Dock And Trailer Equipment

Manufacturer: Vestil, Manufacturer Part Number: YRD-25-7336-HThe Portable Steel Yard Ramp quickly loads and unload trucks, trailers and rail cars from ground level when no freight dock exists. Increase productivity while reducing material handling costs. Great for construction sites. A manual two-speed hand crank for easy one (1) person height adjustment. The standard features include: positive traction open steel grating, safety locking chains, rubber bumpers and fork positioning loop. Painted neutral earth-tone brown.

Manufacturer: Vestil, Manufacturer Part Number: YRD-20-7336-HThe Portable Steel Yard Ramp quickly loads and unload trucks, trailers and rail cars from ground level when no freight dock exists. Increase productivity while reducing material handling costs. Great for construction sites. A manual two-speed hand crank for easy one (1) person height adjustment. The standard features include: positive traction open steel grating, safety locking chains, rubber bumpers and fork positioning loop. Painted neutral earth-tone brown.

Manufacturer: Vestil, Manufacturer Part Number: WL-AR8Optional Approach Ramp For a 8 (in.) Lowered Height Truck Scissor Dock Lift. Must be anchored to the floor.

Manufacturer: Vestil, Manufacturer Part Number: WL-AR14Optional Approach Ramp For a 14 (in.) Lowered Height Truck Scissor Dock Lift. Must be anchored to the floor.

Manufacturer: Vestil, Manufacturer Part Number: WL-AR10Optional Approach Ramp For a 1 (in.) Lowered Height Truck Scissor Dock Lift. Must be anchored to the floor.

Manufacturer: Vestil, Manufacturer Part Number: TL-200-HP-F-SThe Trailer Lock System is designed for installation directly in front of the loading dock. The electric hydraulic system captures the ICC bar on the back of semi-trailers. To ensure maximum safety the unit comes standard with an accumulator that allows the lock to follow the trailer up and down as it is loaded/unloaded. A beeper and flashing light warns the operator if the lock does not engage the trailer properly. A visual indication of the restraint's status is shown at all times by the traffic light outside and the control panel inside. It comes standard with light package, control panel and three (3) large visual signs.

Manufacturer: Vestil, Manufacturer Part Number: RR-78-20Capacity: 20,000 lbs. , Overall Size w/ Lip: 7'W x 8'4"L , Operation: Pull Chain - Mechanical Docklevelers - All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-76-20Capacity: 20,000 lbs. , Overall Size w/ Lip: 7'W x 6'4"L , Operation: Pull Chain - Mechanical Docklevelers - All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-710-20Capacity: 20,000 lbs. , Overall Size w/ Lip: 7'W x 10'4"L , Operation: Pull Chain - Mechanical Docklevelers - All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-68-20The Mechanical Dockleveler is constructed of heavy duty checkered plate deck steel for long term support of the steel channel understructure. The dock leveler allows for easy truck loading and unloading. The leveler is engineered and designed for minimum maintenance and features a smooth pull chain operation. Includes two (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-66-20Capacity: 20,000 lbs. , Overall Size w/ Lip: 6'W x 6'4"L , Operation: Pull Chain - Mechanical Docklevelers - All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-65-20Capacity: 20,000 lbs. , Overall Size w/ Lip: 6'W x 5'4"L , Operation: Pull Chain - Mechanical Docklevelers - All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-610-20Capacity: 20,000 lbs. , Overall Size w/ Lip: 6'W x 10'4"L , Operation: Pull Chain - Mechanical Docklevelers - All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: FM-3072The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-seven (27) inches, with a thirty-six (36) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: FM-3066The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-seven (27) inches, with a thirty-six (36) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The Mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: D-18H18 (in.) header for Dock Seals.

Manufacturer: FabEnCo, Manufacturer Part Number: DG14-120PCThe Dock Gate provides protection against falls from loading docks. Custom gas struts make the vertical gate easy to open, and tapered guides on the receiver post make for easy alignment when closing. It takes up minimal space and is easy to install using basic tools. Also available in stainless steel by special order, Meets or exceeds OSHA standards. Yellow Power Coated Finish. Fits 10ft openings.

Manufacturer: FabEnCo, Manufacturer Part Number: DG14-96PCThe Dock Gate provides protection against falls from loading docks. Custom gas struts make the vertical gate easy to open, and tapered guides on the receiver post make for easy alignment when closing. It takes up minimal space and is easy to install using basic tools. Also available in stainless steel by special order, Meets or exceeds OSHA standards. Yellow Power Coated Finish. Fits 8ft openings.

Manufacturer: Little Giant, Manufacturer Part Number: CT-3660-16PThe pivoting axles of these trailers are connected by a tie rod which turns the front and rear wheels in opposite directions. This design provides agile maneuvering of individual or multiple trailers in narrow aisles and around tight corners. A rear hitch on the four wheel steering trailer allows multiple trailers to track in the path of the lead trailer. 12 gauge steel deck with boxed edges has reinforced understructure. 16" pneumatic wheels with 1" roller bearings. 2–1/2" ID Ring Drawbar with Pin and Clevis Rear Hitch. Capacity: 2,000–lbs. Dimensions: 36" x 60" x 19".

Manufacturer: Little Giant, Manufacturer Part Number: CS-3672-8MRHDThis versatile unit can be used as an independent platform truck for manual order picking and then quickly connected into a train of trailers. The caster steer design means wheels stay under the load at all times, providing better stability with unevenly distributed loads. The two swivel casters rotate 360°, providing excellent maneuverability even in tight areas. Reinforced 12 gauge steel deck is 11–1/2" high. Heavy service casters to withstand the rigors of towing 8" x 2" mold–on rubber wheels with cast iron centers and roller bearings. Removable pipe rack/pushbar handle extends 29" above the deck. Ring drawbar stays in upright position for manual operation as a platform truck. Pin and clevis coupler at rear. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: CS-3660-8MRHDThis versatile unit can be used as an independent platform truck for manual order picking and then quickly connected into a train of trailers. The caster steer design means wheels stay under the load at all times, providing better stability with unevenly distributed loads. The two swivel casters rotate 360°, providing excellent maneuverability even in tight areas. Reinforced 12 gauge steel deck is 11–1/2" high. Heavy service casters to withstand the rigors of towing 8" x 2" mold–on rubber wheels with cast iron centers and roller bearings. Removable pipe rack/pushbar handle extends 29" above the deck. Ring drawbar stays in upright position for manual operation as a platform truck. Pin and clevis coupler at rear. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: CS-3060-8MRHDThis versatile unit can be used as an independent platform truck for manual order picking and then quickly connected into a train of trailers. The caster steer design means wheels stay under the load at all times, providing better stability with unevenly distributed loads. The two swivel casters rotate 360°, providing excellent maneuverability even in tight areas. Reinforced 12 gauge steel deck is 11–1/2" high. Heavy service casters to withstand the rigors of towing 8" x 2" mold–on rubber wheels with cast iron centers and roller bearings. Removable pipe rack/pushbar handle extends 29" above the deck. Ring drawbar stays in upright position for manual operation as a platform truck. Pin and clevis coupler at rear. Dimensions: 30" x 60".

Manufacturer: Vestil, Manufacturer Part Number: TL-100-F-SShear Strength (lbs.): 32000, Voltage/Phase: 115/1, Draw Pull Sheer Strength (lbs.): 32000, Light Package Construction: Polypropylene – The Trailer Lock System is designed for installation directly in front of the loading dock. The electric hydraulic system captures the ICC bar on the back of semi–trailers. To ensure maximum safety the unit comes standard with an accumulator that allows the lock to follow the trailer up and down as it is loaded/unloaded. A beeper and flashing light warns the operator if the lock does not engage the trailer properly. A visual indication of the restraint's status is shown at all times by the traffic light outside and the control panel inside. It comes standard with light package, control panel and three (3) large visual signs.

Manufacturer: Vestil, Manufacturer Part Number: PTM-GPTUniform Pull Capacity (pounds): 12,000, Uniform Tongue Lift Capacity (pounds): 1,000 Gas Power Trailer Mover is compact in size and easy to use. They are highly maneuverable, making them ideal for turning in tight spaces. Not recommended for use on an incline or slope. 190CC gasoline engine combined with a hydrostatic transmission provides variable speed control and generous low speed torque for precise positioning. Rugged front foam filled tires with aggressive tread pattern provide service on unpaved surfaces. Engine powered hand lever lifts and lowers ball hitch. The three size ball hitch quickly converts to common sizes. Ball sizes; 1-7/8", 2", and 2-5/16". Overall size with handle up is 51"W x 70"L x 50"H. Gas power trailer mover is compact in size and easy to use Ideal for turning in tight spaces making it highly maneuverable Hydrostatic transmission provides variable speed control for precise positioning Rugged foam filled tires with tread pattern are for unpaved surface