All

Manufacturer: Bradley, Manufacturer Part Number: PED9572-203Lenox Pedestal Bench is constructed of 1 1/2in. HDPE material. Lenox Pedestal Bench is designed to resist moisture, rust, and delamination through a durable, vandal resistant construction. Constructed of Deep Blue 30% Pre Consumer High Density Polyethelene plastic. The Pedestal Bench configuration is 9 1/2in. wide. The Pedestal Bench configuration is 72in. long. The height of the Pedestal Bench is 18 1/2in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Vestil, Manufacturer Part Number: LOCK-CR-12This Coat Rod adds another dimension to your stainless steel lockers. Add the rod for hangers, bringing more versatility to the type of items stored in the locker. MFG Part# LOCK-CR-12

Manufacturer: Vestil, Manufacturer Part Number: LOCK-CR-18This Coat Rod adds another dimension to your stainless steel lockers. Add the rod for hangers, bringing more versatility to the type of items stored in the locker. MFG Part# LOCK-CR-18

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1260-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1260-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1260-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1260-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1260-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1260-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1272-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1272-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1272-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1272-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1272-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1272-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 12in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1560-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1560-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1560-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1560-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1560-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPST-S1560-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a slope top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 60in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1572-200Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Gray High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1572-202Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Beige High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: EPFT-S1572-203Locker End Panel is constructed of 3/8in. thick HDPE material. End Panel is designed to finish off the end run of lockers with a flat top. Constructed of Deep Blue High Density Polyethelene plastic. The Locker configuration is 15in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.