All

Manufacturer: Little Giant, Manufacturer Part Number: CH-3660-16PFifth wheel steering describes a type of steering where the front wheels and axle assembly pivot on a center point, which is referred to as the fifth wheel. Because the steering wheels encounter less friction when turning than would be encountered in a swivel caster, wagon trucks with fifth wheel steering can be easier to maneuver under heavier load conditions. This is especially true when softer, wider pneumatic wheels are required because of use on rough or uneven surfaces. Wagon Trucks with this type of steering are typically pulled, but can also be pushed. T–handle with vinyl handgrips allows two man operation. Heavy 12 gauge reinforced steel decks with 1–1/2" retaining lip. 16" x 4" Pneumatic Wheels. 3,000–lbs Capacity. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: CH-3660-16P-FSDFifth wheel steering describes a type of steering where the front wheels and axle assembly pivot on a center point, which is referred to as the fifth wheel. Because the steering wheels encounter less friction when turning than would be encountered in a swivel caster, wagon trucks with fifth wheel steering can be easier to maneuver under heavier load conditions. This is especially true when softer, wider pneumatic wheels are required because of use on rough or uneven surfaces. Wagon Trucks with this type of steering are typically pulled, but can also be pushed. T–handle with vinyl handgrips allows two man operation. Heavy 12 gauge reinforced steel decks are flush. 16" x 4" Pneumatic Wheels. 3,000–lbs Capacity. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: SCN-3660-6PHThe small 3/4" x 1–1/2" diamond shaped openings and heavy gauge of the flattened expanded metal on this truck provide maximum security for even the smallest items, while still allowing good visibility and air circulation. The double doors swing open a full 270 degrees, back to the sides and out of the way, and feature padlockable hasp. Interior height 48", overall height 56" with 2 swivel and 2 rigid, 6" x 2" phenolic wheels. Capacity: 2,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: SCN-3660-6PPYThe small 3/4" x 1–1/2" diamond shaped openings and heavy gauge of the flattened expanded metal on this truck provide maximum security for even the smallest items, while still allowing good visibility and air circulation. The double doors swing open a full 270 degrees, back to the sides and out of the way, and feature padlockable hasp. Interior height 48", overall height 56" with 2 swivel and 2 rigid, 6" x 2" non–marking polyurethane wheels. Capacity: 2,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: SC-3660-6PHThe small 3/4" x 1–1/2" diamond shaped openings and heavy gauge of the flattened expanded metal on this truck provide maximum security for even the smallest items, while still allowing good visibility and air circulation. The double doors swing open a full 270 degrees, back to the sides and out of the way, and feature padlockable hasp. Interior height 48", overall height 56" with 2 swivel and 2 rigid, 6" x 2" phenolic wheels. Comes with a center shelf. Capacity: 2,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: SC-3660-6PPYThe small 3/4" x 1–1/2" diamond shaped openings and heavy gauge of the flattened expanded metal on this truck provide maximum security for even the smallest items, while still allowing good visibility and air circulation. The double doors swing open a full 270 degrees, back to the sides and out of the way, and feature padlockable hasp. Interior height 48", overall height 56" with 2 swivel and 2 rigid, 6" x 2" non–marking polyurethane wheels. Comes with a center shelf. Capacity: 2,000–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: WW3660-HD-6PHFLMove these Heavy Duty Workbenches easily with two swivel and two rigid 6" x 2" phenolic casters. When in the desired position, engage the floor lock between the swivel casters to avoid unwanted movement. 7 gauge reinforced steel top with rounded comfort edges. Heavy 2" x 2" angle legs are 1/4" thick with 7 gauge welded gussets. Workbench comes with a 26"W x 20"D x 6"H (Center Mount) drawer with padlock hasp. All models have 34" Bench Top height. Capacity: 3,600–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: WW3660-6PHFLMove these Heavy Duty Workbenches easily with two swivel and two rigid 6" x 2" phenolic casters. When in the desired position, engage the floor lock between the swivel casters to avoid unwanted movement. 7 gauge reinforced steel top with rounded comfort edges. Heavy 2" x 2" angle legs are 1/4" thick with 7 gauge welded gussets. All models have 34" Bench Top height. Capacity: 3,600–lbs. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: BRT-3660-8PHBKRugged, all–welded construction with 3 load levels. Structural channel uprights with 1–1/2" square tube arms have 4–1/2" high stops on ends for load retention. 12 gauge steel lower deck stores and transports smaller part, packages, etc. Platform height 11", overall height 58". Four swivel casters for maneuverability with 8" x 2" phenolic wheels for ease of movement. Wheel brakes on all four wheels to help prevent unwanted movement. Capacity 3600 lbs. overall, 2000 lbs. per level evenly distributed. Horizontal storage space (each side): Top = 7–1/2", Middle = 11", Bottom = 15". Deck Size: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: 4SH-3660-72Reinforced 12 gauge steel shelves with 2000 lb. capacity per shelf. 2" x 2" x 3/16" corner angles have footpads with anchor. 72" overall height with 3–1/2" bottom shelf under clearance. Ships set up and ready for immediate use. This unit comes with 4 shelves with 20–3/4" shelf clearance. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: 5SH-3660-72Reinforced 12 gauge steel shelves with 2000 lb. capacity per shelf. 2" x 2" x 3/16" corner angles have footpads with anchor. 72" overall height with 3–1/2" bottom shelf under clearance. Ships set up and ready for immediate use. This unit comes with 5 shelves with 15" shelf clearance. Dimensions: 36" x 60".

Manufacturer: Little Giant, Manufacturer Part Number: APT6W-3672-6PYPerfect for moving plywood, drywall, or any sheet products in tight quarters. Six wheel design ensures high maneuverability and “zero turn" capability. Rolls smoothly on 6" non–marking Polyurethane wheels. Includes two heavy duty uprights that extend 27" above the deck and are adjustable in four positions. Capacity: 3,600–lbs. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: NB6W-3672-6PYReinforced 12 gauge steel deck has center mounted rigid casters for a tighter turning radius. 6" x 2" Polyurethane swivel casters under all 4 corners provide greater load support and stability. Removable pipe handle with crossbraces extends 29" high above the deck. Dimensions: 36" x 72". Capacity: 3,600–lbs.

Manufacturer: Little Giant, Manufacturer Part Number: CD-3672-16P-CR8 wheels distribute the load over greater surface area. 16" x 4" pneumatic wheels are 4 ply with roller bearings and 1 inch axles. 12 gauge steel deck is available with a 1–1/2" retaining lip. Ring Drawbar/T–Handle has 2–1/2" I.D. ring allows for intermittent low speed towing. Capacity: 3,000–lbs. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: APT-3672-6PHIdeal for large or small quantities of plywood, drywall, or other sheet material. Includes two heavy duty uprights that extend 27" above the deck and can be placed in any of four positions. Also great for rolled goods, office partition panels, folding tables or use as a standard platform truck. Two rigid and two swivel casters with 6" x 2" Phenolic Wheels. Capacity: 3,600–lbs. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: APT-3672-6PYIdeal for large or small quantities of plywood, drywall, or other sheet material. Includes two heavy duty uprights that extend 27" above the deck and can be placed in any of four positions. Also great for rolled goods, office partition panels, folding tables or use as a standard platform truck. Two rigid and two swivel casters with 6" x 2" Non–marking Polyurethane Wheels. Capacity: 3,600–lbs. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: APT-3672-6MRIdeal for large or small quantities of plywood, drywall, or other sheet material. Includes two heavy duty uprights that extend 27" above the deck and can be placed in any of four positions. Also great for rolled goods, office partition panels, folding tables or use as a standard platform truck. Two rigid and two swivel casters with 6" x 2" Mold–On Rubber Wheels. Capacity: 3,600–lbs. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: SLN-3672Secure, visible storage for larger, bulkier items. 13 gauge expanded metal has small 3/4" x 1–1/2" diamond–shaped openings. Doors swing open a full 270 degrees, back to the sides and out of the way. 4" underclearance for transporting with pallet truck or fork lift. 72" interior height, 78" overall height. Welded unit ships set up and ready for immediate use. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: CS-3672-8MRHDThis versatile unit can be used as an independent platform truck for manual order picking and then quickly connected into a train of trailers. The caster steer design means wheels stay under the load at all times, providing better stability with unevenly distributed loads. The two swivel casters rotate 360°, providing excellent maneuverability even in tight areas. Reinforced 12 gauge steel deck is 11–1/2" high. Heavy service casters to withstand the rigors of towing 8" x 2" mold–on rubber wheels with cast iron centers and roller bearings. Removable pipe rack/pushbar handle extends 29" above the deck. Ring drawbar stays in upright position for manual operation as a platform truck. Pin and clevis coupler at rear. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: NBB-3672-10PIdeal for use over rough and uneven floor surfaces. 4–ply 10" x 3.5" full pneumatic wheels absorb shock and reduce vibration. Inflation pressure of tires can be adjusted to provide desired level of cushion. Removable crossbar handle and 2 rigid, 2 swivel casters. Capacity: 1,500–lbs. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: NBB-3672-10SRThese trucks feature soft, solid rubber tires that can't go flat. Well suited for use over rough surfaces, yet easier to move under heavier loads than pneumatic tired trucks. They also require less maintenance than pneumatic tires. Removable crossbar handle and 2 rigid, 2 swivel 10" x 2.75" casters. Capacity: 1,500–lbs. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: NBB-3672-9PIdeal for use over rough and uneven floor surfaces. 4–ply 9" x 3" full pneumatic wheels absorb shock and reduce vibration. Inflation pressure of tires can be adjusted to provide desired level of cushion. Removable crossbar handle and 2 rigid, 2 swivel casters. Capacity: 1,200–lbs. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: NBB-3672-8PY-2HHandles at both ends for load retention and versatility. Sturdy all–welded unit is constructed of a formed 12 gauge steel deck with extra reinforcement on the underside. Two removable pipe handles are 1–5/16" O.D. and have two cross–braces. Two swivel and two rigid 8" x 2" polyurethane casters. Durable powder coated finish. Ships fully assembled and ready for use. Capacity: 3,600–lbs. Dimensions: 36" x 72".

Manufacturer: Little Giant, Manufacturer Part Number: IPH-3672-8PHBKTop is formed from 3/16" steel and reinforced with 2" angle iron to withstand the most punishing applications. 2" angle corner posts and additional side braces increase stability. Heavy service casters have larger swivel raceway to handle extra capacity. Maneuvers on 4 swivel casters with 8" x 2" phenolic wheels and wheel brakes. Overall height 34". Capacity: 5,000–lbs. Dimensions: 36" x 72".