All

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-24-6.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and open-top so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-24-6.5

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-36-4.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and a removable cap so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-36-4.5

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-36-6.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and open-top so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-36-6.5

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-42-4.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and a removable cap so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-42-4.5

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-42-6.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and open-top so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-42-6.5

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-48-4.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and a removable cap so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-48-4.5

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-48-6.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and open-top so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-48-6.5

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-62-5.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and a removable cap so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-62-4.5

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-62-4.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and a removable cap so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-62-4.5

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-62-6.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and open-top so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-62-6.5

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-72-4.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and a removable cap so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-72-4.5

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-72-6.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and open-top so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-72-6.5

Manufacturer: Vestil, Manufacturer Part Number: BOLPP-72-5.5Make your bollards permanent by setting them in concrete. The extra length of the Pour In Place Bollard allows you to maintain the needed height while fixing the bollard in concrete. Bollard comes with slide through lag anchors and a removable cap so the bollard can be filled with concrete to increase its strength and durability. Powder coated yellow for high visibility. Assembly required. MFG Part# BOLPP-72-4.5

Manufacturer: First Aid Only, Manufacturer Part Number: G310ACPVP Iodine Wipes (Unitized Refill), 50/Box - Model Number: G310|UOM: BX - First Aid and Emergency Products - Wound Care - Antiseptics and Ointments

Manufacturer: Bradley, Manufacturer Part Number: S09-010APowdered Soap Valve

Manufacturer: Vestil, Manufacturer Part Number: STPC-EHDDescription: 115V AC (electric hydraulic driven), R.P.M.: 8, Height: 12", Capacity: 4000 lbs. – Stand Alone Powered Carousel – Easily rotate pallets, skids, and other large objects with these rugged powered carousels. Each unit includes a 48" diameter round treadplate turntable. Turntable is supported with inverted casters for use as bearings. Units are complete with turntable, base, 115V single–phase power unit, and variable–speed control (electric/hydraulic unit has fixed speed control). Turntable is operated with a foot control. Heavy–duty steel construction with painted finish.

Manufacturer: Accuform, Manufacturer Part Number: KDD320Power Cord Plug Lockout. Lockout the "other end" of a power cord from being connected to equipment. Prevent electronic equipment, such as. computers and power supplies, with its. removable input power cords from being plugged in and powered up. This built–in, 3–pin plug connection is also known as an IEC plug. To use, turn power off and remove power cord. Insert the orange, nylon plastic lockout into the plug well in the equipment, rotate the thumbscrew to tighten, line up holes, and secure with padlock sold separately – shackle diameter up to 1/4").

Manufacturer: Wesco, Manufacturer Part Number: 272414• 47 1/4" turning radius. • Deck height from floor: 12.375". • Finger tip variable speed controller with forward and reverse modes. Illuminated battery status indicator. • Key lock and emergency stop. • Motor: 370 watts. • Maximum climbing incline: 8º . • (2) 12 V 40 A.H. batteries and charger included. • Charge time: 7-8hr. • Continuous run time: 6 hr. • Motor controller: Curtis 110 amp. • Front wheels: 10" pneumatic. • Rear swivel polyurethane casters: 5" x 2". • Reverse direction safety beeper and reduced speed in reverse for added safety. • Full perimeter bumper helps prevent wall damage. • Rear panel grid helps keep cargo in place. • Durable white powder coat finish with black rubber deck mat. • 43" handle height. • Steel thickness 2.5 mm.

Manufacturer: Wesco, Manufacturer Part Number: 272413• 47 1/4" turning radius. • Deck height from floor: 12.375". • Finger tip variable speed controller with forward and reverse modes. Illuminated battery status indicator. • Key lock and emergency stop. • Motor: 370 watts. • Maximum climbing incline: 8º . • (2) 12 V 40 A.H. batteries and charger included. • Charge time: 7-8hr. • Continuous run time: 6 hr. • Motor controller: Curtis 110 amp. • Front wheels: 10" pneumatic. • Rear swivel polyurethane casters: 5" x 2". • Reverse direction safety beeper and reduced speed in reverse for added safety. • Full perimeter bumper helps prevent wall damage. • Rear panel grid helps keep cargo in place. • Durable white powder coat finish with black rubber deck mat. • 43" handle height. • Steel thickness 2.5 mm.

Manufacturer: Wesco, Manufacturer Part Number: 272415• 47 1/4" turning radius. • Deck height from floor: 12.375". • Finger tip variable speed controller with forward and reverse modes. Illuminated battery status indicator. • Key lock and emergency stop. • Motor: 370 watts. • Maximum climbing incline: 8º . • (2) 12 V 40 A.H. batteries and charger included. • Charge time: 7-8hr. • Continuous run time: 6 hr. • Motor controller: Curtis 110 amp. • Front wheels: 10" pneumatic. • Rear swivel polyurethane casters: 5" x 2". • Reverse direction safety beeper and reduced speed in reverse for added safety. • Full perimeter bumper helps prevent wall damage. • Rear panel grid helps keep cargo in place. • Durable white powder coat finish with black rubber deck mat. • 43" handle height. • Steel thickness 2.5 mm.

Manufacturer: Wesco, Manufacturer Part Number: 272416• 47 1/4" turning radius. • Deck height from floor: 12.375". • Finger tip variable speed controller with forward and reverse modes. Illuminated battery status indicator. • Key lock and emergency stop. • Motor: 370 watts. • Maximum climbing incline: 8º . • (2) 12 V 40 A.H. batteries and charger included. • Charge time: 7-8hr. • Continuous run time: 6 hr. • Motor controller: Curtis 110 amp. • Front wheels: 10" pneumatic. • Rear swivel polyurethane casters: 5" x 2". • Reverse direction safety beeper and reduced speed in reverse for added safety. • Full perimeter bumper helps prevent wall damage. • Rear panel grid helps keep cargo in place. • Durable white powder coat finish with black rubber deck mat. • 43" handle height. • Steel thickness 2.5 mm.

Spill 911 Inc. presents the POWER DRIVE STACKER, model PCBFL-64-30 by Wesco – a versatile solution created specifically for industrial and commercial applications. Designed to simplify material handling while improving workplace safety, this stacker is perfect for manufacturers, warehouses, and facilities seeking efficient lifting and stacking solutions. With its rugged design and innovative features, it meets strict industrial standards and delivers exceptional maneuverability in tight spaces.Key Features• Battery-powered drive and lift system with maintenance-free sealed batteries• Fingertip controls built into the steering handle for precise variable speeds• 180° hinged design for superior maneuverability in confined areas• Enhanced safety with a floor lock, safety screen, and an automatic emergency switch• Compliant with ANSI B56.10 standardsProduct Specifications• Raised Height: 64 inches• Fork Length: 30 inches• Manufacturer: Wesco, Model: PCBFL-64-30• Equipped with a high-efficiency electric motor and an optimized control system• Engineered for reliability and performance in demanding industrial environmentsThe 180° turning capability combined with its spring-loaded mechanism ensures smooth operation on uneven surfaces while protecting operators. This stacker effortlessly manages a variety of workloads, making it a dependable choice for increasing productivity. Discover more Wesco products in our collection at Wesco Collection and boost your material handling efficiency today.

Manufacturer: Zing, Manufacturer Part Number: 7804 Power Handle Lockout is made from ABS plastic and steel, and locks out handles up to 1". Accommodates 1 padlock with a shackle diameter up to 5/16".

Manufacturer: Vestil, Manufacturer Part Number: SWA-PMO-RFSemi–Automatic Stretch Wrap Machine Option – Powered Mast – Available with a 24V hand control to work with those taller loads. The hand held control is used to raise/lower the film while the foot control is used to operate the turntable. (Retrofit – Field Installed).