All

Manufacturer: UltraTech, Manufacturer Part Number: 7247 Twenty foot containment pans provide large targets for resin spills. The composite system can be built and designed to almost any length, depending on each site's needs. Constructed with high strength, nonporous, corrosion resistant fiberglass for years of reliable service. Low profile: 20' long x 4 7/8" high. Pandrol compatible. Rail side gasket sealing system prevents spills from leaking between pans and rails. Easy installation= minimal site preparation (no excavation required) required. Optional polyethylene (LLDPE) grating package available for safer foot traffic. ***REQUIRES SPECIAL SHIPPING, PLEASE CONTACT US***

Manufacturer: UltraTech, Manufacturer Part Number: 7560Capture plastic pellets and resin from railroad tankers. Ultra-Pellet Pan track pans have been specifically engineered to capture plastic pellets while allowing rainwater to drain out, preventing costly cleanup and regulatory fines. Sealed System- polyethylene gaskets keep spills from falling between the rails and pans. Economical and easy to install. Long work life- estimated to perform 20-30 years. Low maintenance- Ultra-Pellet Pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun. Low cost installation- lightweight Pellet Pans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required. Slip resistant surfaces- pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily. IMPORTANT- The Ultra-Pellet Pan will not contain liquids of any kind. Made in the USA.

Manufacturer: UltraTech, Manufacturer Part Number: 7562Capture plastic pellets and resin from railroad tankers. Ultra-Pellet Pan track pans have been specifically engineered to capture plastic pellets while allowing rainwater to drain out, preventing costly cleanup and regulatory fines. Sealed System- polyethylene gaskets keep spills from falling between the rails and pans. Economical and easy to install. Long work life- estimated to perform 20-30 years. Low maintenance- Ultra-Pellet Pans will not rust or corrode. Polyethylene resin is treated with a UV inhibitor, resists degrading effects of the sun. Low cost installation- lightweight Pellet Pans can be easily installed without heavy lifting equipment, i.e., forklifts, cranes, backhoes, etc. Minimal tools and labor required. Slip resistant surfaces- pans, grates and covers have been designed with safety in mind. All top surfaces resist slips when wet or oily. IMPORTANT- The Ultra-Pellet Pan will not contain liquids of any kind. Made in the USA.

Manufacturer: Vestil, Manufacturer Part Number: LAD-1-B-PUniform Capacity (pounds): 300, Top Step Height (in.): 10, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 1, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-1-W-PUniform Capacity (pounds): 300, Top Step Height (in.): 10, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 1, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-1-Y-PUniform Capacity (pounds): 300, Top Step Height (in.): 10, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 1, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-2-B-PUniform Capacity (pounds): 300, Top Step Height (in.): 18–3/4, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 2, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-2-W-PUniform Capacity (pounds): 300, Top Step Height (in.): 18–3/4, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 2, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-2-Y-PUniform Capacity (pounds): 300, Top Step Height (in.): 18–3/4, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 2, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-3-B-PUniform Capacity (pounds): 300, Top Step Height (in.): 28–1/2, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 3, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-3-W-PUniform Capacity (pounds): 300, Top Step Height (in.): 28–1/2, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 3, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-3-Y-PUniform Capacity (pounds): 300, Top Step Height (in.): 28–1/2, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 3, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

This heavy-duty Tip-N-Roll ladder offers industrial users a secure and efficient method for reaching high areas. Designed for everyday work as well as specialized applications, this 3-step ladder with perforated steps is perfect for anyone seeking tip-n-roll ladder options or industrial-use ladders. Manufactured by Vestil (Part# LAD-TRN-50-3-P), its design highlights ease of use, safety, and dependable performance in various work environments.Key Features Non-straddle base that ensures stability across diverse applications Smooth rolling mechanism for effortless movement Perforated steps that reduce weight while retaining durability Engineered with an ergonomic design and anti-slip surfaces for enhanced safety Technical Specifications & Benefits Material & Construction: Built from robust metal for standard industrial applications Work Environment: Ideal for warehouses, stockrooms, and maintenance areas Ease of Use: Designed for straightforward assembly and mobility, with features that facilitate debris drainage for cleaner operation This ladder’s innovative design boosts productivity by enabling quick and safe access to elevated work areas. Enjoy peace of mind knowing your equipment meets strict industrial standards. Discover additional industrial-grade solutions in our Tip-N-Roll Ladders collection.

Manufacturer: Vestil, Manufacturer Part Number: LAD-4-B-PUniform Capacity (pounds): 300, Top Step Height (in.): 38, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 4, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-4-W-PUniform Capacity (pounds): 300, Top Step Height (in.): 38, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 4, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-4-Y-PUniform Capacity (pounds): 300, Top Step Height (in.): 38, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 4, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-5-B-PUniform Capacity (pounds): 300, Top Step Height (in.): 47–1/2, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 5, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-5-W-PUniform Capacity (pounds): 300, Top Step Height (in.): 47–1/2, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 5, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Manufacturer: Vestil, Manufacturer Part Number: LAD-5-Y-PUniform Capacity (pounds): 300, Top Step Height (in.): 47–1/2, Step Angle (degrees): 57, Top Step Width (in.): 16, Top Step Depth (in.): 11, Step (excluding top step) Width (in.): 16, Step (excluding top step) Depth (in.): 8, Number of Steps: 5, Caster Diameter (in.): 1–1/2, Caster Width (in.): 3/4, Caster (quantity): 4, Caster Material: Phenolic, Step Type: Perforated, Construction: Steel, Finish: Powder Coat – Commercial users of rolling ladders now have an attractive and economical alternative to the traditional warehouse rolling ladders. This Commercial Spring Loaded Ladder has a sleek design, also provides maximum safety and convenience. The all directional spring–loaded swivel casters feature steel dome protection and include rubber pad bottoms to minimize movement. This ladder has perforated steps. The powder coat finish provides a durable attractive appearance.

Perforated Rack Deck Channels - Model RDCP36 offer a reliable solution for modern industrial storage and stringent safety compliance. Manufactured with precision, these channels adhere to essential NFPA and fire code standards while boosting airflow to sprinkler systems. Designed by Little Giant, they provide durability and dependability for demanding commercial and industrial applications.Key Benefits & Features• Constructed from 14-gauge perforated steel to ensure superior strength and longevity• 11-1/2″ wide deck sections enhance light, air, and water circulation• Available in three standard depths: 36″, 42″, and 48″ for flexible installations• Evenly distributes a load capacity of 500 lbs per channel• Finished with a robust powder coat that extends the product’s lifespanTechnical Specifications• Manufacturer: Little Giant (see our Little Giant Collection for more products)• Model & Part Number: RDCP-36• Dimensions: 11-1/2″ width with depth options of 36″, 42″, and 48″• Material: 14-gauge perforated steel with a durable powder coated finishInstallation & ComplianceThese perforated channels seamlessly integrate with pallet rack systems, offering strong support with an open design that improves visibility and airflow. Their compliance with fire safety codes, including NFPA, makes them a dependable choice for facilities emphasizing safety and operational efficiency. Ideal for warehouses, manufacturing plants, and industrial storage areas, the RDCP36 ensures straightforward installation and robust performance under varying load conditions.

Experience enhanced industrial safety with our premium perforated rack deck channels, model RDCP42 by Little Giant. Designed to meet NFPA and fire code requirements, these 14‑gauge channels offer robust durability while delivering superior airflow necessary for optimal sprinkler performance. The powder‑coated finish not only protects against wear but also ensures the channels maintain peak operational performance in demanding industrial environments.• 14‑gauge, powder‑coated steel construction for lasting durability• 11‑1/2″ wide sections available in 36″, 42″, and 48″ rack depths• 500 lbs evenly distributed capacity per channel• Perforated design promoting effective ventilation, drainage, and light flow• Compatible with 1‑5/8″ pallet rack step beams for enhanced securityIdeal for warehouse storage, industrial safety, and facility maintenance, these perforated rack deck channels boost operational efficiency and ensure safety compliance. They are the perfect industrial storage solution for protecting assets while meeting strict safety standards. Explore similar products in our Little Giant collection for comprehensive safety and material handling solutions.

Engineered for safe, efficient, and code-compliant installations, these perforated rack deck channels are critical for industrial storage setups. They are designed to optimize airflow, which enhances sprinkler performance while meeting NFPA and fire code requirements for secure material storage.Key Features Product width: 11-1/2″, offering improved visibility, airflow, and ease of maintenance Available rack depths: 36″, 42″, and 48″ to accommodate a variety of pallet rack configurations Made from perforated 14-gauge steel for enhanced durability Weight capacity: 500 lbs evenly distributed per channel for dependable support Finish: Long-lasting, powder-coated gray finish Manufacturer: Little Giant (Part Number: RDCP-48), ensuring quality and traceability Specifically designed to securely fit 1-5/8″ pallet rack step beams, sold individually The open, perforated design not only promotes the flow of air, light, and water but also streamlines routine inspections and maintenance. This smart design supports optimal environmental control and improves fire safety compliance. Its straightforward installation makes it a versatile solution for various industrial setups, ensuring your storage system stays both effective and reliable.Discover more premium Little Giant components in our Little Giant collection for additional spill response and industrial storage solutions.

Experience the confidence of a high-performance, durable material handling solution built to withstand the demands of industrial and commercial settings. Developed by Little Giant, the T710-P-1H-UPS model is designed to optimize operations with its sturdy construction and intelligent features, making it perfect for warehouses, factories, and spill management applications. Its perforated steel deck platform truck design ensures efficient drainage of debris and moisture, helping to maintain a clean and safe working environment.Key Features Smooth 12-Gauge Perforated Deck: Enables efficient drainage of debris and moisture, protecting your workspace. Edge Options: Pick between a 1-1/2″ lip for improved containment or flush edges for a sleek, seamless look, based on your requirements. Removable Pushbar Handle: Offers easy operation and quick maneuverability. Caster Configuration: Equipped with 2 swivel and 2 fixed casters for stable, multi-directional movement on various surfaces. All-Welded Construction: Comes fully assembled with robust build quality to meet the demands of industrial use. Durable Powder-Coated Finish: Provides long-lasting durability in challenging environments. Specifications Manufacturer: Little Giant Model: T710-P-1H-UPS Additional Details: Load capacity and deck dimensions will be provided soon—please inquire for more specifications. Boost your material handling efficiency today with this commercial platform truck for sale. To learn more about industrial solutions by Little Giant, visit the Little Giant Collection or check out our Platform Trucks selection for a full range of reliable products.

Introducing the T710-P-LU-UPS platform truck from Little Giant – a high-performance, industrial-grade solution designed to meet the demanding needs of modern material handling. This perforated steel deck platform truck is engineered to efficiently drain unwanted debris and moisture, ensuring a cleaner, safer work environment. Whether you're looking to buy a perforated platform truck or purchase the T710-P-LU-UPS for your facility, this model delivers durability and ease of use in one complete package.Key Features• Manufacturer: Little Giant (visit our Little Giant collection for more models)• Manufacturer Part Number: T710-P-LU-UPS• Deck: Smooth 12-gauge perforated steel deck engineered for effective drainage• Edge Options: Choose between a 1‑1/2″ retaining lip for added safety or flush edges for a sleek profile• Handle: Removable pushbar handle designed for effortless maneuverability• Caster Configuration: 2 swivel and 2 rigid casters for stable and controlled transport• Construction: Robust all‑welded assembly that ships fully assembled• Finish: Durable powder-coated finish for long-lasting protectionWhy Choose This Platform TruckIdeal for industrial, construction, and warehouse applications, the T710-P-LU-UPS platform truck ensures superior load management and safety. Its smart design promotes efficient material handling while enhancing overall operational productivity. Discover our range of top-rated products in our Platform Trucks collection and experience the quality that makes Spill 911 Inc. a trusted name in industrial solutions.Upgrade your facility with a platform truck that delivers on performance and reliability – order today and boost your operational efficiency.