Drum Lifters, Movers and Dispensers

Manufacturer: Morse, Manufacturer Part Number: 4556-PBolt the Bracket Assembly onto the MORcinch Drum Holder to handle a plastic drum that lacks a top rim. Also recommended to more securely hold a fiber drum. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Morse, Manufacturer Part Number: 41Model 41 Drum Lifting Hook is used to lift a horizontal 55–gallon steel drum, 34" to 36" long. This Drum Lifting Hook has an alloy steel lifting ring, steel rods, and malleable iron hooks. It adds 10.6" to the height of your apparatus when lifting a horizontal drum (measured from the drum rim to the inside top of the lifting eye). Capacity: 1,000 Lb.SPECIFICATIONS20" x 5" x 4" - 5 lbs.

Manufacturer: Morse, Manufacturer Part Number: 284Morse model 284 Fork Mounted Hook slides right onto one fork of your forklift so you can use a Morse below hook drum lifter. Fork opening is 5.5" X 1–9/16". Capacity: 2,000 Lb. NOTE: Model 284 Fork Hook is NOT a drum lifter. It is a fork mounted hook from which to suspend a drum lifter or other device.SPECIFICATIONS17" x 9.5" x 9.5" - 11 lbs.

Manufacturer: Morse, Manufacturer Part Number: 90Vert–Karrier drum grab to lift, move and place your drums almost anywhere. Load a drum to and from remote or hard–to–reach areas. The grip will not disconnect until drum is fully down. You only need to operate your hoist to guide the drum grab into position. This saves operator time and protects against dangerous climbing. Capacity: 1,000 Lb. Each Model 90 Verti–Karrier is load tested and factory certified at 125% of rated capacity as per ANSI B30.20. Morse Verti–Lift Drum Lifter Series are NOT for drums without lids or tops in place.SPECIFICATIONS31" x 20" x 9" - 50 lbs.

Manufacturer: Morse, Manufacturer Part Number: 55/30-22ADAPTOR FOR 21.5"–22" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-17.5ADAPTOR, STAINLESS STEEL, FOR 17"– 17.5" DIAMETER, INTEGRATED BRACKETS ADJUST FOR UP TO 38" TALL DRUM

Manufacturer: Morse, Manufacturer Part Number: 55/30M-16ADAPTOR, SPARK RESISTANT, FOR 15.5"– 16" DIAMETER, INTEGRATED BRACKETS ADJUST FOR UP TO 38" TALL DRUM

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-14.5ADAPTOR, STAINLESS STEEL, FOR 14"– 14.5" DIAMETER, INTEGRATED BRACKETS ADJUST FOR UP TO 38" TALL DRUM

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-16ADAPTOR, STAINLESS STEEL, FOR 15.5"– 16" DIAMETER, INTEGRATED BRACKETS ADJUST FOR UP TO 38" TALL DRUM

Manufacturer: Morse, Manufacturer Part Number: 55/30M-19ADAPTOR, SPARK RESISTANT, FOR 18.5"– 19" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30M-20.5ADAPTOR, SPARK RESISTANT, FOR 20"– 20.5" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30M-17.5ADAPTOR, SPARK RESISTANT, FOR 17"–17 .5" DIAMETER, INTEGRATED BRACKETS ADJUST FOR UP TO 38" TALL DRUM

Manufacturer: Morse, Manufacturer Part Number: 55/30M-14.5ADAPTOR, SPARK RESISTANT, FOR 14"–14 .5" DIAMETER, INTEGRATED BRACKETS ADJUST FOR UP TO 38" TALL DRUM

Manufacturer: Morse, Manufacturer Part Number: X03-185OPTION, 16" HANDWHEEL, 185, FACTORY INSTALLED

Manufacturer: Morse, Manufacturer Part Number: 55/30-19GRADAPTOR FOR 18.5"–19" DIAMETER, FOR USE W/ 185G OR 285G SERIES, 185GR OR 285GR SERIES, 300 SERIES

Manufacturer: Morse, Manufacturer Part Number: 5-VF-60-19DRUM CONE, VALVE FLANGE, 60 DEGREE, SIZE #19 FITS 19–1/8" DRUM RIM O.D. WITH DRUM LID REMOVED

Manufacturer: Morse, Manufacturer Part Number: 5-VF-60-17DRUM CONE, VALVE FLANGE, 60 DEGREE, SIZE #17 FITS 17–3/8" DRUM RIM O.D. WITH DRUM LID REMOVED

Manufacturer: Morse, Manufacturer Part Number: G-1-300OPTION, 3–PIECE DRUM HOLDER FOR 1–300 DRUM TUMBLER

Manufacturer: Morse, Manufacturer Part Number: 5-VF-45-17DRUM CONE, VALVE FLANGE, 45 DEGREE, SIZE #17 FITS 17–3/8" DRUM RIM O.D. WITH DRUM LID REMOVED

Manufacturer: Morse, Manufacturer Part Number: 5-VF-45-19DRUM CONE, VALVE FLANGE, 45 DEGREE, SIZE #19 FITS 19–1/8" DRUM RIM O.D. WITH DRUM LID REMOVED

Manufacturer: Morse, Manufacturer Part Number: 5SS-VF-60-23DRUM CONE, T304SS, VALVE FLANGE, 60 DEGREE, SIZE #23 FITS 23–3/8" DRUM RIM O.D. WITH DRUM LID REMOVED

Manufacturer: Morse, Manufacturer Part Number: 5-VF-60-21.5DRUM CONE, VALVE FLANGE, 60 DEGREE, SIZE #21.5 FITS 21–7/8" DRUM RIM O.D. WITH DRUM LID REMOVED

Manufacturer: Morse, Manufacturer Part Number: 5-VF-60-18.5DRUM CONE, VALVE FLANGE, 60 DEGREE, SIZE #18.5 FITS 18–7/8" DRUM RIM O.D. WITH DRUM LID REMOVED

Manufacturer: Morse, Manufacturer Part Number: 5-VF-45-21.5DRUM CONE, VALVE FLANGE, 45 DEGREE, SIZE #21.5 FITS 21–7.8" DRUM RIM O.D. WITH DRUM LID REMOVED