Dock And Trailer Equipment

Manufacturer: Vestil, Manufacturer Part Number: SE-6060Capacity: 3,090 lbs., Overall Width: 60", Overall Length: 60", Height Differential: 9", Plate Thickness: 3/8" – Steel Truck Dockplate – Constructed of high strength INX=55 (55,000 psi) steel. Safety locking legs prevent slippage between truck and dock. Raised pattern safety tread plate helps provide positive traction. Beveled edges for smooth entry and exit. Chain pickup comes standard on all units. Designed with an 11° bend located 9" from the beveled edge. The legs are 12" from the beveled edge. Manufactured incompliance with OSHA (video available).

Manufacturer: Vestil, Manufacturer Part Number: RR-78-25Capacity: 25,000 lbs., Overall Size w/ Lip: 7'W x 8'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-76-25Capacity: 25,000 lbs., Overall Size w/ Lip: 7'W x 6'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: RR-710-25Capacity: 25,000 lbs., Overall Size w/ Lip: 7'W x 10'4"L, Operation: Pull Chain – Mechanical Docklevelers – All heavy duty construction features 1/4" checkered plate deck (55,000 PSI) steel. 6" structural steel support understructure for long life. Lip is 16" long. Includes telescopic steel toe guards on both sides, flush with platform edge. Service range 12" above and below dock. Includes (2) laminated bumpers.

Manufacturer: Vestil, Manufacturer Part Number: PP-2066Capacity: 20,000 lbs., Operation: Hand Pump, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall–mount brackets, cylinder, 15 feet hydraulic line and oil.

Manufacturer: Vestil, Manufacturer Part Number: PP-3066Capacity: 30,000 lbs., Operation: Hand Pump, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall–mount brackets, cylinder, 15 feet hydraulic line and oil.

Manufacturer: Vestil, Manufacturer Part Number: PP-2566Capacity: 25,000 lbs., Operation: Hand Pump, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall–mount brackets, cylinder, 15 feet hydraulic line and oil.

Manufacturer: Vestil, Manufacturer Part Number: PE-3066Capacity: 30,000 lbs., Operation: Electric, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Edge–O–Dock is easy to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a 3/4 HP, 110/220 Volt, single phase motor prewired to 110 V. Unit comes complete with motor, pump, control box, cylinder, lines and oil.

Manufacturer: Vestil, Manufacturer Part Number: PE-2566Capacity: 25,000 lbs., Operation: Electric, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Edge–O–Dock is easy to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a 3/4 HP, 110/220 Volt, single phase motor prewired to 110 V. Unit comes complete with motor, pump, control box, cylinder, lines and oil.

Manufacturer: Vestil, Manufacturer Part Number: PE-2066Capacity: 20,000 lbs., Operation: Electric, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. Edge–O–Dock is easy to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend and rest on the truck bed. The unit is operated by a 3/4 HP, 110/220 Volt, single phase motor prewired to 110 V. Unit comes complete with motor, pump, control box, cylinder, lines and oil.

Manufacturer: Vestil, Manufacturer Part Number: FM-2566Capacity: 25,000 lbs., Operation: Mechanical, Usable Width: 66" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. The Mechanical Edge–O–Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: EH-7230Capacity: 9,500 lbs., Plate Thickness: ", Width: 72", Length: 30", Height Differential: 4" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: EH-7224Capacity: 11,900 lbs., Plate Thickness: ", Width: 72", Length: 24", Height Differential: 3" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-7230Capacity: 5,400 lbs., Width: 72", Length: 30", Height Difference: 4", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: E-7224Capacity: 6,500 lbs., Width: 72", Length: 24", Height Difference: 3", Plate Thickness: 3/8" – Aluminum Economizer Dockplate – Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with traffic to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid treadplate with bolt–on zinc plated legs and handles. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.

Manufacturer: Vestil, Manufacturer Part Number: BTA-20006660Size (W x L): 66" x 60", Ht. Difference (8°/17%): 7", Ht. Difference (11°/19%): 10", Capacity: 20,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-20006636Size (W x L): 66" x 36", Ht. Difference (8°/17%): 4", Ht. Difference (11°/19%): 5", Capacity: 20,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-15006636Size (W x L): 66" x 36", Ht. Difference (8°/17%): 4", Ht. Difference (11°/19%): 5", Capacity: 15,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-12007230Size (W x L): 72" x 30", Ht. Difference (8°/17%): 3", Ht. Difference (11°/19%): 4", Capacity: 12,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-12006660Size (W x L): 66" x 60", Ht. Difference (8°/17%): 7", Ht. Difference (11°/19%): 10", Capacity: 12,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-12006648Size (W x L): 66" x 48", Ht. Difference (8°/17%): 5", Ht. Difference (11°/19%): 7", Capacity: 12,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-10007236Size (W x L): 72" x 36", Ht. Difference (8°/17%): 4", Ht. Difference (11°/19%): 5", Capacity: 10,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08006660Size (W x L): 66" x 60", Ht. Difference (8°/17%): 7", Ht. Difference (11°/19%): 10", Capacity: 8,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: BTA-08006636Size (W x L): 66" x 36", Ht. Difference (8°/17%): 4", Ht. Difference (11°/19%): 5", Capacity: 8,000 lbs – Aluminum Truck Dockboards with Welded Aluminum Curbs – Engineered and built to maximize safety while handling heavy fork trucks and loads. Locking legs prevent movement during loading and unloading operations. Welded aluminum safety curbs prevent accidental runoffs and provide visible driving lane. Locking legs are uneven to allow the dockboard to sit canted, while not in use, for easier pickup by fork trucks. Bend is 11° and 9" from the edge and the legs are 12" from the edge. Manufactured in compliance with OSHA.