Dock And Trailer Equipment

Manufacturer: Checkers, Manufacturer Part Number: MS1602-5-15Rated for a 800 lb working load limit. Standard lengths are 10, 12, and 15 ft. Includes hardware. Custom lengths available. Length: 15 ft. (457.2 cm), Weight: 5.8 lb. (2.6 kg), Color: Black.

Manufacturer: Checkers, Manufacturer Part Number: MS1602-5-12~Rated for a 800 lb working load limit. ~Standard lengths are 10, 12, and 15 ft. ~Includes hardware. ~Custom lengths available. ~Length: 12 ft. (365.76 cm), Weight: 4.9 lb. (2.2 kg), Color: Black.

Manufacturer: Checkers, Manufacturer Part Number: MS1602-5-10Rated for a 800 lb working load limit. Standard lengths are 10, 12, and 15 ft. Includes hardware. Custom lengths available. Length: 10 ft. (304.8 cm), Weight: 3.28 lb. (1.49 kg), Color: Black.

Manufacturer: Vestil, Manufacturer Part Number: LO-J-125Uniform Static Capacity (lbs.): 125000, Uniform Lifting Capacity (lbs.): 50,000, Service Range Minimum (in.): 39, Service Range Max (in.): 51, Wheel Size (in.): 10, Wheel Type: Hard Rubber, Top Cap Diameter (in.): 8 – The Trailer Stabilizing Jack is used to prevent up–ending semi–trailers when they are not connected to a tractor during loading and unloading operations. It is also used to level trailers parked on sloped ground and to prevent landing gear from sinking into a soft surface. This Jack is made of high strength steel construction with a flush–type zerk fitting for lubricating ACME screw. Meets OSHA regulations when used with wheel chocks. Contains a powder coat safety yellow finish that includes a reflective collar for visibility at night.

Manufacturer: Vestil, Manufacturer Part Number: BTA-15005436Uniform Capacity (lbs.): 15000, Height Difference (in.) at 8 degree/17%: 4, Height Difference (in.) at 11 degrees/19%: 5, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 36 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08005442Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 5, Height Difference (in.) at 11 degrees/19%: 6, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–1/2, Usable Length (in.) : 42 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08005430Uniform Capacity (lbs.): 8000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–3/4, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06005442Uniform Capacity (lbs.): 6000, Height Difference (in.) at 8 degree/17%: 5, Height Difference (in.) at 11 degrees/19%: 6, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–3/4, Usable Length (in.) : 42 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: BTA-06005430Uniform Capacity (lbs.): 6000, Height Difference (in.) at 8 degree/17%: 3, Height Difference (in.) at 11 degrees/19%: 4, Bend Degree: 11, Bend Distance from Edge (in.): 9, Leg Distance from Edge (in.): 12, Usable Width (in.): 49–3/4, Usable Length (in.) : 30 – Aluminum Truck Dockboard is built to maximize safety while handling heavy fork trucks and loads. Beveled edge is designed for smooth entry and exit. Designed for low/medium traffic applications. Locking legs prevent movement during loading/unloading. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Manufactured in compliance with OSHA. Capacity is based upon equipment + max load carried multiplied by the single axle rating of total load. Dynamic loading, driver tendencies, speed and frequency of use must be considered.

Manufacturer: Vestil, Manufacturer Part Number: DKL-2Overall Size (W x H): 21" x 66", Number of Rings: 2, Top Step Height: 12", Width of Step: 18", Distance between step: 12" – Walk Thru Style Dock Ladders – Prevent needless dock injuries with Walk–thru Style Dock Ladders. Constructed of steel angle iron. Mount ladder directly to the dock face by either welding or bolting on. The extra high handrail provides maximum assistance and safety. All ladders project out 8" from face of dock.

Manufacturer: Vestil, Manufacturer Part Number: DKL-9Overall Size (W x H): 21" x 150", Number of Rings: 9, Top Step Height: 96", Width of Step: 18", Distance between step: 12" – Walk Thru Style Dock Ladders – Prevent needless dock injuries with Walk–thru Style Dock Ladders. Constructed of steel angle iron. Mount ladder directly to the dock face by either welding or bolting on. The extra high handrail provides maximum assistance and safety. All ladders project out 8" from face of dock.

Manufacturer: Vestil, Manufacturer Part Number: DKL-8Overall Size (W x H): 21" x 138", Number of Rings: 8, Top Step Height: 84", Width of Step: 18", Distance between step: 12" – Walk Thru Style Dock Ladders – Prevent needless dock injuries with Walk–thru Style Dock Ladders. Constructed of steel angle iron. Mount ladder directly to the dock face by either welding or bolting on. The extra high handrail provides maximum assistance and safety. All ladders project out 8" from face of dock.

Manufacturer: Vestil, Manufacturer Part Number: DKL-7Overall Size (W x H): 21" x 126", Number of Rings: 7, Top Step Height: 72", Width of Step: 18", Distance between step: 12" – Walk Thru Style Dock Ladders – Prevent needless dock injuries with Walk–thru Style Dock Ladders. Constructed of steel angle iron. Mount ladder directly to the dock face by either welding or bolting on. The extra high handrail provides maximum assistance and safety. All ladders project out 8" from face of dock.

Manufacturer: Vestil, Manufacturer Part Number: DKL-6Overall Size (W x H): 21" x 114", Number of Rings: 6, Top Step Height: 60", Width of Step: 18", Distance between step: 12" – Walk Thru Style Dock Ladders – Prevent needless dock injuries with Walk–thru Style Dock Ladders. Constructed of steel angle iron. Mount ladder directly to the dock face by either welding or bolting on. The extra high handrail provides maximum assistance and safety. All ladders project out 8" from face of dock.

Manufacturer: Vestil, Manufacturer Part Number: DKL-5Overall Size (W x H): 21" x 102", Number of Rings: 5, Top Step Height: 48", Width of Step: 18", Distance between step: 12" – Walk Thru Style Dock Ladders – Prevent needless dock injuries with Walk–thru Style Dock Ladders. Constructed of steel angle iron. Mount ladder directly to the dock face by either welding or bolting on. The extra high handrail provides maximum assistance and safety. All ladders project out 8" from face of dock.

Manufacturer: Vestil, Manufacturer Part Number: DKL-4Overall Size (W x H): 21" x 90", Number of Rings: 4, Top Step Height: 24", Width of Step: 18", Distance between step: 12" – Walk Thru Style Dock Ladders – Prevent needless dock injuries with Walk–thru Style Dock Ladders. Constructed of steel angle iron. Mount ladder directly to the dock face by either welding or bolting on. The extra high handrail provides maximum assistance and safety. All ladders project out 8" from face of dock.

Manufacturer: Vestil, Manufacturer Part Number: DKL-3Overall Size (W x H): 21" x 78", Number of Rings: 3, Top Step Height: 24", Width of Step: 18", Distance between step: 12" – Walk Thru Style Dock Ladders – Prevent needless dock injuries with Walk–thru Style Dock Ladders. Constructed of steel angle iron. Mount ladder directly to the dock face by either welding or bolting on. The extra high handrail provides maximum assistance and safety. All ladders project out 8" from face of dock.

Manufacturer: Vestil, Manufacturer Part Number: DKL-10Overall Size (W x H): 21" x 162", Number of Rings: 10, Top Step Height: 108", Width of Step: 18", Distance between step: 12" – Walk Thru Style Dock Ladders – Prevent needless dock injuries with Walk–thru Style Dock Ladders. Constructed of steel angle iron. Mount ladder directly to the dock face by either welding or bolting on. The extra high handrail provides maximum assistance and safety. All ladders project out 8" from face of dock.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-5-48Capacity: 5,000 lbs., Platform Size: 48" x 96", Lowered Height: 8", Raised Height: 68", Overall Frame Size: 41" x 93" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: SEH-4860Capacity: 4,400 lbs., Overall Width: 48", Overall Length: 60", Height Differential: 9", Plate Thickness: 1/2" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SEH-4848Capacity: 5,500 lbs., Overall Width: 48", Overall Length: 48", Height Differential: 7", Plate Thickness: 1/2" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SEH-4836Capacity: 7,300 lbs., Overall Width: 48", Overall Length: 36", Height Differential: 5", Plate Thickness: 1/2" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SEH-4830Capacity: 8,800 lbs., Overall Width: 48", Overall Length: 30", Height Differential: 4", Plate Thickness: 1/2" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: SE-4860Capacity: 2,475 lbs., Overall Width: 48", Overall Length: 60", Height Differential: 9", Plate Thickness: 3/8" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).