All

Manufacturer: Little Giant, Manufacturer Part Number: CS-3660-8MRHDThis versatile unit can be used as an independent platform truck for manual order picking and then quickly connected into a train of trailers. The caster steer design means wheels stay under the load at all times, providing better stability with unevenly distributed loads. The two swivel casters rotate 360°, providing excellent maneuverability even in tight areas. Reinforced 12 gauge steel deck is 11–1/2" high. Heavy service casters to withstand the rigors of towing 8" x 2" mold–on rubber wheels with cast iron centers and roller bearings. Removable pipe rack/pushbar handle extends 29" above the deck. Ring drawbar stays in upright position for manual operation as a platform truck. Pin and clevis coupler at rear. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: CSW-3660-8MRBuilt with a “T"–style pull handle for ergonomics and maneuverability. All–welded unit is constructed of a formed 12 gauge steel deck with 1–1/2" lip and extra reinforcement on the underside. Two swivel and two rigid casters with 8" x 2" mold–on rubber wheels. Handle swivels up and down and has vinyl hand grips. Durable powder coated finish. 2,000–lbs capacity. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: NBB-3660-8PY-2HHandles at both ends for load retention and versatility. Sturdy all–welded unit is constructed of a formed 12 gauge steel deck with extra reinforcement on the underside. Two removable pipe handles are 1–5/16" O.D. and have two cross–braces. Two swivel and two rigid 8" x 2" polyurethane casters. Durable powder coated finish. Ships fully assembled and ready for use. Capacity: 3,600–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: IPH-3660-8PHBKTop is formed from 3/16" steel and reinforced with 2" angle iron to withstand the most punishing applications. 2" angle corner posts and additional side braces increase stability. Heavy service casters have larger swivel raceway to handle extra capacity. Maneuvers on 4 swivel casters with 8" x 2" phenolic wheels and wheel brakes. Overall height 34". Capacity: 5,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: CD-3660-16PFD-CR8 wheels distribute the load over greater surface area. 16" x 4" pneumatic wheels are 4 ply with roller bearings and 1 inch axles. 12 gauge steel deck is available with flush edges. Ring Drawbar/T–Handle has 2–1/2" I.D. ring allows for intermittent low speed towing. Capacity: 3,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: DT-3660-DIA-4PSIdeal for transporting roll goods and other long, bulky loads. Removable 1–5/16" diameter pipe stakes extend 30" above the reinforced 12 gauge deck. Center mounted 12" x 2–1/2" load polyurethane wheels with two 8" x 2" swivel casters arranged in a diamond pattern. Deck is 14" high with 1/2" tilt. Capacity: 4,000–lbs. Dimensions: 36" x 60"

Manufacturer: Little Giant, Manufacturer Part Number: NBB-3660-6MRSturdy all–welded unit is constructed of a formed 12 gauge steel deck with extra reinforcement on underside. Removable pipe handle is 1–5/16" OD and has two crossbraces. Two swivel and two rigid 6" x 2" mold–on rubber casters. Durable powder coated finish. Ships fully assembled and ready for use. Capacity: 2,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: NBB-3660-8MRSturdy all–welded unit is constructed of a formed 12 gauge steel deck with extra reinforcement on underside. Removable pipe handle is 1–5/16" OD and has two crossbraces. Two swivel and two rigid 8" x 2" mold–on rubber casters. Durable powder coated finish. Ships fully assembled and ready for use. Capacity: 2,400–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: NBB-3660-8MRFLSturdy all–welded unit is constructed of a formed 12 gauge steel deck with extra reinforcement on underside. Removable pipe handle is 1–5/16" OD and has two crossbraces. Two swivel and two rigid 8" x 2" mold–on rubber casters. Durable powder coated finish. Ships fully assembled and ready for use. Capacity: 2,400–lbs. Includes floor lock which prevents unwanted movement when loading or unloading. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: NBB-3660-8PYBKSturdy all–welded unit is constructed of a formed 12 gauge steel deck with extra reinforcement on underside. Removable pipe handle is 1–5/16" OD and has two crossbraces. Two swivel and two rigid 8" x 2" polyurethane non–marking tread wheels with brakes. Durable powder coated finish. Ships fully assembled and ready for use. Capacity: 3,600–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: DT-3660-STrucks are formed into a solid unit with a 12 gauge steel deck welded to a structural steel frame. Sturdy removable pipe handle extends 29" above deck. Axle mounted load polyurethane wheels are 12" x 2–1/2", swivel caster wheels are 8" x 2". Deck height 14". Capacity: 4,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: CH-3660-12MRFifth wheel steering describes a type of steering where the front wheels and axle assembly pivot on a center point, which is referred to as the fifth wheel. Because the steering wheels encounter less friction when turning than would be encountered in a swivel caster, wagon trucks with fifth wheel steering can be easier to maneuver under heavier load conditions. This is especially true when softer, wider pneumatic wheels are required because of use on rough or uneven surfaces. Wagon Trucks with this type of steering are typically pulled, but can also be pushed. T–handle with vinyl handgrips allows two man operation. Heavy 12 gauge reinforced steel decks with 1–1/2" retaining lip. 12" x 2–1/2" Mold–on Rubber Wheels. 3,500–lbs Capacity. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: CH-3660-12MR-FSDFifth wheel steering describes a type of steering where the front wheels and axle assembly pivot on a center point, which is referred to as the fifth wheel. Because the steering wheels encounter less friction when turning than would be encountered in a swivel caster, wagon trucks with fifth wheel steering can be easier to maneuver under heavier load conditions. This is especially true when softer, wider pneumatic wheels are required because of use on rough or uneven surfaces. Wagon Trucks with this type of steering are typically pulled, but can also be pushed. T–handle with vinyl handgrips allows two man operation. Heavy 12 gauge reinforced steel decks are flush. 12" x 2–1/2" Mold–on Rubber Wheels. 3,500–lbs Capacity. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: CH-3660-12PFifth wheel steering describes a type of steering where the front wheels and axle assembly pivot on a center point, which is referred to as the fifth wheel. Because the steering wheels encounter less friction when turning than would be encountered in a swivel caster, wagon trucks with fifth wheel steering can be easier to maneuver under heavier load conditions. This is especially true when softer, wider pneumatic wheels are required because of use on rough or uneven surfaces. Wagon Trucks with this type of steering are typically pulled, but can also be pushed. T–handle with vinyl handgrips allows two man operation. Heavy 12 gauge reinforced steel decks with 1–1/2" retaining lip. 12" x 3–1/2" Pneumatic Wheels. 2,000–lbs Capacity. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: CH-3660-12P-FSDFifth wheel steering describes a type of steering where the front wheels and axle assembly pivot on a center point, which is referred to as the fifth wheel. Because the steering wheels encounter less friction when turning than would be encountered in a swivel caster, wagon trucks with fifth wheel steering can be easier to maneuver under heavier load conditions. This is especially true when softer, wider pneumatic wheels are required because of use on rough or uneven surfaces. Wagon Trucks with this type of steering are typically pulled, but can also be pushed. T–handle with vinyl handgrips allows two man operation. Heavy 12 gauge reinforced steel decks are flush. 12" x 3–1/2" Pneumatic Wheels. 2,000–lbs Capacity. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: CH-3660-16PFifth wheel steering describes a type of steering where the front wheels and axle assembly pivot on a center point, which is referred to as the fifth wheel. Because the steering wheels encounter less friction when turning than would be encountered in a swivel caster, wagon trucks with fifth wheel steering can be easier to maneuver under heavier load conditions. This is especially true when softer, wider pneumatic wheels are required because of use on rough or uneven surfaces. Wagon Trucks with this type of steering are typically pulled, but can also be pushed. T–handle with vinyl handgrips allows two man operation. Heavy 12 gauge reinforced steel decks with 1–1/2" retaining lip. 16" x 4" Pneumatic Wheels. 3,000–lbs Capacity. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: CH-3660-16P-FSDFifth wheel steering describes a type of steering where the front wheels and axle assembly pivot on a center point, which is referred to as the fifth wheel. Because the steering wheels encounter less friction when turning than would be encountered in a swivel caster, wagon trucks with fifth wheel steering can be easier to maneuver under heavier load conditions. This is especially true when softer, wider pneumatic wheels are required because of use on rough or uneven surfaces. Wagon Trucks with this type of steering are typically pulled, but can also be pushed. T–handle with vinyl handgrips allows two man operation. Heavy 12 gauge reinforced steel decks are flush. 16" x 4" Pneumatic Wheels. 3,000–lbs Capacity. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: SCN-3660-6PHThe small 3/4" x 1–1/2" diamond shaped openings and heavy gauge of the flattened expanded metal on this truck provide maximum security for even the smallest items, while still allowing good visibility and air circulation. The double doors swing open a full 270 degrees, back to the sides and out of the way, and feature padlockable hasp. Interior height 48", overall height 56" with 2 swivel and 2 rigid, 6" x 2" phenolic wheels. Capacity: 2,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: SCN-3660-6PPYThe small 3/4" x 1–1/2" diamond shaped openings and heavy gauge of the flattened expanded metal on this truck provide maximum security for even the smallest items, while still allowing good visibility and air circulation. The double doors swing open a full 270 degrees, back to the sides and out of the way, and feature padlockable hasp. Interior height 48", overall height 56" with 2 swivel and 2 rigid, 6" x 2" non–marking polyurethane wheels. Capacity: 2,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: SC-3660-6PHThe small 3/4" x 1–1/2" diamond shaped openings and heavy gauge of the flattened expanded metal on this truck provide maximum security for even the smallest items, while still allowing good visibility and air circulation. The double doors swing open a full 270 degrees, back to the sides and out of the way, and feature padlockable hasp. Interior height 48", overall height 56" with 2 swivel and 2 rigid, 6" x 2" phenolic wheels. Comes with a center shelf. Capacity: 2,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: SC-3660-6PPYThe small 3/4" x 1–1/2" diamond shaped openings and heavy gauge of the flattened expanded metal on this truck provide maximum security for even the smallest items, while still allowing good visibility and air circulation. The double doors swing open a full 270 degrees, back to the sides and out of the way, and feature padlockable hasp. Interior height 48", overall height 56" with 2 swivel and 2 rigid, 6" x 2" non–marking polyurethane wheels. Comes with a center shelf. Capacity: 2,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: WW3660-HD-6PHFLMove these Heavy Duty Workbenches easily with two swivel and two rigid 6" x 2" phenolic casters. When in the desired position, engage the floor lock between the swivel casters to avoid unwanted movement. 7 gauge reinforced steel top with rounded comfort edges. Heavy 2" x 2" angle legs are 1/4" thick with 7 gauge welded gussets. Workbench comes with a 26"W x 20"D x 6"H (Center Mount) drawer with padlock hasp. All models have 34" Bench Top height. Capacity: 3,600–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: WW3660-6PHFLMove these Heavy Duty Workbenches easily with two swivel and two rigid 6" x 2" phenolic casters. When in the desired position, engage the floor lock between the swivel casters to avoid unwanted movement. 7 gauge reinforced steel top with rounded comfort edges. Heavy 2" x 2" angle legs are 1/4" thick with 7 gauge welded gussets. All models have 34" Bench Top height. Capacity: 3,600–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: BRT-3660-8PHBKRugged, all–welded construction with 3 load levels. Structural channel uprights with 1–1/2" square tube arms have 4–1/2" high stops on ends for load retention. 12 gauge steel lower deck stores and transports smaller part, packages, etc. Platform height 11", overall height 58". Four swivel casters for maneuverability with 8" x 2" phenolic wheels for ease of movement. Wheel brakes on all four wheels to help prevent unwanted movement. Capacity 3600 lbs. overall, 2000 lbs. per level evenly distributed. Horizontal storage space (each side): Top = 7–1/2", Middle = 11", Bottom = 15". Deck Size: 36" x 60".