Eye, Ear, Hand and Head Protection (PPE)

Manufacturer: Bradley, Manufacturer Part Number: S59-3045HBradley Navigator Thermostatic Mixing Valve, designed for use in commercial applications. Lead free design, third party certified, contains less than 0.25% lead on wetted surfaces. Valve designed for master hot water distribution. High/Low type valve is designed to control water temperature during periods of both high and low demand. Powerful liquid filled thermostat with 10 year warranty insures constant outlet temperature. Temperature range 90–120 degrees F. Certified to ASSE 1017. Certified to cUPC standards. Certified to CSA standards. Certified by IAPMO to meet lead free plumbing laws. Rough bronze finish. 47 GPM @ 45 PSI. Incoming 3/4in. NPT connections, outlet is 1in. NPT. Dial thermometer. Maximum operating pressure of 125 PSI. Maximum inlet temperature of 200 degrees F. Minimum temperature differential of 15 degrees F between incoming hot water temperature and valve set point. Universal Mounting Capability. Manufactures limited warranty.

Manufacturer: Bradley, Manufacturer Part Number: S19-323EWall or Fixture Mounted General Area Emergency Signaling System. Indoor and Outdoor Installation. NEMA 3R Rated. For Use With Eye or Eye/Face Wash Units. Double Pole Double Throw (DPDT) Flow Switch in Brass Construction, 1/2" NPT Supply. Remote Location Hookup Possible via Contacts in Flow Switch or On Control Board. Automatic, Audible, and Visual Alarm. Minimum 2.4 GPM Flow Required. 6 Foot Cord. Universal Voltage: 90-264 AC, 50-60 Hz. Amber Signal Light and Piezo Fast Beep Horn Sound Activate When Fixture is Used. Central Control Board Powers All Options and Runs on Safe 24 V System. UL Listed.

Manufacturer: Hughes, Manufacturer Part Number: L85GSPEasy-to-clean powder coated stainless steel bowl for excellent corrosion resistance Pop-off dust covers protect the twin spray nozzles from contaminants, these are lifted off by the water jets upon operation via the push plate Fine mesh strainers and an individual flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording test and service history Ideal for laboratories, schools and general light duty indoor use, this pedestal mounted eye/face wash unit meets ANSI Z358.1 and EN 15154 standards, and supports OSHA requirements.SPECIFICATIONSEye/Face Wash Bowl Material: Green Powder-Coated Stainless SteelActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: L85GSEasy-to-clean powder coated stainless steel bowl for excellent corrosion resistance Pop-off dust covers protect the twin spray nozzles from contaminants, these are lifted off by the water jets upon operation via the push plate Fine mesh strainers and an individual flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording test and service history Ideal for laboratories, schools and general light duty indoor use, this wall mounted eye/face wash unit meets ANSI Z358.1 and EN 15154 standards, and supports OSHA requirements.SPECIFICATIONSEye/Face Wash Bowl Material: Green Powder-Coated Stainless SteelActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Bradley, Manufacturer Part Number: S19-2300NAVIGATOR THERMOSTATIC MIXING VALVE FOR EYEWASHES, 103 GPM @ 30 PSI, UNIVERSAL MOUNTING, DIAL THERMOMETER, 1 1/4" NPT HOT/COLD WATER SUPPLY CONNECTIONS RELIABLE LIQUID FILLED THERMOSTAT, COLD WATER BYPASS, HOT WATER SHUT–OFF, SINGLE VALVE DESIGN, LEAD FREE. Kit: NO.

Manufacturer: Bradley, Manufacturer Part Number: S19224FWEye/Face Wash, Wall Mount, Plastic Bowl, Galvanized Steel Pipe w/Yellow Polyurethane Paint, 1/2in. NPT Water Supply, 1–1/4in. Waste, SEI Certified To ANSI Z358.1–2009

Manufacturer: Hughes, Manufacturer Part Number: L85GSTEasy-to-clean powder coated stainless steel bowl for excellent corrosion resistance Pop-off dust covers protect the twin spray nozzles from contaminants, these are lifted off by the water jets upon operation via the push plate Fine mesh strainers and an individual flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording test and service history Ideal for laboratories, schools and general light duty indoor use, this eye/face wash unit mounts flush to a table or bench, meets ANSI Z358.1 and EN 15154 standards, and supports OSHA requirements.SPECIFICATIONSEye/Face Wash Bowl Material: Green Powder-Coated Stainless SteelActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 45GSPCovered bowl ensures that the nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Durable, corrosion-resistant acrylic capped ABS construction Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 and EN 15154 standards, supports OSHA requirements Wall-mounted eye/face wash with high, ANSI-compliant flow rate is suitable for use in all applications not subject to the possibility of freezing or overheating. Solid construction using stainless steel pipework for added improved corrosion resistance. The eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Add optional foot treadle for a secondary means of activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: White Acrylic-Capped ABS PlasticActivation: Pull Down on LidMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 75GEWTwin spray nozzles protected by dust covers that pop-off when eye wash is activated via the push plate Diffusers fitted with fine mesh strainers and an individual flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 and EN 15154 standards, supports OSHA requirements This wall-mounted eye/face wash with open ABS plastic bowl is suitable for use in all applications not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure.SPECIFICATIONSEye/Face Wash Bowl Material: Yellow ABS PlasticActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 45GPCovered bowl ensures that the nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Durable, corrosion-resistant acrylic capped ABS construction Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face. Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 and EN 15154 standards, supports OSHA requirements Wall-mounted eye/face wash with high, ANSI-compliant flow rate is suitable for use in all applications not subject to the possibility of freezing or overheating. Solid construction using galvanized mild steel pipework. The eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Add optional foot treadle for a secondary means of activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: White Acrylic-Capped ABS PlasticActivation: Pull Down on LidMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 85GPTwin spray nozzles protected by dust covers that pop-off when eye wash is activated Diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eyewash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI and EN 15154 standards and supports OSHA requirements Pedestal-mounted, open stainless steel bowl eye/face wash unit, designed at ANSI-compliant height, is generally located in open areas away from walls. Suitable for use in all applications not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Solid construction using galvanized mild steel pipework. Easy activation—highly visible red push plate with universal hand and eye wash sign. Add optional foot treadle for a secondary means of activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Stainless SteelActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 85GSPTwin spray nozzles protected by dust covers that pop-off when eye wash is activated Diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eyewash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI and EN 15154 standards and supports OSHA requirements Pedestal-mounted, open stainless steel bowl eye/face wash unit, designed at ANSI-compliant height, is generally located in open areas away from walls. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Suitable for use in all applications not subject to the possibility of freezing or overheating. Solid construction using stainless steel pipework for improved corrosion resistance. Easy activation—highly visible red push plate with universal hand and eye wash sign. Add optional foot treadle for a secondary means of activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Stainless SteelActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 75GSPTwin spray nozzles protected by dust covers that pop-off when eye wash is activated Diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eyewash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI and EN 15154 standards and supports OSHA requirements Pedestal-mounted, open ABS plastic bowl eye/face wash unit, designed at ANSI-compliant height, is generally located in open areas away from walls. Suitable for use in all applications not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Solid construction using stainless steel pipework for improved corrosion resistance. Easy activation—highly visible red push plate with universal hand and eye wash sign. Add optional foot treadle for a secondary means of activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Yellow ABS PlasticActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 85GEWTwin spray nozzles protected by dust covers that pop-off when eye wash is activated via the push plate Diffusers fitted with fine mesh strainers and an individual flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 and EN 15154 standards, supports OSHA requirements This wall-mounted eye/face wash with open stainless steel bowl is suitable for use in all applications not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure.SPECIFICATIONSEye/Face Wash Bowl Material: Stainless SteelActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 45GEWCovered bowl ensures that the nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Durable, corrosion-resistant acrylic capped ABS construction Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face. Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 and EN 15154 standards, supports OSHA requirements Wall-mounted eye/face wash with high, ANSI-compliant flow rate is suitable for use in all applications not subject to the possibility of freezing or overheating. The eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident.SPECIFICATIONSEye/Face Wash Bowl Material: White Acrylic-Capped ABS PlasticActivation: Pull Down on LidMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 28GEW2.9 US gallon (11-liter) wash provides a gentle flow of water for two minutes Incorporates a stainless steel cylinder with pressure gauge pressurized to 100 PSI (6.9 bar) via a Schrader tire valve Handheld wash diffuser on flexible hose for ease of use This portable eye wash offers an effective solution in locations that are unsuitable for fixed installations and should be used as a secondary safety measure to supplement plumbed in eye/face wash units. Includes an inspection record tag for recording test and service history.SPECIFICATIONSActivation: Hand operated leverMaterial Specifications: Stainless Steel Cylinder

Manufacturer: Hughes, Manufacturer Part Number: 75GPTwin spray nozzles protected by dust covers that pop-off when eye wash is activated Diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eyewash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI and EN 15154 standards and supports OSHA requirements Pedestal-mounted, open ABS plastic bowl eye/face wash unit, designed at ANSI-compliant height, is generally located in open areas away from walls. Suitable for use in all applications not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Solid construction using galvanized mild steel pipework. Easy activation—highly visible red push plate with universal hand and eye wash sign. Add optional foot treadle for a secondary means of activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Yellow ABS PlasticActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 38GEW4 US gallon (15-liter) stainless steel cylinder with handheld drench hose effectively washes eyes, face and body Delivers up to three minutes of water when pressurized to 100 PSI (6.9 bar) via a Schrader tire valve Pressure gauge and dual action safety valve prevent over pressurization and allow the user to vent the cylinder for cleaning and maintenance This portable wash offers an effective solution in locations that are unsuitable for fixed installations and should be used as a secondary safety measure to supplement plumbed in eye/face wash units. Includes an inspection record tag for recording test and service history.SPECIFICATIONSActivation: Squeeze grip operated with lock-on actuating buttonMaterial Specifications: Stainless Steel Cylinder

Manufacturer: Hughes, Manufacturer Part Number: 10GFEW OptiWash™ 10-Gallon Gravity-Fed Eye Wash Station Don’t risk safety, even in remote locations This self-contained, wall-mounted, eye wash is suitable wherever continuous water isn’t available—no plumbing needed. The gravity-fed eye wash station supplies a continuous, controlled flow of a minimum 1.5 LPM (0.4 GPM) for 15 minutes, meeting the ANSI Z358.1 standard. A retrofittable insulated or heated jacket is available to provide a consistent water temperature whatever the climate. Slimline design with handles to aid installation Delivery manifold drains unused water reducing the risk of stagnation High-visibility orange color is easy to identify in emergency situations Simple to use with pull-down activation handle Easy to maintain—wide fill opening with threaded cap enables quick inspection, cleaning and filling Wall mounting bracket included Meets ANSI Z358.1 and EN15154 requirements

Manufacturer: Hughes, Manufacturer Part Number: 16GFEWSelf-Contained 16-Gallon Gravity-Fed Eyewash Station. Suitable wherever continuous water isn't available—no plumbing needed. The gravity-fed eyewash supplies a continuous, controlled flow that exceeds the ANSI Z358.1 standard of 1.5 LPM (0.4 GPM) for 15 minutes, providing a reliable safety solution no matter where you are located. Portable design with carrying handles and concealed mounting bracket make moving and relocating easy Can be wall mounted or used on a bench or tabletop High-visibility color is easy to identify in emergency situations Simple to use with pull-down activation handle Easy to maintain—wide fill opening enables quick inspection, cleaning and filling Meets ANSI Z358.1 and EN15154 requirementsSPECIFICATIONSActivation: Pull Handle

Manufacturer: Bradley, Manufacturer Part Number: S19-788HPORTABLE 15 GALLON PRESSURIZED TANK W/EYEWASH AND 510 WATT HEATER JACKET SELF CONTAINED 10 GALLON TANK W/ EYEWASH AND 510 WATT HEATER JACKET, BUILT IN CARRY HANDLES ALLOWS FOR PORTABILITY FROM ONE LOCATION TO ANOTHER, PRESSURE RELIEF VALVE AND AIR GAUGE, HEATER JACKET PREVENTS FREEZING IN COLD CONDITIONS, INCLUDES SAFETY SIGN AND INSPECTION TAG. ANSI Z358.1 COMPLIANT, SEI, cUPC CERTIFIED. Kit: NO.

Manufacturer: Bradley, Manufacturer Part Number: S19-921HON–SITE GRAVITY FED PORTABLE EYEWASH W 121 WATT HEATER JACKET, HOLDS 7 GALLONS OF POTABLE WATER, LOWER TANK HOUSES PUSH DOWN EYEWASH TRAY HIGH VISABILITY YELLOW SELF CONTAINED 7 GALLON TANK IS TRANSPARENT FOR VISABILITY OF WATER QUALITY AND FILL LEVELS, HEATER JACKET PREVENTS FREEZING IN COLD CONDITIONS, LIGHT WEIGHT UNIT ALLOWS FOR PORTABILITY FROM ONE LOCATION TO ANOTHER, INCLUDES SAFETY SIGN AND INSPECTION TAG. ANSI Z358.1 COMPLIANT, SEI, cUPC CERTIFIED. Kit: NO.

Manufacturer: Bradley, Manufacturer Part Number: S59-4000Bradley Navigator Thermostatic Mixing Valve, designed for use in commercial applications. Lead free design, third party certified, contains less than 0.25% lead on wetted surfaces. Valve designed to control water temperature at the point of use. Paraffin wax filled thermostat insures constant outlet temperature. Temperature range 90–120 degrees F. Certified to ASSE 1070. Certified to cUPC standards. Certified by IAPMO to meet lead free plumbing laws. 5.5 GPM @ 45 PSI. Incoming 1/2in. NPT connections, outlet is 1/2in. NPT. Maximum operating pressure of 125 PSI. Maximum inlet temperature of 200 degrees F. Minimum temperature differential of 10 degrees F between incoming hot water temperature and valve set point. Universal Mounting Capability. Manufactures limited warranty.

Manufacturer: Bradley, Manufacturer Part Number: S19-788 When Plumbing Is Not An Option. These pressurized eyewashes are perfect for remote locations, outdoors or anywhere plumbing is not available. Provides instant relief to the eyes and body with the included eyewash and 8’ drench hose. 10 and 15–gallon units meet ANSI Z358.1–1998 and are SEI Certified. 5–gallon unit meets ANSI criteria as a personal eyewash station. Heated units also available. Stainless Steel Tank with built–in carrying handles Tire filler valve with 0–100 PSI air gauge Pressure relief valve to prevent over–pressurization 8’ hand–held drench hose for total body decontamination Chrome–plated brass eyewash SPECIFICATIONS35 lbs.1 unit