Dock And Trailer Equipment

Manufacturer: Vestil, Manufacturer Part Number: WL-100-5-88Capacity: 5,000 lbs., Platform Size: 96" x 96", Lowered Height: 8", Raised Height: 68", Overall Frame Size: 86" x 93" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-5-810Capacity: 5,000 lbs., Platform Size: 96" x 120", Lowered Height: 8", Raised Height: 68", Overall Frame Size: 86" x 93" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-12-88Capacity: 12,000 lbs., Platform Size: 96" x 96", Lowered Height: 14", Raised Height: 72", Overall Frame Size: 86" x 93" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-12-812Capacity: 12,000 lbs., Platform Size: 96" x 144", Lowered Height: 14", Raised Height: 72", Overall Frame Size: 86" x 118" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-12-810Capacity: 12,000 lbs., Platform Size: 96" x 120", Lowered Height: 14", Raised Height: 72", Overall Frame Size: 86" x 118" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-10-88Capacity: 10,000 lbs., Platform Size: 96" x 96", Lowered Height: 14", Raised Height: 72", Overall Frame Size: 86" x 93" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-10-812Capacity: 10,000 lbs., Platform Size: 96" x 144", Lowered Height: 14", Raised Height: 72", Overall Frame Size: 86" x 118" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: WL-100-10-810Capacity: 10,000 lbs., Platform Size: 96" x 120", Lowered Height: 14", Raised Height: 72", Overall Frame Size: 86" x 118" – Electric–Hydraulic Scissor Dock – Save time and reduce man–hours where there are no docks. Pit or surface mount with the optional approach ramp. Engineered and designed for maximum safety and efficiency. Checkered plate deck is made of heavy gauge steel for years of use. Hydraulic cylinders feature emergency velocity fuse if line breaks. Complete with upper travel limit switch and overload relief valve. Push–button control is 24V AC on a 20 foot long coil cord. Prewired control box includes magnetic starter and overload fuse. High visibility removable handrails with fixed toeboards are standard. Includes beveled toe–guards and electric toe–guards around perimeter of platform. External 6.5 HP 208–230/460V, 3–phase, 60 Hz motor may be located up to 8 feet away from lift. OSHA and ANSI compliant.

Manufacturer: Vestil, Manufacturer Part Number: VDKR-P107Pipe Safety Railings – Railing Sleeve. ***This item by itself does not meet the manufacturer's (Vestil) $50.00 minimum order requirement. You would need to order enough quantity of this item or other Vestil items to reach the $50.00 mark to complete an order. Please contact us for assistance.***

Manufacturer: Vestil, Manufacturer Part Number: VDKR-CONPipe Safety Railings – Connector Kit. ***This item by itself does not meet the manufacturer's (Vestil) $50.00 minimum order requirement. You would need to order enough quantity of this item or other Vestil items to reach the $50.00 mark to complete an order. Please contact us for assistance.***

Manufacturer: Vestil, Manufacturer Part Number: D-150-10The superior nylon reinforced vinyl facing has a higher tear strength than equivalent weight hypalon. The chemically sealed ends prevent moisture infiltration. It is mounted on and bonded on a durable wolmanized wood and contains a full height air escape tunnel. The unit consists of a three (3) piece construction with beveled fronts and a through the wall installation kit that is included. Five (5"). Application with a flush dock to building in conjunction with an Edge-O-Dock use a twenty (20) inch projection Dock Seal. To ensure proper size complete the survey sheet.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-20Overall Height: 126", Overall Width: 114", Projection: 20" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-18Overall Height: 126", Overall Width: 114", Projection: 18" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-19Overall Height: 126", Overall Width: 114", Projection: 19" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-17Overall Height: 126", Overall Width: 114", Projection: 17" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-16Overall Height: 126", Overall Width: 114", Projection: 16" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-15Overall Height: 126", Overall Width: 114", Projection: 15" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-14Overall Height: 126", Overall Width: 114", Projection: 14" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-13Overall Height: 126", Overall Width: 114", Projection: 13" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-12Overall Height: 126", Overall Width: 114", Projection: 12" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-11Overall Height: 126", Overall Width: 114", Projection: 11" – Dock Seal / Shelter Combination – Combines the advantage of low cost and excellent sealing action. Designed for maximum energy savings with long–lasting features. For use with an 8'W x 10'H door. Top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run–off. Header measures 114"W with a 30" drop curtain. Side (verticals) measure 120" tall and contain high density foam mounted to treated lumber. Once mounted, the face of the vertical will measure 12"W and will taper to 9–1/2" at wall. Verticals are mounted on wooden 2" x 12" to allowing wall mounting down the length of the vertical pieces. Applications with a flush dock to building in conjunction with an Edge–O–Dock use a 20" projection Dock Seal. Units are non–returnable.

Manufacturer: Vestil, Manufacturer Part Number: D-150/650-10The Dock Seal/Shelter Combination is used with a ninety-six (96) inch width by one-hundred Twenty (120) inch height door. The top (header) is constructed of wolmanized lumber and is built with a slope to allow for water run-off. It contains a high density foam mounted to treated lumber. The verticals are mounted on wooden boards allowing wall mounted down the length of the vertical pieces. Application with flush dock to building in conjunction with an Edge-O-Dock use a twenty (20) inch projection Dock Seal. Unit is non-returnable.

Manufacturer: Vestil, Manufacturer Part Number: EH-6036Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.SPECIFICATIONS6,600 lbs Capacity36" x 60" x 9.5" - 156 lbs.

Manufacturer: Vestil, Manufacturer Part Number: EH-6030Economical way to speed up truck loading and unloading. Spans the opening between dock and trailer to allow pallet or hand trucks along with people to safely move in and out of the trailer. Constructed of high strength, lightweight aluminum alloy non–skid tread plate. Handles are located on each side for portability. Locking legs for OSHA Compliance. The bend or crown is 11° and located 9" from edge of dockplate. Not for use with fork trucks.SPECIFICATIONS7,800 lbs Capacity30" x 60" x 6.5" - 130 lbs.