Best Selling Products

Manufacturer: Vestil, Manufacturer Part Number: SBM-80Lift uneven loads and keep them level with increased safety. The Spreader Beam width ranges from 8" to 72" in 2" increments. Center clevis can be adjusted in 2" increments. Clevis slides between two 5" channels. Meets ASME B30.20–1993 standard.SPECIFICATIONS8,000 lbs Capacity104.5" x 6" x 24.5" - 443 lbs.

Manufacturer: Vestil, Manufacturer Part Number: ASP-48-HRThe Adjustable Step-Mate Stand can be used as either a comfortable worker platform or a semi-permanent step. The serrated surface ensures safe footing. Models feature handrails for added stability during use. The legs adjust individually by screwing them into or out of the leg base. The unit has a welded construction.

Manufacturer: Checkers, Manufacturer Part Number: CPADACN-4/5-GDADA accessibility ramps provide a safer crossing for vehicle and pedestrian traffic while protecting valuable electrical cables and hose lines.

Manufacturer: Nochar, Manufacturer Part Number: A660_Acid_Bond_40_LbAcid Bond is a new concept for solidifying acid (water based) liquids. Acid Bond is a dry granular crystal polymer which, unlike traditional baby diaper polymers, will bond and solidify contaminated acid liquid at any pH.Acid Bond is a non–toxic, non–hazardous, non–corrosive, environmentally friendly bonding agent which has passed the most rigid testing for long term burial of acid based liquid waste. Also suitable for incineration, Acid Bond creates less than 2% ash.Acid Bond works by creating a strong mechanical bond with liquid acids, making the waste safer to handle, transport, and dispose of. When solidifying acids or any hazardous liquid, it is recommended that the final waste should be disposed of according to federal, state, and local laws.40 lb. container.SPECIFICATIONS1 container40 lb. container

Manufacturer: Skolnik, Manufacturer Part Number: HM9601For Safe Transportation of Hazardous Waste For the safe and secure way to store or transport a wide range of materials. These open–head primary and Overpack containers, made of high–quality carbon steel, meet UN Structural Testing requirements and feature an optional corrosion–resistant lining of epoxy–phenolic. Painted bright yellow with a red cover, these easy–to–recognize drums come in every size you need: from 8 to 110 gallon capacities and range from 1.5mm to 0.9mm metal thickness combinations. Helps you comply with 49 CFR 173.3(c). Leverlock closures are available upon request. ***Minimum ORDER IS 7 Drums*** SPECIFICATIONS1A2/X440/S - 82 lbs.1 drum16/16/16 Gauge Steel

Manufacturer: Skolnik, Manufacturer Part Number: HM8518For Safe Transportation of Hazardous Waste For the safe and secure way to store or transport a wide range of materials. These open–head primary and Overpack containers, made of high–quality carbon steel, meet UN Structural Testing requirements and feature an optional corrosion–resistant lining of epoxy–phenolic. Painted bright yellow with a red cover, these easy–to–recognize drums come in every size you need: from 8 to 110 gallon capacities and range from 1.5mm to 0.9mm metal thickness combinations. Helps you comply with 49 CFR 173.3(c). Leverlock closures are available upon request. ***Minimum ORDER IS 9 Drums*** SPECIFICATIONS1A2/X440/S - 66 lbs.1 drum18/18/18 Gauge Steel

Manufacturer: Skolnik, Manufacturer Part Number: HM8520For Safe Transportation of Hazardous Waste For the safe and secure way to store or transport a wide range of materials. These open–head primary and Overpack containers, made of high–quality carbon steel, meet UN Structural Testing requirements and feature an optional corrosion–resistant lining of epoxy–phenolic. Painted bright yellow with a red cover, these easy–to–recognize drums come in every size you need: from 8 to 110 gallon capacities and range from 1.5mm to 0.9mm metal thickness combinations. Helps you comply with 49 CFR 173.3(c). Leverlock closures are available upon request. ***Minimum ORDER IS 9 Drums*** SPECIFICATIONS1A2/Y440/S - 52 lbs.1 drum20/20/20 Gauge Steel

Manufacturer: Vestil, Manufacturer Part Number: CH-20-8Lifting Capacity: 2,000 lbs., Maximum Coil Width: 8", Minimum Coil Radial: 16", Minimum Inside Diameter: 10" – Overhead Coil Hook – Designed for lifting heavy coils with an overhead lifting device. Easily position coils from horizontal to vertical position. Steel construction with painted finish.

Manufacturer: Aleco, Manufacturer Part Number: 171130Continuous rolls of PVC strip door material for the do–it–yourself. Same material as listed for complete strip doors. No mounting hardware included.SPECIFICATIONS8-inchx198x150-foot-bulk-roll-scratch-guard-ribbed-stripping23" x 8.75" x 23.25" - 55 lbs.

The ProChem® Potable Water Polyethylene Tank is designed for optimal efficiency and dependability. Featuring an integrally molded pump mounting platform, dual calibration scales, and a secure twist lid, this FDA-approved tank performs at a level comparable to industry-standard 75-gallon water tanks and corresponding designs. Its innovative construction streamlines both installation and maintenance for a wide range of potable water storage applications.Key Specifications• Manufacturer: Peabody Engineering (Part Number: 01-34027)• Dimensions: Dia 27" x Hgt 40" with an 8" twist lid• Material: FDA-approved polyethylene rated for 1.0 specific gravity (water only)• Features: Integrally molded pump mounting platform, standard process fittings for efficient fill and discharge, clear calibration in both liters and gallonsWhy Choose This Tank?Engineered for residential, marine, and mobile potable water storage, this tank offers outstanding durability and user-friendly features that surpass typical market standards. Its natural color and easy-to-read dual calibration enhance operational safety, while the uniquely integrated pump platform improves functionality. Discover additional options in our Peabody Engineering and Tank Containment collections. Contact our support team for more details or to customize your solution.

Manufacturer: Vestil, Manufacturer Part Number: FM-2078Capacity: 20,000 lbs., Operation: Mechanical, Usable Width: 78" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. The Mechanical Edge–O–Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: HDD-72-15-PCapacity: 1,500 lbs., Dump Height: 72", Rotation Height: 155", Level Height: 97", Portable Unit – Hydraulic Drum Dumper – Works with 55 and 30–gallon plastic, steel and fiber drums. The unit has a solid steel chute. Portable unit with two rigid and two swivel casters with floor lock screws. All steel construction. Standard features include: 56 frame, .75 HP motor, 120V single phase, 60Hz with an 8 foot long power cord and plug. Upper travel limit switch, emergency brass safety velocity fuse in cylinder and vertical adjustment drum restraints are standard. Chute is rotated with a hand held control on an 8 ft. long coil cord standard.

Manufacturer: Vestil, Manufacturer Part Number: TS-15-7272Capacity: 15,000 lbs., Overall Size: 72"W x 72"L, Height Difference: 12" – Steel Truck Dockboard – Constructed of high strength (55,000 psi) steel for long life. Beveled edges on both ends permit smooth entry and exit. Deck is diamond plated for safe, efficient use. Welded safety curbs for maximum strength. Locking legs minimize ramp movement and are uneven to allow the dockboard to sit canted for easier floor pickup by forklifts. Standard with leverlift for quick portability with fork truck. Optional accessories: lifting chains, span locks, span pins/holes and removable pickup loops. Manufactured in compliance with OSHA.

Manufacturer: Vestil, Manufacturer Part Number: FM-2572Capacity: 25,000 lbs., Operation: Mechanical, Usable Width: 72" – Edge–O–Docklevelers – Permanently attaches to face of dock. Recommended for docks at least 48" high. Each unit provides a service range of 5" up and 5" down. When the trailer departs the lip drops automatically behind the face of the bumpers. Concrete recess is not required. Complete with 2" x 8" x 18" bumpers and installation instructions. Standard ramping length is 27". A steel dock edge is required for proper installation. The Mechanical Edge–O–Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests on the truck bed. As the trailer departs, the lip retracts behind the bumper face automatically.

Manufacturer: Vestil, Manufacturer Part Number: ATS-12-68Uniform Capacity (pounds): 350, Number of Steps: 20, Top Step Height (in.): 144, Step Angle (degrees): 68, Safety Chain (in.): 3/16, Top Step Depth (in.): 9–1/2, Top Step Length (in.): 23–1/4, Step (excluding top step) Depth (in.): 10–1/2, Step (excluding top step) Length (in.): 9, Span Length (in.): 64–1/2, Construction: Steel, Finish: Powder Coat Safety – Yellow – Alternating–Tread Stair design offers a shorter span than traditional steps. Features handrail on each side of unit, dual safety chain at the top of the stair and formed steel steps with raised surfaces for better traction. Welded steel construction with bolt–on handrails.

Manufacturer: UltraTech, Manufacturer Part Number: 8012Spill Response Pool Folds Into Compact Package Until Needed – Quickly Opens and Bladder Unfurls to Capture Large Spills! Ultra–Pop Up Pool Plus is available in 20, 66 and 150–gallon sizes. Simply unfold the Pool and open the Bladder Compartment — the Bladder will automatically expand/unfurl as the liquid level in the pool rises. Compact folded size — stores efficiently inside spill kits, under/behind seats or in tool boxes Opens and is ready to respond in seconds – minimizes spillage and exposure of hazardous material to the environment Excellent chemical resistance, including diesel fuel, antifreeze, acids, caustics and corrosives Helps minimize environmental damage and related clean–up costs Excellent for response to damaged saddle tanks and cross–over lines, hazmat spills, leaking containers, machinery and piping SPECIFICATIONS2.5 lbs.1 pool4"D x 4"W x 18"H; Fully Deployed - 60"D x 58"W x 5"H

Manufacturer: Enpac, Manufacturer Part Number: 7205GRAB HOLD OF THE ULTIMATE 6–PACK! Maximize floor space while eliminating clutter and safety hazards. Efficiently sized to easily move through standard doorways. Can be moved by forklift or crane, providing you multiple storage and transport options. Handles one to six cylinders with diameters of 3" to 10". Optional Accessory Strap can be added to bottom for extra security. The Caster Frame gives the 6–Pack Cylinder Rack mobility to go anywhere! Meets OSHA 29 CFR.1910 regulations. 6–Pack Ramp Optional ramp attaches to the 6–Pack Cylinder Rack for easy maneuvering of cylinders. Folds up to minimize space.⚠ WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.SPECIFICATIONS1 lb.1 strap

Manufacturer: Eagle, Manufacturer Part Number: 1706AFFORDABLE PROTECTION. Eagle® Column Protectors provide affordable protection for warehouse and factory columns, corners, posts and beams. Absorbs impact from tow motors, minimizing column, fork truck and personnel damage and injury. Blow–molded of high density polyethylene, providing excellent cold impact and chemical resistance. Fits all types of columns. Additional colors available – call us for details. Rounded design improves deflection of impact Stackable for added height protection Easy installation – 2 nylon belts with Velcro® fasteners Weather–Proof material with UV protection Fits all types of columns (H–beam, I–beam, square and round) SPECIFICATIONS40 lbs.1 6" column protector24" Dia. x 42" H

Manufacturer: Eagle, Manufacturer Part Number: U2-51-SX55 gal. Red - w/5/8” O.D. Flex Spout Type II Safety Can

The Exair Chip Trapper System (Manufacturer Part Number: 6198) uses innovative, patent-pending technology to efficiently separate chips, swarf, and shavings from used coolants and other liquids. This high-lift chip trapper is designed for rapid, spill-free cleaning in industrial settings. Its unique process traps debris in a reusable filter bag while only clean liquid is recirculated, offering a fast and safe cleaning solution for machines with sumps, parts washers, tanks, and storage containers. Compatible with 30-, 55-, or 110-gallon drums, this system is built for versatility and operational efficiency.Features & Benefits• Operates without moving parts for enhanced durability• Self-priming design with compressed air for quick drum filling or emptying• Efficient, spill-free cleanup that improves safety and reduces downtime• Patent-pending technology ensures reliable separation of solids from liquidsApplications• CNC machines and lathes• Parts washers and metalworking equipment• Tanks, pans, and contaminated liquid storage containers• Industrial coolant recovery systemsWhat’s Included• Reversible Drum Vac that fills or empties a 55-gallon drum in under two minutes• Chip Trapper Valve assembly for seamless operation• A flexible 10’ hose and chip wand for targeted cleaning• Two 5-micron filter bags (with additional micron options available separately)• Drum options: 30, 55, or 110 gallons for versatile useFor more information on our chip trapper systems, visit our Chip Trappers collection or explore more solutions for industrial safety in our Exair collection.Safety Note: Use caution when processing liquids with low flash points, and consult safety guidelines to ensure proper handling.

Manufacturer: Vestil, Manufacturer Part Number: MTC-55Uniform Capacity (pounds): 7,000, Accepts: 55–gallon drum, Maximum Compacting Force (pounds): 7000, Service Range (in.): 3–3/4 to 40–1/2, Extends To (in.): 86–3/32 – This easy to use 55 Gallon Drum Compactor can be used to compact the contents of drums easily. Manual ratcheting mechanism. Ratchet mechanism is also used to retract compacting plate. Compacting plate direction is adjusted with selector levers. Ratchet lever is secured in the UP position with locking pin. This drum waste compactor includes two (2) wheels for tiltandroll portability of unit when empty. Drum not included with manual drum compactor.

Manufacturer: Skolnik, Manufacturer Part Number: ST5501When Purity Counts When product integrity and purity are important, turn to stainless steel. These drums outperform conventional drums with their higher tensile strength, corrosion resistance and reusability. Specially designed for storage, shipping and handling of foods and chemicals, where product protection and purity count. UN Approved and manufactured from the highest quality 304–2B polished, heavy–gauge stainless steel. Open–head drums have removable tops with rubber gasket. Closed–head drums have 2" NPT and 3/4" NPT bungs. ***Minimum ORDER IS 3 Drums*** SPECIFICATIONS1A2/X440/S, 1A2/Y1.5/200 - 60 lbs.1 drum16/16/16 Gauge Steel

Manufacturer: Skolnik, Manufacturer Part Number: CQ5504UN Approved The economical workhorse of the container system! These UN Approved carbon steel, coldrolled drums come in a variety of sizes to meet all your needs. Both open and closedhead drums feature a corrosive resistant interior and can be lined with epoxyphenolic for added protection. Openhead drums have removable tops with sponge rubber gasket, 12gauge bolt ring closure and plated bolt and nut. Closedhead drums have 2" NPT and 3/4" NPT bungs. Custom colors, parts and Leverlock closures are available upon request. ***Minimum ORDER IS 12 Drums*** 20, 30, 55 Gallon Lined...add $9 SPECIFICATIONS1A2/Y425/S, 1A2/Y1.2/100 - 38 lbs.1 drum18/20/20 Gauge Steel

Manufacturer: Skolnik, Manufacturer Part Number: CQ5516UN Approved The economical workhorse of the container system! These UN Approved carbon steel, coldrolled drums come in a variety of sizes to meet all your needs. Both open and closedhead drums feature a corrosive resistant interior and can be lined with epoxyphenolic for added protection. Openhead drums have removable tops with sponge rubber gasket, 12gauge bolt ring closure and plated bolt and nut. Closedhead drums have 2" NPT and 3/4" NPT bungs. Custom colors, parts and Leverlock closures are available upon request. ***Minimum ORDER IS 11 Drums*** 20, 30, 55 Gallon Lined...add $9 SPECIFICATIONS1A1/X1.8/300 - 60 lbs.1 drum16/16/16 Gauge Steel