All products Absorbents Material Handling PPE Safety
Compressor Start Relay-Water Cooler and Chiller
Haws Compressor Start Relay-Water Cooler and Chiller $27.35
Manufacturer: Haws, Manufacturer Part Number : HC116The Haws model HC116 is a compressor start relay for the 1200 series water cooler chiller compartment.
Filter 3000 Gal for Haws Water Cooler
Haws Filter 3000 Gal for Haws Water Cooler $117.43
Manufacturer: Haws, Manufacturer Part Number : 6428Model 6428 replacement filter is used with the Haws 1200 series water coolers. It is a carbon block filter cartridge with a service life of 1 year/3000-gallons (11356 L). Filter contains an onboard chip to store total gallon usage; this chip interfaces with an Electronic Lifecycle Control system to allow water flow only until the filter reaches its total gallon capacity. Tested and certified by CSA against NSF/ANSI Standard 42 for the reduction of chlorine (taste and odor) and against NSF/ANSI Standard 53 for the reduction of lead and cysts.
Wall Mounted Bottle Filler w/Drip Tray Drain
Haws Wall Mounted Bottle Filler w/Drip Tray Drain $1,172.80
Manufacturer: Haws, Manufacturer Part Number : 1922Model 1922 wall mounted bottle filler and drain shall include 100% lead-free waterways, satin stainless steel construction, 1 gpm (3.78 L) laminar flow, push-button operated stainless steel valve with front-accessible cartridge and flow adjustment, drip tray drain, and stainless steel back panels (order models 1920 and 6468 if panels are not required).Note***** This item requires a mounting plate for installation. Please purchase mounting plate SKU# 6700 or SKU# 6700R .*****
Haws Vandal Resistant Filtered Bottle Filling Station with Single ADA Drinking Fountain Non-Chilled Haws Vandal Resistant Filtered Bottle Filling Station with Single ADA Drinking Fountain Non-Chilled
Haws Haws Vandal Resistant Filtered Bottle Filling Station with Single ADA Drinking Fountain Non-Chilled $1,757.37
Manufacturer: Haws, Manufacturer Part Number: 1211SFVNModel 1211SFVN vandal resistant, filtered, wall-mounted non-chilled indoor wall-mount indoor unit with single ADA fountain design in 304 satin-finish stainless steel. Features include vandal-resistant stainless steel anti-rotational bubbler head, model 5874 solid bar stock steel push button, and scratch resistant LED-illuminated bottle filler. Energy-saving mode powers down unit and lights after 2 hours of inactivity; programmable for specific days of the week. Digital LED interface displays status and error codes. Bottle filler drains to waste and auto-purges after 24 hours of non-use. CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. FCC and CAN ICES - 3(A)/NMB-3(A). Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.Spec Sheet INSTALL DRAWING Parts Break Down O&M MANUAL WARRANTY
Haws Vandal Resistant Bottle Filling Station and single ADA Drinking Fountain Non-Chilled Non-Filtered Haws Vandal Resistant Bottle Filling Station and single ADA Drinking Fountain Non-Chilled Non-Filtered
Haws Haws Vandal Resistant Bottle Filling Station and single ADA Drinking Fountain Non-Chilled Non-Filtered $1,687.11
Manufacturer: Haws, Manufacturer Part Number: 1211SVNModel 1211SVN vandal resistant wall-mounted vandal resistant non-chilled/non-filtered indoor wall-mount indoor unit with single ADA fountain constructed of 304 satin-finish stainless steel. Features include vandal-resistant stainless steel anti-rotational bubbler head, model 5874 solid bar stock steel push button, and LED-illuminated bottle filler. Energy-saving mode powers down unit and lights after 2 hours of inactivity; programmable for specific days of the week. Digital LED interface displays status and error codes. Bottle filler drains to waste and auto-purges after 24 hours of non-use. CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. FCC and CAN ICES - 3(A)/NMB-3(A). Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.Spec Sheet INSTALL DRAWING Parts Break Down O&M MANUAL WARRANTY
Haws Vandal Resistant Bottle Filling Station and Hi-Lo ADA Drinking Fountain Non-Chilled Non-Filtered Haws Vandal Resistant Bottle Filling Station and Hi-Lo ADA Drinking Fountain Non-Chilled Non-Filtered
Haws Haws Vandal Resistant Bottle Filling Station and Hi-Lo ADA Drinking Fountain Non-Chilled Non-Filtered $2,202.86
Manufacturer: Haws, Manufacturer Part Number: 1212SVNModel 1212SVN vandal resistant wall-mounted vandal resistant non-chilled/non-filtered indoor wall-mount indoor unit with dual fountain design in 304 satin-finish stainless steel. Features include vandal-resistant stainless steel anti-rotational bubbler heads, model 5874 solid bar stock steel push button, and LED-illuminated bottle filler. Energy-saving mode powers down unit and lights after 2 hours of inactivity; programmable for specific days of the week. Digital LED interface displays status and error codes. Bottle filler drains to waste and auto-purges after 24 hours of non-use. CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. FCC and CAN ICES - 3(A)/NMB-3(A). Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.Spec Sheet INSTALL DRAWING Parts Break Down O&M MANUAL WARRANTY
Haws Vandal Resistant Filtered Bottle Filling Station and Hi-Lo ADA Drinking Fountain Non-Chilled Haws Vandal Resistant Filtered Bottle Filling Station and Hi-Lo ADA Drinking Fountain Non-Chilled
Haws Haws Vandal Resistant Filtered Bottle Filling Station and Hi-Lo ADA Drinking Fountain Non-Chilled $2,336.10
Manufacturer: Haws, Manufacturer Part Number: 1212SFVNModel 1212SFVN vandal resistant, filtered, wall-mounted non-chilled indoor wall-mount indoor unit with dual fountain design in 304 satin-finish stainless steel. Features include vandal-resistant stainless steel anti-rotational bubbler heads, model 5874 solid bar stock steel push button, and scratch resistant LED-illuminated bottle filler. Energy-saving mode powers down unit and lights after 2 hours of inactivity; programmable for specific days of the week. Digital LED interface displays status and error codes. Bottle filler drains to waste and auto-purges after 24 hours of non use. CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. FCC and CAN ICES - 3(A)/NMB-3(A). Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.Spec Sheet INSTALL DRAWING Parts Break Down O&M MANUAL WARRANTY
Haws Vandal Resistant Bottle Filling Station and Hi-Lo ADA Drinking Fountain Non-Filtered Chilled Haws Vandal Resistant Bottle Filling Station and Hi-Lo ADA Drinking Fountain Non-Filtered Chilled
Haws Haws Vandal Resistant Bottle Filling Station and Hi-Lo ADA Drinking Fountain Non-Filtered Chilled $2,395.32
Manufacturer: Haws, Manufacturer Part Number: 1211SVModel 1211SV vandal resistant, non-filtered, wall-mounted chilled indoor wall-mount indoor unit with single fountain design in 304 satin-finish stainless steel. Features include vandal-resistant stainless steel anti-rotational bubbler head, model 5874 solid bar stock steel push button, and scratch resistant LED-illuminated bottle filler. The 3000-gallon (11,356 L) filter with Electronic Lifecycle Control turns filter indicator light off when capacity is reached. Light will illuminate when new filter is installed. Energy-saving mode powers down unit and lights after 2 hours of inactivity; programmable for specific days of the week. Digital LED interface displays status and error codes. Bottle filler drains to waste and auto-purges after 24 hours of non-use. CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC and CAN ICES - 3(A)/NMB-3(A). Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.Spec Sheet INSTALL DRAWING Parts Break Down O&M MANUAL WARRANTY
Haws Vandal Resistant Filtered Bottle Filling Station with Single ADA Drinking Fountain Chilled Haws Vandal Resistant Filtered Bottle Filling Station with Single ADA Drinking Fountain Chilled
Haws Haws Vandal Resistant Filtered Bottle Filling Station with Single ADA Drinking Fountain Chilled $2,528.57
Manufacturer: Haws, Manufacturer Part Number: 1211SFVModel 1211SFV vandal resistant, filtered, wall-mounted chilled indoor wall-mount indoor unit with single ADA fountain design in 304 satin-finish stainless steel. Features include vandal-resistant stainless steel anti-rotational bubbler head, model 5874 solid bar stock steel push button, and scratch resistant LED-illuminated bottle filler. Energy-saving mode powers down unit and lights after 2 hours of inactivity; programmable for specific days of the week. Digital LED interface displays status and error codes. Bottle filler drains to waste and auto-purges after 24 hours of non-use. CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC and CAN ICES - 3(A)/NMB-3(A). Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty. Spec Sheet INSTALL DRAWING Parts Break Down O&M MANUAL WARRANTY
Haws Vandal Resistant Filtered Bottle Filling Station and Hi-Lo ADA Drinking Fountain Chilled Haws Vandal Resistant Filtered Bottle Filling Station and Hi-Lo ADA Drinking Fountain Chilled
Haws Haws Vandal Resistant Filtered Bottle Filling Station and Hi-Lo ADA Drinking Fountain Chilled $3,822.86
Manufacturer: Haws, Manufacturer Part Number: 1212SFVModel 1212SFV vandal resistant, filtered, wall-mounted chilled indoor wall-mount indoor unit with dual fountain design in 304 satin-finish stainless steel. Features include vandal-resistant stainless steel anti-rotational bubbler heads, model 5874 solid bar stock steel push button, and scratch resistant LED-illuminated bottle filler. The 3000-gallon (11,356 L) filter with Electronic Lifecycle Control turns filter indicator light off when capacity is reached. Energy-saving mode powers down unit and lights after 2 hours of inactivity; programmable for specific days of the week. Digital LED interface displays status and error codes. Bottle filler drains to waste and auto-purges after 24 hours of non use. CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC and CAN ICES - 3(A)/NMB-3(A). Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.Spec Sheet INSTALL DRAWING Parts Break Down O&M MANUAL WARRANTY
Haws Vandal Resistant Bottle Filling Station and Hi-Lo ADA Drinking Fountain Non-Filtered Chilled Haws Vandal Resistant Bottle Filling Station and Hi-Lo ADA Drinking Fountain Non-Filtered Chilled
Haws Haws Vandal Resistant Bottle Filling Station and Hi-Lo ADA Drinking Fountain Non-Filtered Chilled $3,590.65
Manufacturer: Haws, Manufacturer Part Number: 1212SVModel 1212SV vandal resistant, non-filtered, wall-mounted chilled indoor wall-mount indoor unit with dual fountain design in 304 satin-finish stainless steel. Features include vandal-resistant stainless steel anti-rotational bubbler heads, model 5874 solid bar stock steel push button, and scratch resistant LED-illuminated bottle filler. The 3000-gallon (11,356 L) filter with Electronic Lifecycle Control turns filter indicator light off when capacity is reached. Filter indicator light will illuminate again when new filter is installed. Energy-saving mode powers down unit and lights after 2 hours of inactivity; programmable for specific days of the week. Digital LED interface displays status and error codes. Bottle filler drains to waste and auto-purges after 24 hours of non-use. CSA certified to comply with NSF/ANSI/CAN 61: Q ≤ 1, NSF/ANSI/CAN 372, ASME A112.18.1/CSA B125.1, UL 399 and CSA C22.2 No. 120. ADA compliant to ICC A117.1, CSA B651, DOJ’s 2010 ADA Standards for Accessible Design when properly installed. ASHRAE 18 compliant chilling capacity of 8.0 gallon per hour of 50 degree drinking water, based on 80 degree inlet water and 90 degree ambient temperature. FCC and CAN ICES - 3(A)/NMB-3(A). Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine), and failure to heed these conditions may void warranty.Spec Sheet INSTALL DRAWING Parts Break Down O&M MANUAL WARRANTY
Thermostatic Mixing Valve
Haws Thermostatic Mixing Valve $1,860.00
Manufacturer: Haws, Manufacturer Part Number: 9202E Model 9202E Emergency Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied - ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate measurement.) -Optional recessed or surface mounted valve box available -A flow rate of 1 to 78 gpm (295 L) for better temperature control across the operating range -Lowest internal pressure drop for this class of valve (advantage where supply pressure is low) -Wax based thermostat technology for fast response time with proven highly reliable temperature control -Highest Cold Water Bypass flow rate in the industry (64% of rated tepid flow rate) -Brass valve design with internal check stops -Over-sized valve seats resist failures caused by foreign matter -A new and efficient shuttle design eliminates valve sticking -A custom funnel design improves temperature control at low flow rates -Outlet temperature is factory set to 85° F (29° C) -Tempered water: High temperature limit is factory set to 90° F (32° C) -Cold water by-pass valves are closed during normal operation, regardless of flow rate -For important installation information, please read Scald Warning. -CSA Listings: CSA certified per ASSE 1071, ANSI Z358.1 and applicable sections of CSA B125.3.
Thermostatic Mixing Valve
Haws Thermostatic Mixing Valve $2,496.62
Manufacturer: Haws, Manufacturer Part Number: 9201HModel 9201H, low-lead Emergency Valve (patent pending), thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. The valve contains a secondary high temperature limit valve to provide additional protection to the user in the event of main tempering valve malfunction. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied - ASSE 1071 standard recommends gauges be placed 5 to 8 feet downstream for the most accurate measurement.) -Optional recessed or surface mounted valve box available -A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range -AXION's superior design and technology provide a complete safety solution for increased victim comfort -Lowest internal pressure drop for this class of valve (advantage where supply pressure is low) -Wax based thermostat technology for fast response time with proven highly reliable temperature control Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate) -Low-lead brass valve design with internal check stops -Oversized valve seats resist failures caused by foreign matter -A new and efficient shuttle design eliminates valve sticking -A custom funnel design improves temperature control at low flow rates -Outlet temperature is factory set to 85° F (29° C) -Tempered water: High temperature limit is factory set to 87° F (30° C) -Cold water by-pass valves are closed during normal operation, regardless of flow rate -Listings: CSA certified per ASSE 1071, ANSI Z358.1, applicable sections of CSA B125.3, NSF/ANSI 372, NSF/ANSI 61-section 8, California Health and Safety Code 116875 (AB 1953).
Thermostatic Mixing Valve
Haws Thermostatic Mixing Valve $611.51
Manufacturer: Haws, Manufacturer Part Number: 9201EW Model 9201EW Emergency Valve thermostatically mixes hot and cold water to provide a safe fluid supply for a single emergency eye/face wash. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied - ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.) -A flow rate of 1 to 10 gpm (3.8 to 37.8 L) for better temperature control across the operating range -AXION's superior design and technology provide a complete safety solution for increased victim comfort. -Wax based thermostat technology for fast response time with proven highly reliable temperature control -Cold Water Bypass flow rate of 3.8 gpm (14.4 L) (When tested under conditions specified in ASSE 1071) -Brass valve design with supplied check valves -Over-sized valve seats resist failures caused by foreign matter -Efficient funnel design improves temperature control at low flow rates -Outlet temperature is factory set to 85° F (29° C). -Tempered water: High temperature limit is factory set to 90° F (32° C). -For important installation information, please read Scald Warning. -CSA Listings: CSA certified per ASSE 1071, ANSI/ISEA Z358.1, NSF/ANSI/CAN 372, and applicable sections of CSA B125.3.
Thermostatic Mixing Valve
Haws Thermostatic Mixing Valve $1,010.27
Manufacturer: Haws, Manufacturer Part Number: 9201EFE Model 9201EFE Emergency Thermostatic Mixing Valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied - ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.) -Optional recessed or surface mounted valve box available -A flow rate of 1 to 12 gpm (3.8 to 45.4 L) for better temperature control across the operating range -AXION's superior design and technology provide a complete safety solution for increased victim comfort -Lowest internal pressure drop for this class of valve (advantage where supply pressure is low) -Wax based thermostat technology for fast response time with proven highly reliable temperature control -Highest Cold Water Bypass flow rate in the industry (83% of rated tepid flow rate) -Brass valve design with internal check stops -Over-sized valve seats resist failures caused by foreign matter -A new and efficient shuttle design eliminates Thermostatic Mixing Valve sticking -A custom funnel design improves temperature control at low flow rates -Outlet temperature is factory set to 85° F (29° C) -Tempered water: High temperature limit is factory set to 90° F (32° C) -Cold water by-pass valves are closed during normal operation, regardless of flow rate -For important installation information, please read Scald Warning. -CSA Listings: CSA certified per ASSE 1071, ANSI/ISEA Z358.1 and applicable sections of CSA B125.3.
Thermostatic Mixing Valve
Haws Thermostatic Mixing Valve $1,426.58
Manufacturer: Haws, Manufacturer Part Number: 9201E Model 9201E emergency mixing valve (patent pending) thermostatically mixes hot and cold water to provide a safe fluid supply for emergency showers and eyewash equipment. Additionally, to ensure a fail-safe water supply for emergency shower and eyewash stations, a series of cold water by-pass valves open in the event of hot water pressure loss. (No gauges supplied - ASSE 1071 standard recommends gauges be placed 5 to 8 feet (1.52 to 2.44 m) downstream for the most accurate temperature measurement.) -Optional recessed or surface mounted valve box available -A flow rate of 1 to 31 gpm (3.8 to 117.3 L) for better temperature control across the operating range -AXION's superior design and technology provide a complete safety solution for increased victim comfort -Lowest internal pressure drop for this class of valve (advantage where supply pressure is low) -Wax based thermostat technology for fast response time with proven highly reliable temperature control -Highest Cold Water Bypass flow rate in the industry (65% of rated tepid flow rate) -Brass valve design with internal check stops -Over-sized valve seats resist failures caused by foreign matter -A new and efficient shuttle design eliminates valve sticking -A custom funnel design improves temperature control at low flow rates -Outlet temperature is factory set to 85° F (29° C) -Tempered water: High temperature limit is factory set to 90° F (32° C) -Cold water by-pass valves are closed during normal operation, regardless of flow rate -For important installation information, please read Scald Warning. -CSA Listings: CSA certified per ASSE 1071, ANSI Z358.1, and applicable sections of CSA B125.3.
Emergency Body Spray Kit
Haws Emergency Body Spray Kit $540.82
Manufacturer: Haws, Manufacturer Part Number: 8901RFKModel 8901RFK body spray features a ABS plastic head, stay-open squeeze lever valve, 8 foot (243.8 cm) hose and installation kit. Kit includes clamp hook-up, tee clips and fitting for retrofit installation on most combination shower and eyewash units. Supply: 1/2" IPS. In order to comply with state codes the use of a vacuum breaker is required with all hand held body spray units (Haws offers model SP212) Per ANSI/ISEA Z358.1, "Hand held drench hoses provide support for emergency shower and eyewash units, but shall not replace them."
Emergency Body Spray
Haws Emergency Body Spray $343.33
Manufacturer: Haws, Manufacturer Part Number: 8901BModel 8901B drench hose can be easily activated with integral squeeze lever, providing a maximum coverage area for the body with its soft flowing streams of water. Unit is conveniently mounted using wall clips keeping the emergency equipment held firmly against the wall. -Dust cover allows for the spray head to stay protected from debris when not in use -Requires minimal maintenance and is equipped with test card to record weekly testing -8 foot (243.8 cm) swivel hose provides an extended coverage area to further optimize the irrigation process -In order to comply with state codes the use of a vacuum breaker is required with all hand held body spray units (Haws offers model SP212) -Per ANSI/ISEA Z358.1, "Hand held drench hoses provide support for emergency shower and eyewash units, but shall not replace them."
Barrier-Free Wall-Mounted Shower and Recessed Eye/Face Wash w/Drain Pan
Haws Barrier-Free Wall-Mounted Shower and Recessed Eye/Face Wash w/Drain Pan $3,676.36
Manufacturer: Haws, Manufacturer Part Number: 8356WCWModel 8356WCW barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. Emergency combination unit is equipped with a stainless steel drain pan, so when the irrigation process begins, the unit is draining waste properly. -Wall mount combination strobe light and alarm horn special available -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Hydrodynamic designed stainless steel wall mounted showerhead -Easy access exterior mounted in-line strainer -One piece drain tray catches waste fluid during eyewash use -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish -Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Barrier-Free Ceiling-Mounted Shower and Surface-Mounted Eye/Face Wash w/Drain Pan
Haws Barrier-Free Ceiling-Mounted Shower and Surface-Mounted Eye/Face Wash w/Drain Pan $3,981.54
Manufacturer: Haws, Manufacturer Part Number: 8356WCSM Model 8356WCSM wheelchair accessible surface mounted combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Emergency combination unit is equipped with a stainless steel drain pan, so when the irrigation process begins, the unit is draining waste properly. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Wall mount combination strobe light and alarm horn special available -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Perfect for mounting on block or solid walls which cannot be cut into -Easy access exterior mounted in-line strainer -One piece drain tray catches waste fluid during eyewash use -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish -Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Barrier-Free Ceiling-Mounted Shower and Recessed Eye/Face Wash w/Drain Pan and Daylight Drain
Haws Barrier-Free Ceiling-Mounted Shower and Recessed Eye/Face Wash w/Drain Pan and Daylight Drain $3,752.73
Manufacturer: Haws, Manufacturer Part Number: 8356WCDDModel 8356WCDD barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Emergency combination unit is equipped with a stainless steel drain pan, so when the irrigation process begins, the unit is draining waste properly. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Wall mount combination strobe light and alarm horn special available -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Flexible design of the shower allows for flush in the ceiling mounting, or to hang down from the ceiling -One piece drain tray catches waste fluid during eyewash use -Easy access exterior mounted in-line strainer -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish -Daylight drain feature allows for installation where in-wall drainage is not available -Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Barrier Free Ceiling-mounted Shower and Recessed Eye/Face Wash w/Drain Pan
Haws Barrier Free Ceiling-mounted Shower and Recessed Eye/Face Wash w/Drain Pan $3,494.03
Manufacturer: Haws, Manufacturer Part Number: 8356WCC Model 8356WCC barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. Emergency combination unit is equipped with a stainless steel drain pan, so when the irrigation process begins, the unit is draining waste properly. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Wall mount combination strobe light and alarm horn special available -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Flexible design of the shower allows for flush in the ceiling mounting, or to hang down from the ceiling -Easy access exterior mounted in-line strainer -One piece drain tray catches waste fluid during eyewash use -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish -Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Barrier-Free Wall-Mounted Shower and Recessed Eye/Face Wash
Haws Barrier-Free Wall-Mounted Shower and Recessed Eye/Face Wash $3,027.27
Manufacturer: Haws, Manufacturer Part Number: 8355WCWModel 8355WCW barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Wall mount combination strobe light and alarm horn special available -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Easy access exterior mounted in-line strainer -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with a smooth electro-polished finish -Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.
Barrier-Free Ceiling-Mounted Shower and Recessed Eye/Face Wash
Haws Barrier-Free Ceiling-Mounted Shower and Recessed Eye/Face Wash $2,964.16
Manufacturer: Haws, Manufacturer Part Number: 8355WCCModel 8355WCC barrier-free, wall-mounted, fully recessed combination shower and eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eye washes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. AXION MSR also offers a new hydrodynamic shower design that minimizes the strong physical pressure that drives the water to the outer rim of normal showerheads, making the distribution equal across the entire footprint of the flow. Better use of the water flowing through the shower makes it more effective while providing a more comfortable environment by breaking the streams of water into smaller individual droplets. -Wall mount combination strobe light and alarm horn special available -Eyewash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Flexible design of the shower allows for flush in the ceiling mounting, or to hang down from the ceiling -Easy access exterior mounted in-line strainer -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with a smooth electro-polished finish -Reducing installation time, eyewash and valve assembly are pre-built and fully water/pressure tested -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

© 2025 Spill 911 Inc.

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa