Tanker Cars. Ultra–TrackPans have been designed to provide spill containment at railroad sidings and locomotive maintenance facilities. Available in virtually any length, Ultra–TrackPans may be used to collect incidental spills and drips OR to capture and channel off significant spills caused by defective equipment or a major overflow. Center Track Pans fit between the rails while Side Track Pans fit on either side of the rails, providing complete spill coverage and containment. All pans are connected "end to end" with bulkhead fittings, allowing spills to flow from one pan to the next. Containment capacity is increased as the spill travels from TrackPan to TrackPan. Unlike carbon steel track pans, Ultra–TrackPans will not rust or corrode. Their polyethylene construction features a UV inhibitor that resists the degrading effects of the sun. These lightweight TrackPans can be easily installed without heavy lifting equipment. Minimal tools and labor are required. Track Pan Grates allow spills to flow below to the Track Pans while providing a level surface for walking or performing maintenance and repairs. Track Pan Covers are designed to work with the Track Pan Grates to shelter the Track Pans from rain and other elements. The Polyethylene Covers are left in place until the railcar(s) arrive to be off–loaded or loaded. Lightweight covers mechanically lock into the polyethylene grates and will not blow off in windy conditions. Pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily. Prevent Costly Cleanup and Regulatory Fines Modular Design – Center and Side Pans are 53" long; containment areas can be conveniently assembled to any length desired All–Polyethylene Construction – Rugged TrackPans withstand harsh chemicals and are designed to function in temperatures ranging from –40°F to +140°F Economical and easy to install Meets New York State Chemical Bulk Storage Regulation Section 599.17C – Secondary Containment for Transfer Stations SPECIFICATIONS19 gal. Sump Capacity - 60 lbs.1 side track pan, 1 bulkhead fitting, 1 piece treated lumber, 2 gaskets, 1 grate53.5" L x 27.5" W x 6" H

Manufacturer: UltraTech, Manufacturer Part Number: 9571All Ultra-Track Pans come with grates as part of the design/integrity for walking on or setting up drive over points. Personnel do not have to walk in spilled product in pans due to grating in every pan, reducing liability

Manufacturer: UltraTech, Manufacturer Part Number: 2832Containment Sump 1000: With 2" Drain, 1,100 gallons: Secondary Containment for 1000 Gallon Tanks. 1–piece molded polyethylene design – will not rust or corrode. Nestable design saves freight and minimizes storage space. 118 x 132 x 2. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 2800Complete Containment For 275 Gallon Oval Tanks – Indoors Or Outdoors! Eliminate costly spills while storing fuels, oils and other hazardous liquids. Rugged, all–polyethylene construction will not rust or corrode. Meets EPA Container Storage Regulation 40 CFR 264.175.Use with optional Ultra–Self Bailer (Part # 9935) for outdoor containment – Self Bailer allows clean stormwater to passively drain from sump while capturing hydrocarbons. Helps comply with NPDES, 40 CFR 122.26 (1999).

Manufacturer: UltraTech, Manufacturer Part Number: 2830Containment Sump 1000: No Drain, Black: Secondary Containment for 1000 Gallon Tanks. 1–piece molded polyethylene design – will not rust or corrode. Nestable design saves freight and minimizes storage space. 94 x 108 x 2. A discount is available for purchases of 10 or more spill containment tanks. Call contractor at 317–867–2911 for details.

Manufacturer: UltraTech, Manufacturer Part Number: 9572Replacement Grate for UltraTrack Pans with Stormwater Feature – Right Grate.

Manufacturer: UltraTech, Manufacturer Part Number: 9630The Cost Effective Solution! This is the ONLY low–profile, polyethylene spill pallet strong enough to handle fully loaded IBCs. The 75–gallon sump keeps floors free from drips and small spills – helping to eliminate OSHA slip hazards. Large 52" x 52" usable deck space accommodates all sizes and shapes of IBCs as well as four 55–gallon drums. Versatile design can be used with Drums or IBCs. Forkliftable on all four sides Large decking handles most IBCs Perfect for catching incidental leaks and drips In addition to IBCs, it will accommodate up to four 55–gallon drums Resists most chemicals Low–Profile design for ease of loading/unloading 100% Polyethylene containment area will not rust or corrode (Meets 40 CFR 264.175 requirements only when used with Drums and not IBCs) SPECIFICATIONS9,000 lbs. Load Bearing Capacity, 75 gal. Sump Capacity - 140 lbs.1 unit62" L x 62" W x 8.75" H

Looking to purchase an IBC spill pallet that meets strict regulatory standards and offers exceptional durability? Our Ultra-Tech IBC Steel Spill Pallet is a rugged spill containment solution built for industrial and commercial use, delivering enhanced safety and reliability compared to polyethylene options.OverviewThe Ultra-Tech IBC Steel Spill Pallet is engineered specifically for the secure storage of IBCs and large containers holding flammable liquids. Made from heavy-duty 14-gauge galvanized steel, this pallet provides outstanding resistance to extreme heat, fire, and chemical exposure while fully adhering to EPA and SPCC regulations. Its design helps prevent hazardous spills, ensuring a safer work environment.Key Features Material: Constructed with 14-gauge galvanized steel Capacity: Contains up to 370 gallons of spilled liquid Load: Supports a uniformly distributed load of up to 5650 lbs Ease of Handling: Designed for forklift access from all sides Maintenance: Features a removable two-piece grating for easy cleaning Benefits Superior Safety: A non-melting steel design that significantly reduces fire risks compared to plastic pallets. Durability: Robust construction withstands harsh chemical exposure and high temperatures. Regulatory Compliance: Meets EPA standards and SPCC Container Storage Regulation 40 CFR 264.175. Convenience: Forklift-compatible design ensures effortless maneuverability in busy industrial environments. Specifications Capacity: 370 gallons Load Capacity: 5650 lbs uniformly distributed Dimensions: 57" L x 57" W x 35" H For more advanced spill containment solutions, visit our UltraTech collection or explore our IBC Containment range.

Manufacturer: UltraTech, Manufacturer Part Number: 9559Track Pans – 3" Diameter Bulkhead fitting – For Below Grade Piping.

Manufacturer: UltraTech, Manufacturer Part Number: 1149Your Outside IBC Storage Solution! This is the ONLY all–polyethylene multiple IBC storage and containment unit designed specifically for outside use. Now you can safely and securely protect outside IBCs from the weather and unauthorized access. Upper roll–top doors and lower swing–out doors combine to allow easy and convenient access to IBCs Safely stores two IBC tanks with maximum dimensions of 52" x 52" x 61" each Lockable, all–polyethylene design will not rust or corrode Helps meet new Stormwater Management Regulations – NPDES, 40 CFR 122.26 Resists most chemicals Meets EPA Container Storage Regulation 40 CFR 264.175 SPECIFICATIONS16,000 lbs. (8,000 lbs. per side) Load Bearing Capacity, 535 gal. Sump Capacity - 967 lbs.1 unit128" L x 67" W x 96" H

Manufacturer: UltraTech, Manufacturer Part Number: 1145Save Money – Store Two IBC Tanks Side–by–Side Use for intermediate bulk containers (IBCs), drums, or other large vessels. (all materials stored must be chemically compatible)Available with optional Bucket Shelf for either or both sides – catches small leaks or spills during dispensing. Grates are easily removed for quick clean up. One continuous sump holds 535 gallons – meets EPA Containment and SPCC Regulations for two IBC tanks.

Manufacturer: UltraTech, Manufacturer Part Number: 1144 MULTIPLE IBC AND DRUM CONTAINMENT. One continuous sump holds 535 gallons Meets EPA Containment and SPCC Regulations for two IBC tanks Use for intermediate bulk containers, drums, tanks or other large vessels Resists most chemicals 100% Polyethylene containment area will not rust or corrode Grates are easily removed for quick clean–up Optional Bucket Shelf for either or both sides. Bucket Shelf allows easy dispensing into 5–gallon buckets or pails. Spills that exceed 3–gallons are channeled back into the sump through a bulkhead fitting. Bucket Shelf is 19.5" x 16" x 14.5" and will support up to 200 lbs. SPECIFICATIONS16,000 lbs. Load Bearing Capacity (8,000 lbs. per side), 535 gal. Sump Capacity - 352 lbs.1 unit124.5" L x 61.625" W x 22" H

Manufacturer: UltraTech, Manufacturer Part Number: 1142Save Money – Store Two IBC Tanks Side–by–Side Use for intermediate bulk containers (IBCs), drums, or other large vessels. (all materials stored must be chemically compatible)Available with optional Bucket Shelf for either or both sides – catches small leaks or spills during dispensing. Grates are easily removed for quick clean up. One continuous sump holds 535 gallons – meets EPA Containment and SPCC Regulations for two IBC tanks.

Manufacturer: UltraTech, Manufacturer Part Number: 1141Save Money – Store Two IBC Tanks Side–by–Side Use for intermediate bulk containers (IBCs), drums, or other large vessels. (all materials stored must be chemically compatible)Available with optional Bucket Shelf for either or both sides – catches small leaks or spills during dispensing. Grates are easily removed for quick clean up. One continuous sump holds 535 gallons – meets EPA Containment and SPCC Regulations for two IBC tanks.

Manufacturer: UltraTech, Manufacturer Part Number: 1140 MULTIPLE IBC AND DRUM CONTAINMENT. One continuous sump holds 535 gallons Meets EPA Containment and SPCC Regulations for two IBC tanks Use for intermediate bulk containers, drums, tanks or other large vessels Resists most chemicals 100% Polyethylene containment area will not rust or corrode Grates are easily removed for quick clean–up Optional Bucket Shelf for either or both sides. Bucket Shelf allows easy dispensing into 5–gallon buckets or pails. Spills that exceed 3–gallons are channeled back into the sump through a bulkhead fitting. Bucket Shelf is 19.5" x 16" x 14.5" and will support up to 200 lbs. SPECIFICATIONS16,000 lbs. Load Bearing Capacity (8,000 lbs. per side), 535 gal. Sump Capacity - 352 lbs.1 unit124.5" L x 61.625" W x 22" H

Manufacturer: UltraTech, Manufacturer Part Number: 2810 Our Ultra–275 Containment Sump PullOver Cover keeps rainwater out of the Ultra–275 Containment Sump, yet allows easy access to the sump. SPECIFICATIONS11 lbs.1 cover

Manufacturer: UltraTech, Manufacturer Part Number: 1118 You will need to purchase one (1) UT–1118–0001, Assembly Kit, with each Ultra–Modular IBC SpillPallet order. The order size does not matter – you will just need one (1) UT–1118–0001 per order. The Assembly kit is reusable for assembling any number of units and includes a hole saw, arbor and set of two (2) tightening tools. SPECIFICATIONS4 lbs.1 kitincludes hole saw, arbor, set of two (2) tightening tools

Manufacturer: UltraTech, Manufacturer Part Number: 1148Your Outside IBC Storage Solution! This is the ONLY all–polyethylene multiple IBC storage and containment unit designed specifically for outside use. Now you can safely and securely protect outside IBCs from the weather and unauthorized access. Upper roll–top doors and lower swing–out doors combine to allow easy and convenient access to IBCs Safely stores two IBC tanks with maximum dimensions of 52" x 52" x 61" each Lockable, all–polyethylene design will not rust or corrode Helps meet new Stormwater Management Regulations – NPDES, 40 CFR 122.26 Resists most chemicals Meets EPA Container Storage Regulation 40 CFR 264.175 SPECIFICATIONS16,000 lbs. (8,000 lbs. per side) Load Bearing Capacity, 535 gal. Sump Capacity - 967 lbs.1 unit128" L x 67" W x 96" H

The ISCP-1 spill containment pallet is engineered to safeguard against IBC spills while providing an effective drainage solution for quick and safe spill management. This IBC spill pallet with drain is built for durability and ease-of-use, making it an essential tool for industrial facilities focused on safety and environmental compliance.Key Features 100% polyethylene construction ensures chemical resistance and long-lasting durability Integrated drain system efficiently manages spills and prevents accumulation Fork pockets for secure lifting and easy positioning Designed to meet strict safety and environmental regulations Versatile solution for reliable IBC spill containment Safety & Compliance BenefitsManufactured to comply with SPCC and EPC Container Storage Regulations, the ISCP-1 spill containment pallet not only prevents hazardous spills from spreading but also enhances workplace safety. This product delivers peace of mind, ensuring your facility stays compliant while reducing environmental risks. It’s the ideal choice for industries requiring robust spill prevention and containment solutions.Enhance your facility’s safety standards with the ISCP-1 spill containment pallet and experience dependable spill management. Discover more in our IBC Containment collection and make an informed purchase today.

Manufacturer: Vestil, Manufacturer Part Number: IBC-275Uniform Volume Capacity (gallons): 275, Valve Width (in.): 2, Fill Cap Diameter (in.): 6, Bung Diameter (in.): 2, Color Finish: White, Construction: High Density Polyethylene w/ Wire Frame – Intermediate Bulk Container, a space–saving storage container, is great for multi–trip applications. Designed for storage of both hazardous and nonhazardous contents. Easy to fill, stack and load. FDA compliant steel cage is hot–dipped galvanized. Pallet base is made from both steel and plastic. Includes inner storage tank made from white plastic with UV–blocking additive. Includes butterfly valve with Viton gasket and top fill cap. Complete unit is UN approved.

Designed to prevent spills and safeguard your facility, this Fuel Tank Containment system (Model OTC-275) is ideal for both indoor and outdoor use. Built for longevity, it securely contains fuels, oils, and other hazardous liquids, helping to minimize environmental and financial risks.Key Features• Load Capacity: 275 lbs• Made entirely from recycled polyethylene• Chemical resistant and non-corrosive for enduring performance• Optional Pull Over Cover available for extra protectionProduct Specifications• Dimensions: 84½″ (W) x 43¾″ (D) x 29″ (H) – Designed to fit a variety of fuel tank sizes• Engineered for industrial use, ensuring strong performance in demanding environments• Manufacturer: Vestil – Known for reliability and quality backed by industry expertiseSafety and Compliance• Provides effective spill control to reduce costly hazards• Complies with essential industrial safety standards• Offers corrosion resistance to help maintain a safe storage settingEnjoy worry-free fuel management with this all-inclusive containment solution designed for compliance and effortless maintenance. For additional spill protection solutions, check out our Tank Containment collection. Refer to the detailed installation guidelines and benefit from a setup that's both safe and efficient.

Manufacturer: Vestil, Manufacturer Part Number: IBC-330Uniform Volume Capacity (gallons): 330, Valve Width (in.): 2, Fill Cap Diameter (in.): 6, Bung Diameter (in.): 2, Color Finish: White, Construction: High Density Polyethylene w/ Wire Frame – Intermediate Bulk Container, a space–saving storage container, is great for multi–trip applications. Designed for storage of both hazardous and nonhazardous contents. Easy to fill, stack and load. FDA compliant steel cage is hot–dipped galvanized. Pallet base is made from both steel and plastic. Includes inner storage tank made from white plastic with UV–blocking additive. Includes butterfly valve with Viton gasket and top fill cap. Complete unit is UN approved.