Cranes and Jibs

Manufacturer: Vestil, Manufacturer Part Number: CBFC-2000Maximum Capacity at Boom Height: 2000 lbs. @ 34"–96", Rigid Load Wheel: 8", Swivel Rear Caster: 6" – Counter Balanced Floor Cranes – This Counter Balanced Floor Crane has an adjustable boom to allow for maximum adjustment and versatility to lift a variety of loads. Boom is raised with a manual hydraulic hand pump. Boom also telescopes out for greater reach. The counterbalance design eliminates the need for front legs. is makes the unit easier to maneuver and allows the crane to reach tight, hard to reach areas. Counterbalance included. Welded steel construction.

Manufacturer: Vestil, Manufacturer Part Number: CH-200-20A block lifter minimizes manual labor and increases work place efficiency. The lifter allows the user to lift heavy awkward sized blocks to a preferred height. By securely attaching the adjustable lifting bale to a separate lifting device, the unit is ready for product placement. Once the beam/block is in the lower jaw of the lift and is resting alongside the back wall, the wheel can then be turned to firmly press the clamp pad against the block. As the product is secured and is within the limits of capacity, it can then be transferred to the desired location. The robust steel construction maximizes longevity of unit and painted finish diminishes excess damage during daily use. MFG Part# CH-200-20

Manufacturer: Vestil, Manufacturer Part Number: HDP-CLRod Length: 36", Rod Diameter: 2–3/4", Overall Width: 21", Capacity: 1500 lbs. – Coil Lifter – The hoist mounted Coil Lifter has adjustable balance points to accommodate different sized coils. Coils can be up to 90" in diameter and weigh as much as 1,500 pounds. The top adjusting bail allows the operator to insure level transportation of load. Coil lifer is compact for easy storage. Steel construction. Painted finish. Lifting ring and hoist sold separately.

Manufacturer: Vestil, Manufacturer Part Number: CCF-36-4Style: Fork Mounted Inverted, Length: 36", Pole Diameter: 4", Capacity: 3,000 lbs. – Coil Ram / Lifter – The Coil Lifter is used to easily maneuver many types of coiled material. Coil Lifters are manufactured to accommodate multiple core sizes. Sturdy steel construction and painted blue. Fork mounted units feature 7" wide x 2" tall (usable) fork pockets.

Manufacturer: Vestil, Manufacturer Part Number: CH-200-30A block lifter minimizes manual labor and increases work place efficiency. The lifter allows the user to lift heavy awkward sized blocks to a preferred height. By securely attaching the adjustable lifting bale to a separate lifting device, the unit is ready for product placement. Once the beam/block is in the lower jaw of the lift and is resting alongside the back wall, the wheel can then be turned to firmly press the clamp pad against the block. As the product is secured and is within the limits of capacity, it can then be transferred to the desired location. The robust steel construction maximizes longevity of unit and painted finish diminishes excess damage during daily use. MFG Part# CH-200-20

Manufacturer: Vestil, Manufacturer Part Number: HDP-4-48Capacity: 4,000 lbs., Fork Length: 48", Overall Fork Width: 25", Fork Size: 4"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: VAN-J-ACLift items from ground to van floor height then rotate cargo into area. This is an AC powered winch. Unit is designed for vertical lifting only. Do not use unit for lifting personnel or overhead lifting.

Manufacturer: Vestil, Manufacturer Part Number: HDP-6-48Capacity: 6,000 lbs., Fork Length: 48", Overall Fork Width: 27", Fork Size: 5"W x 2"H, Bail: 4"W x 7"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: HDP-2-48Capacity: 2,000 lbs., Fork Length: 48", Overall Fork Width: 25", Fork Size: 2"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: HDP-6-54Capacity: 6,000 lbs., Fork Length: 54", Overall Fork Width: 30", Fork Size: 5"W x 2"H, Bail: 4"W x 7"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: HDP-6-42Capacity: 6,000 lbs., Fork Length: 42", Overall Fork Width: 25", Fork Size: 5"W x 2"H, Bail: 4"W x 7"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: HDP-2-36Capacity: 2,000 lbs., Fork Length: 36", Overall Fork Width: 25", Fork Size: 2"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: HDP-4-36Capacity: 4,000 lbs., Fork Length: 36", Overall Fork Width: 25", Fork Size: 3"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: SAC-1036Arm Length (in.): 36, Uniform Capacity per Side (pounds): 12,250, Component: Single–Sided Upright – Structural Cantilever Racking offers flexibility to custom–fit individual applications. The unique bolt together construction with welded steel components offers a great combination of strength and durability. Individual components are sold separately to accommodate your requirements. Arms attach to this single–sided upright with a "C" clamps that are infinitely adjustable.

Manufacturer: Vestil, Manufacturer Part Number: HDP-2-42Capacity: 2,000 lbs., Fork Length: 42", Overall Fork Width: 25", Fork Size: 2"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: HDP-4-42Capacity: 4,000 lbs., Fork Length: 42", Overall Fork Width: 25", Fork Size: 4"W x 2"H, Bail: 3"W x 5"H – Pallet Lifters – These solid steel constructed lifters contain tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load. Meets ASME B30.20 Standard 1993. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: CJIB-3Under I–Beam to Ground: 84", I–Beam Usable Length: 54", I–Beam (Flange x Height): 2.66" x 4", Capacity (Pounds): 300 – Mini Overhead Cantilever Jibs – Utilize this unique jib in work cells and work areas. Unique fixed–height design allows for outriggers to be mounted underneath a work bench. Easily lift product from cart to workbench. Straddle width is 48" (ID). Hoist and trolley can be ordered separately. Steel construction.

Manufacturer: Vestil, Manufacturer Part Number: SSAL-12-NLStructural Cantilever Racking offers flexibility to custom-fit individual applications. The unique bolt together construction with welded steel components offers a great combination of strength and durability. Individual components are sold separately to accommodate your requirements. This straight arm with no lip attaches to upright with a "C" clamps that are infinitely adjustable.

Manufacturer: Vestil, Manufacturer Part Number: CJIB-20Under I–Beam to Ground: 78 1/2", I–Beam Usable Length: 54", I–Beam (Flange x Height): 3.33" x 6", Capacity (Pounds): 2,000 – Mini Overhead Cantilever Jibs – Utilize this unique jib in work cells and work areas. Unique fixed–height design allows for outriggers to be mounted underneath a work bench. Easily lift product from cart to workbench. Straddle width is 48" (ID). Hoist and trolley can be ordered separately. Steel construction.

Manufacturer: Vestil, Manufacturer Part Number: SAC-1012Arm Length (in.): 12, Uniform Capacity per Side (pounds): 26,500, Component: Single–Sided Upright – Structural Cantilever Racking offers flexibility to custom–fit individual applications. The unique bolt together construction with welded steel components offers a great combination of strength and durability. Individual components are sold separately to accommodate your requirements. Arms attach to this single–sided upright with a "C" clamps that are infinitely adjustable.

Manufacturer: Vestil, Manufacturer Part Number: SAC-1024Arm Length (in.): 24, Uniform Capacity per Side (pounds): 16,600, Component: Single–Sided Upright – Structural Cantilever Racking offers flexibility to custom–fit individual applications. The unique bolt together construction with welded steel components offers a great combination of strength and durability. Individual components are sold separately to accommodate your requirements. Arms attach to this single–sided upright with a "C" clamps that are infinitely adjustable.

Manufacturer: Vestil, Manufacturer Part Number: CJIB-6Under I–Beam to Ground: 84", I–Beam Usable Length: 54", I–Beam (Flange x Height): 2.66" x 4", Capacity (Pounds): 600 – Mini Overhead Cantilever Jibs – Utilize this unique jib in work cells and work areas. Unique fixed–height design allows for outriggers to be mounted underneath a work bench. Easily lift product from cart to workbench. Straddle width is 48" (ID). Hoist and trolley can be ordered separately. Steel construction.

Manufacturer: Vestil, Manufacturer Part Number: FHA-4-10-10The Fixed Height Aluminum Gantry Cranes are ideal for the manufacturing and maintenance facilities. The aluminum construction is easily manageable and can be simply assembled for immediate use. The unit has a fixed height for working in a permanent or semi-permanent environment. The casters allow the user to move the crane from workstation to workstation and smoothly roll over rough surfaces, while not marring. Do not move units while loaded. MFG Part# FHA-4-10-10

Manufacturer: Vestil, Manufacturer Part Number: FHA-6-8-10The Fixed Height Aluminum Gantry Cranes are ideal for the manufacturing and maintenance facilities. The aluminum construction is easily manageable and can be simply assembled for immediate use. The unit has a fixed height for working in a permanent or semi-permanent environment. The casters allow the user to move the crane from workstation to workstation and smoothly roll over rough surfaces, while not marring. Do not move units while loaded. MFG Part# FHA-6-8-10