Dock Seals

Manufacturer: Vestil, Manufacturer Part Number: D-150-19Overall Height: 108", Overall Width: 120", Projection: 19" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-18Overall Height: 108", Overall Width: 120", Projection: 18" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-17Overall Height: 108", Overall Width: 120", Projection: 17" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-15Overall Height: 108", Overall Width: 120", Projection: 15" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-16Overall Height: 108", Overall Width: 120", Projection: 16" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-14Overall Height: 108", Overall Width: 120", Projection: 14" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-13Overall Height: 108", Overall Width: 120", Projection: 13" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-12Overall Height: 108", Overall Width: 120", Projection: 12" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-11Overall Height: 108", Overall Width: 120", Projection: 11" – Dock Seal – For use with an 8'W x 8'H door. Superior 36 oz. Nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. Chemically sealed ends prevent moisture infiltration. Full height air escape tunnel. Mounted and bonded on durable wolmanized wood. 2" nylon reinforced guide stripes. Through the wall installation kits included. Three piece construction: top – 12" high; sides – beveled sides with 9–1/2" width at the wall and 12" width at the face. 5" maximum compression is recommended. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. To ensure proper size complete and fax the survey sheet shown on page 8. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150-10The superior nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. The chemically sealed ends prevent moisture infiltration. It is mounted on and bonded on a durable wolmanized wood and contains a full height air escape tunnel. The unit consists of a three (3) piece construction with beveled fronts and a through the wall installation kit that is included. Five (5"). Application with a flush dock to building in conjunction with an Edge-O-Dock use a twenty (20) inch projection Dock Seal. To ensure proper size complete the survey sheet.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-20Overall Height: 126", Overall Width: 114", Projection: 20" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-18Overall Height: 126", Overall Width: 114", Projection: 18" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-19Overall Height: 126", Overall Width: 114", Projection: 19" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-17Overall Height: 126", Overall Width: 114", Projection: 17" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-16Overall Height: 126", Overall Width: 114", Projection: 16" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-15Overall Height: 126", Overall Width: 114", Projection: 15" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-14Overall Height: 126", Overall Width: 114", Projection: 14" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-13Overall Height: 126", Overall Width: 114", Projection: 13" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-12Overall Height: 126", Overall Width: 114", Projection: 12" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-11Overall Height: 126", Overall Width: 114", Projection: 11" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-10The Dock Seal/Shelter Combination is used with a ninety-six (96) inch width by one-hundred Twenty (120) inch height door. The top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run-off. It contains a high density foam mounted to treated lumber. The verticals are mounted on wooden boards allowing wall mounted down the length of the vertical pieces. Application with flush dock to building in conjunction with an Edge-O-Dock use a twenty (20) inch projection Dock Seal. Unit is non-returnable.