Manufacturer: Justrite, Manufacturer Part Number: 8357This is a GASKET O RING (VITON) 8300/06.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3902The Model G opener (yellow) cuts on the INSIDE of the drum chime and leaves a smooth, burr–free edge for safe handling. This versatile model is considered a general purpose opener because opened drums can either be used for utility containers or sold for scrap. This model has a small, 1–1/2" diameter cutter wheel that travels between the chime and bung fittings as it cuts. It is designed to open standard, 30–55 gallon industrial drums of up to 16–gauge steel with either flat or round chime. Comes with a non–ferrous cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3978The Model G opener (yellow) cuts on the INSIDE of the drum chime and leaves a smooth, burr–free edge for safe handling. This versatile model is considered a general purpose opener because opened drums can either be used for utility containers or sold for scrap. This model has a small, 1–1/2" diameter cutter wheel that travels between the chime and bung fittings as it cuts. It is designed to open standard, 30–55 gallon industrial drums of up to 16–gauge steel with either flat or round chime. Comes with a standard steel cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3931Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge. Comes with a standard steel cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3938Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3962Model J opener (blue) cuts the drum shell BELOW the chime. This model was designed for drum disposal because it removes the entire drum head. Removing both top and bottom heads of a drum makes it easy to flatten or crush the drum, store it and later sell it for scrap. This deheader does not leave a burr–free edge. Comes with a non–ferrous cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3949The Model G opener (yellow) cuts on the INSIDE of the drum chime and leaves a smooth, burr–free edge for safe handling. This versatile model is considered a general purpose opener because opened drums can either be used for utility containers or sold for scrap. This model has a small, 1–1/2" diameter cutter wheel that travels between the chime and bung fittings as it cuts. It is designed to open standard, 30–55 gallon industrial drums of up to 16–gauge steel with either flat or round chime. Comes with standard steel cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 3950The Model G opener (yellow) cuts on the INSIDE of the drum chime and leaves a smooth, burr–free edge for safe handling. This versatile model is considered a general purpose opener because opened drums can either be used for utility containers or sold for scrap. This model has a small, 1–1/2" diameter cutter wheel that travels between the chime and bung fittings as it cuts. It is designed to open standard, 30–55 gallon industrial drums of up to 16–gauge steel with either flat or round chime. Comes with a non–ferrous cutting wheel.

Manufacturer: Wizard Drum, Manufacturer Part Number: 10095This compact, portable Ratchet action manual deheader requires minimal effort. The only manual drum deheader to leave a completely safe burr–free edge. Can be used left or right handed. Ideal for use in areas with no available power source. This deheader will work with 30–55 gallon steel drums that are from 16–20 gauge in thickness. Will dehead most drums in less than two minutes. Ideal for low to moderate steel drum volume (10–25 drums per week). Optional non–ferrous cutter wheel minimizes sparking potential.SPECIFICATIONS19 lbs.1 deheader12" L x 7" W x 18" H

Manufacturer: Wesco, Manufacturer Part Number: 272032Model #: 232111. For connection between drum and true ground. Three–foot–long heavy duty insulated wire rope with "C" clamp on one end and alligator clip on the other. Minimum order Qty 5. WIRE: DELUXE GROUND FILE WI–2033B. Steel Construction. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Justrite, Manufacturer Part Number: 08805 This is a DRUM PLUG WRENCH–85–5–5–5 BRSS. Drum Wrench opens drum bung caps. Rugged, non-sparking, corrosive-resistant tool fits many 2" or ¾" bung styles commonly used on drums. Design of handle protects the hand.

Manufacturer: Wesco, Manufacturer Part Number: 272031Meet OSHA requirements and minimize the dangers of static electricity with our Grounding and Bonding Wires.SPECIFICATIONS1 lb.1 wire3' L

Manufacturer: Justrite, Manufacturer Part Number: 11073This is a GASKET – HOSE.

Manufacturer: Justrite, Manufacturer Part Number: 8420This is a DUCK BILL – BUNA–N.

Manufacturer: Justrite, Manufacturer Part Number: 8251This is a BUNA GASKET– 8204/8211/8213.

Manufacturer: Justrite, Manufacturer Part Number: 8011Justrite Drum Vents provide automatic pressure relief. Operating valve opens at five psig internal pressure in normal service. Vacuum relief is manual or automatic depending on the model and permits four or more gpm flow through a standard .75" faucet. All vents include a flame arrester for added safety.

Manufacturer: Justrite, Manufacturer Part Number: 8259This is a FLAT GASKET– 8204/05/07/08/13.

Manufacturer: Justrite, Manufacturer Part Number: 8015Justrite Drum Vents provide automatic pressure relief. Operating valve opens at five psig internal pressure in normal service. Vacuum relief is manual or automatic depending on the model and permits four or more gpm flow through a standard .75" faucet. All vents include a flame arrester for added safety.

Manufacturer: Justrite, Manufacturer Part Number: 8508Safely Secure Drum Contents Without the Risk of Contamination. Drum Locks are a cost effective solution to controlling storage concerns of all types of liquids, semi–liquids, and powders that come in standard drums. Made of corrosion resistant, non–sparking zinc die cast, the units easily install around the drum bung flange with no risk of cross threading. To secure the drum lock it is not necessary to remove the original bung, therefore there is no contact with the drum contents. This elimination of potential content contamination has applications across many industries, including chemical and food processing. Installs in seconds. Simply place both halves around the bung lip, slide the lock bar through the halves and then attach a padlock through the end hole of the bar. Sold as a pair, these drum locks fit the most popular style of steel and plastic 55 gallon (200L) drums. The steel set includes two units; one to fit over the 2" NPT plug, the other to fit over the ¾” NPT plug. The plastic set includes two units which fit over both 2” plugs. Both sets are available with or without a No. 3 Master Lock® padlock.SPECIFICATIONS1 lbs.1 setFor 55-Gallon Drums

Manufacturer: Justrite, Manufacturer Part Number: 8509Safely Secure Drum Contents Without the Risk of Contamination. Drum Locks are a cost effective solution to controlling storage concerns of all types of liquids, semi–liquids, and powders that come in standard drums. Made of corrosion resistant, non–sparking zinc die cast, the units easily install around the drum bung flange with no risk of cross threading. To secure the drum lock it is not necessary to remove the original bung, therefore there is no contact with the drum contents. This elimination of potential content contamination has applications across many industries, including chemical and food processing. Installs in seconds. Simply place both halves around the bung lip, slide the lock bar through the halves and then attach a padlock through the end hole of the bar. Sold as a pair, these drum locks fit the most popular style of steel and plastic 55 gallon (200L) drums. The steel set includes two units; one to fit over the 2" NPT plug, the other to fit over the ¾” NPT plug. The plastic set includes two units which fit over both 2” plugs. Both sets are available with or without a No. 3 Master Lock® padlock.SPECIFICATIONS2 lbs.1 setFor 55-Gallon Drums

Manufacturer: Justrite, Manufacturer Part Number: 27520This is a FUSIBLE LINK.⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Manufacturer: Justrite, Manufacturer Part Number: 27525This is a CHAIN & CLIP ASSY for P/N 26750.

Manufacturer: Justrite, Manufacturer Part Number: 28682Drum Cover. Width: 19 In. Height: 3 1/4 In. Color: Black. Material: Polyethylene. For use with 55–gallon drums.

Manufacturer: Justrite, Manufacturer Part Number: 27526This is a HINGE PIN & COTTER KEY for P/N 26750.