All

Manufacturer: Hughes, Manufacturer Part Number: SD31K45GIncorporates eight PVC spray nozzles to facilitate a high flow rate decontamination process Integral drain sump and strip screens fitted to entrance reduce the risk of surplus contaminated water outside of the cubicle area ANSI compliant eye/face wash with integral, durable acrylic capped ABS lid protects against dust and debris—activate by simply pulling down the cover Designed for locations where space is at a premium or the emergency safety shower needs to be enclosed, this multi-nozzle decontamination cubicle shower helps prevent overspray and is activated by foot panel upon entry. The cubicle shower has a stainless steel hollow section frame enclosed in GRP sheeting with stainless steel pipes for corrosion resistance and extended life. The exterior sheeting includes universal pictogram signs and green and white safety stripes. Mounted on the exterior side of the cubicle for maximum shower effectiveness, the eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Covered bowl also ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. The system features specially designed, high-performance quarter-turn ball valves made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Includes an inspection record tag for recording test and service history.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Foot Panel Activated, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Stainless Steel Frame with GRP Paneling, Nozzles: PVC

Manufacturer: Hughes, Manufacturer Part Number: SD31K45G-PUMPIncorporates eight PVC spray nozzles to facilitate a high flow rate decontamination process Integral drain sump and strip screens fitted to entrance reduce the risk of surplus contaminated water outside of the cubicle area ANSI compliant eye/face wash with integral, durable acrylic capped ABS lid protects against dust and debris—activate by simply pulling down the cover Submersible pump in cubicle sump prevents overflow by pumping waste water to a drain Designed for locations where space is at a premium or the emergency safety shower needs to be enclosed, this multi-nozzle decontamination cubicle shower helps prevent overspray and is activated by foot panel upon entry. The cubicle shower has a stainless steel hollow section frame enclosed in GRP sheeting with stainless steel pipes for corrosion resistance and extended life. The exterior sheeting includes universal pictogram signs and green and white safety stripes. Sump pump incorporates an integral float switch, which provides automatic pump control in the form of a low level cut out to prevent the risk of running dry—120V, 60 Hz suitable for general purpose areas. Mounted on the exterior side of the cubicle for maximum shower effectiveness, the eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Covered bowl also ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. The system features specially designed, high-performance quarter-turn ball valves made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Includes an inspection record tag for recording test and service history.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Foot Panel Activated, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Stainless Steel Frame with GRP Paneling, Nozzles: PVC

Manufacturer: Hughes, Manufacturer Part Number: SD32K45GIntegral drain sump and strip screens fitted to entrance reduce the risk of surplus contaminated water outside of the cubicle area Eye/face wash with integral, durable acrylic capped ABS lid protects against dust and debris—activate by simply pulling down the cover Designed for locations where space is at a premium or the emergency safety shower needs to be enclosed, this all-in-one ANSI-compliant combination cubicle shower and eye/face wash helps prevent overspray and is activated by hand upon entry. The cubicle shower has a stainless steel hollow section frame enclosed in GRP sheeting with stainless steel pipes for corrosion resistance and extended life. The exterior sheeting includes universal pictogram signs and green and white safety stripes. Mounted on the inside of the cubicle for maximum benefit, the eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Covered bowl also ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. The system features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Includes an inspection record tag for recording test and service history.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Lever, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Stainless Steel Frame with GRP Paneling

Manufacturer: Hughes, Manufacturer Part Number: SD32K45G-PUMPIntegral drain sump and strip screens fitted to entrance reduce the risk of surplus contaminated water outside of the cubicle area Eye/face wash with integral, durable acrylic capped ABS lid protects against dust and debris—activate by simply pulling down the cover Submersible pump in cubicle sump prevents overflow by pumping waste water to a drain Designed for locations where space is at a premium or the emergency safety shower needs to be enclosed, this all-in-one ANSI-compliant combination cubicle shower and eye/face wash helps prevent overspray and is activated by hand upon entry. The cubicle shower has a stainless steel hollow section frame enclosed in GRP sheeting with stainless steel pipes for corrosion resistance and extended life. The exterior sheeting includes universal pictogram signs and green and white safety stripes. Sump pump incorporates an integral float switch, which provides automatic pump control in the form of a low level cut out to prevent the risk of running dry—120V, 60 Hz suitable for general purpose areas. Mounted on the inside of the cubicle for maximum benefit, the eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Covered bowl also ensures that the eyewash nozzles and bowl remain clean and free from contamination at all times—no dust covers needed. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. The system features a specially designed, high-performance quarter-turn ball valve made of 316L stainless steel to endure the harshest environments and site conditions. Low operating torque to open valve offers reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Includes an inspection record tag for recording test and service history.SPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Shower: Pull Lever, Eye/Face wash: Pull Lid ForwardMaterial Specifications: Stainless Steel Frame with GRP Paneling

Manufacturer: Hughes, Manufacturer Part Number: QS1200An integral immersion heater, 110V general purpose rated, controlled by a dual safety thermostat, maintains the water in the insulated tank at a constant tepid temperature Rectangular hollow section galvanized steel frames are designed and built to be earthquake-proof and conform to the California Building Code Internally mounted, covered eye/face wash unit protects against dust and debris—activate by lifting the lid Low-pressure shower rose delivers large quantities of water in an even pattern that is non-injurious to the user External water level indicator provides visibility to tank levels Ready for quick delivery—packed for economical shipment and assembly on-site Emergency tank showers are essential to providing safe working conditions where insufficient water pressure exists or when it is impractical to use a plumbed-in safety shower. The 317 gallon (1200 liter) model provides tepid water even when there is no mains water supply. In an emergency, the shower actives quickly with a simple push of the panic bar. Intended for use in applications within a termperature range of 14 °F(-10 °C) to 104 °(40 °C). Assebmly required. Electrical supply: 110V Single Phase, 60/50Hz Note: This tank shower is ANSI compliant for the 15 minute time requirement only when connected to a plumbed water source.SPECIFICATIONSEye/Face Wash Bowl Material: GRP CompositeActivation: Shower: Push Bar, Eye/Face wash: Lift Lid UpMaterial Specifications: Frame: Galvanized Steel, Tank: Medium Density Polyethylene, Tank Casing and Lid: Heavy-duty GRP, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: QS2000An integral immersion heater, 110V general purpose rated, controlled by a dual safety thermostat, maintains the water in the insulated tank at a constant tepid temperature Rectangular hollow section galvanized steel frames are designed and built to be earthquake-proof and conform to the California Building Code Internally mounted, covered GRP composite eye/face wash unit protects against dust and debris—activate by lifting the lid Low-pressure shower rose delivers large quantities of water in an even pattern that is non-injurious to the user External water level indicator provides visibility to tank levels Ready for quick delivery—packed for economical shipment and assembly on-site Emergency tank showers are essential to providing safe working conditions where insufficient water pressure exists or when it is impractical to use a plumbed-in safety shower. The 528 gallon (2000 liter) shower is designed to meet and exceed ANSI and European standards by providing tepid water for over 15 minutes at a guaranteed flow of 20 US gallons (76 liters) per minute, even when there is no mains water supply. In an emergency, the shower actives quickly with a simple push of the panic bar. Intended for use in applications within a termperature range of 14 °F(-10 °C) to 104 °(40 °C). Assebmly required. Electrical supply: 110V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: GRP CompositeActivation: Shower: Push Bar, Eye/Face wash: Lift Lid UpMaterial Specifications: Frame: Galvanized Steel, Tank: Medium Density Polyethylene, Tank Casing and Lid: Heavy-duty GRP, Nozzle: Nylon 6

Manufacturer: Hughes, Manufacturer Part Number: SERVICE-CARDSProvides a means to document comprehensive service/test history for the life of the unit Helps make identifying the site location and model simple Plastic material ensures written records will last, even when exposed to water Package includes two blank tags with space for twenty-six service records Regular servicing and testing of Emergency Safety Showers and Eye/Facewash units is critical to ensuring proper functionality in the event of an emergency. Depending on the location and company procedures you may test daily or weekly and carry out servicing every 3, 6 or 12 months. Each time the equipment is tested or serviced in accordance with the agreed schedule, the person responsible dates and signs the tag. Most Justrite shower and eye/facewashes come with an inspection record and holder, which can be attached to the shower or positioned close by where it can be readily available. When the tag is full, simply remove it from the holder and replace with a new inspection record. As a best practice, completed tags should be kept as a record of testing and servicing.SPECIFICATIONSMaterial Specifications: Plastic

Manufacturer: Hughes, Manufacturer Part Number: H45GP-1HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Covered acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes Includes a separate 10 x 12-in (254 x 305-mm) universal eyewash sign for enhanced visibility, as well as an inspection record tag for recording test and service history Meets ANSI and EN 15154 standards and supports OSHA requirements. This freeze protected and insulated eye/face wash is intended for use where there is a possibility of the water freezing due to extreme cold climates. Pedestal-mounted eye/face wash unit, designed at ANSI-compliant height, is generally located in open areas away from walls. These freeze protected models are trace-tape heated and insulated, suitable for use in both Class 1 Division 2 hazardous areas, as well as non-hazardous areas. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of activation. Some assembly may be required. Electrical supply: 120V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Pull Down on LidMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H45GP-2HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Covered acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes Includes a separate 10 x 12-in (254 x 305-mm) universal eyewash sign for enhanced visibility, as well as an inspection record tag for recording test and service history Meets ANSI and EN 15154 standards and supports OSHA requirements. This freeze protected and insulated eye/face wash is intended for use where there is a possibility of the water freezing due to extreme cold climates. Pedestal-mounted eye/face wash unit, designed at ANSI-compliant height, is generally located in open areas away from walls. These freeze protected models are trace-tape heated and insulated, suitable for use in both Class 1 Division 2 hazardous areas, as well as non-hazardous areas. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Solid construction using galvanized mild steel pipework. Add optional foot treadle for a secondary means of activation. Some assembly may be required. Electrical supply: 240V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Pull Down on LidMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H45GSP-1HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Covered acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes Includes a separate 10 x 12-in (254 x 305-mm) universal eyewash sign for enhanced visibility, as well as an inspection record tag for recording test and service history Meets ANSI and EN 15154 standards and supports OSHA requirements. This freeze protected and insulated eye/face wash is intended for use where there is a possibility of the water freezing due to extreme cold climates. Pedestal-mounted eye/face wash unit, designed at ANSI-compliant height, is generally located in open areas away from walls. These freeze protected models are trace-tape heated and insulated, suitable for use in both Class 1 Division 2 hazardous areas, as well as non-hazardous areas. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for improved corrosion resistance. Add optional foot treadle for a secondary means of activation. Some assembly may be required. Electrical supply: 120V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Pull Down on LidMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: H45GSP-2HFor cold climates with a minimum ambient operating temperature of -4 °F (-20 °C) or above—trace tape heating with polyethylene jacket and polyurethane foam insulation improve frost protection and strength Covered acrylic-capped ABS eye/face wash protects the bowl and eyewash diffusers from dust and debris—no dust covers needed Diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes Includes a separate 10 x 12-in (254 x 305-mm) universal eyewash sign for enhanced visibility, as well as an inspection record tag for recording test and service history Meets ANSI and EN 15154 standards and supports OSHA requirements. This freeze protected and insulated eye/face wash is intended for use where there is a possibility of the water freezing due to extreme cold climates. Pedestal-mounted eye/face wash unit, designed at ANSI-compliant height, is generally located in open areas away from walls. These freeze protected models are trace-tape heated and insulated, suitable for use in both Class 1 Division 2 hazardous areas, as well as non-hazardous areas. Made of durable, corrosion-resistant acrylic capped ABS, the eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Solid construction using stainless steel pipework for improved corrosion resistance. Add optional foot treadle for a secondary means of activation. Some assembly may be required. Electrical supply: 240V Single Phase, 60/50HzSPECIFICATIONSEye/Face Wash Bowl Material: Acrylic-Capped ABS PlasticActivation: Pull Down on LidMaterial Specifications: Polyurethane foam insulation with a medium density polyethylene impact resistant outer casing, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 45GPCovered bowl ensures that the nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Durable, corrosion-resistant acrylic capped ABS construction Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face. Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 and EN 15154 standards, supports OSHA requirements Wall-mounted eye/face wash with high, ANSI-compliant flow rate is suitable for use in all applications not subject to the possibility of freezing or overheating. Solid construction using galvanized mild steel pipework. The eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Add optional foot treadle for a secondary means of activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: White Acrylic-Capped ABS PlasticActivation: Pull Down on LidMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 45GSPCovered bowl ensures that the nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Durable, corrosion-resistant acrylic capped ABS construction Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 and EN 15154 standards, supports OSHA requirements Wall-mounted eye/face wash with high, ANSI-compliant flow rate is suitable for use in all applications not subject to the possibility of freezing or overheating. Solid construction using stainless steel pipework for added improved corrosion resistance. The eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident. Add optional foot treadle for a secondary means of activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: White Acrylic-Capped ABS PlasticActivation: Pull Down on LidMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 75GPTwin spray nozzles protected by dust covers that pop-off when eye wash is activated Diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eyewash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI and EN 15154 standards and supports OSHA requirements Pedestal-mounted, open ABS plastic bowl eye/face wash unit, designed at ANSI-compliant height, is generally located in open areas away from walls. Suitable for use in all applications not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Solid construction using galvanized mild steel pipework. Easy activation—highly visible red push plate with universal hand and eye wash sign. Add optional foot treadle for a secondary means of activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Yellow ABS PlasticActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 75GSPTwin spray nozzles protected by dust covers that pop-off when eye wash is activated Diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eyewash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI and EN 15154 standards and supports OSHA requirements Pedestal-mounted, open ABS plastic bowl eye/face wash unit, designed at ANSI-compliant height, is generally located in open areas away from walls. Suitable for use in all applications not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Solid construction using stainless steel pipework for improved corrosion resistance. Easy activation—highly visible red push plate with universal hand and eye wash sign. Add optional foot treadle for a secondary means of activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Yellow ABS PlasticActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 85GPTwin spray nozzles protected by dust covers that pop-off when eye wash is activated Diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eyewash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI and EN 15154 standards and supports OSHA requirements Pedestal-mounted, open stainless steel bowl eye/face wash unit, designed at ANSI-compliant height, is generally located in open areas away from walls. Suitable for use in all applications not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Solid construction using galvanized mild steel pipework. Easy activation—highly visible red push plate with universal hand and eye wash sign. Add optional foot treadle for a secondary means of activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Stainless SteelActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 85GSPTwin spray nozzles protected by dust covers that pop-off when eye wash is activated Diffusers fitted with fine mesh strainers and a flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eyewash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI and EN 15154 standards and supports OSHA requirements Pedestal-mounted, open stainless steel bowl eye/face wash unit, designed at ANSI-compliant height, is generally located in open areas away from walls. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Suitable for use in all applications not subject to the possibility of freezing or overheating. Solid construction using stainless steel pipework for improved corrosion resistance. Easy activation—highly visible red push plate with universal hand and eye wash sign. Add optional foot treadle for a secondary means of activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Stainless SteelActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 45GEWCovered bowl ensures that the nozzles and bowl remain clean and free from contamination at all times—no dust covers needed Durable, corrosion-resistant acrylic capped ABS construction Twin aerated diffusers with fine mesh strainers and an individual flow controller provide a soft, scrubbing action to the eyes and face. Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 and EN 15154 standards, supports OSHA requirements Wall-mounted eye/face wash with high, ANSI-compliant flow rate is suitable for use in all applications not subject to the possibility of freezing or overheating. The eye/face wash incorporates an integral lid connected to the water valve for automatic operation—activate by simply pulling down the lid. Easy-to-reach flow regulator valve positioned on side of bowl adjusts to suit the severity of the accident.SPECIFICATIONSEye/Face Wash Bowl Material: White Acrylic-Capped ABS PlasticActivation: Pull Down on LidMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 75GEWTwin spray nozzles protected by dust covers that pop-off when eye wash is activated via the push plate Diffusers fitted with fine mesh strainers and an individual flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 and EN 15154 standards, supports OSHA requirements This wall-mounted eye/face wash with open ABS plastic bowl is suitable for use in all applications not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure.SPECIFICATIONSEye/Face Wash Bowl Material: Yellow ABS PlasticActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: 85GEWTwin spray nozzles protected by dust covers that pop-off when eye wash is activated via the push plate Diffusers fitted with fine mesh strainers and an individual flow controller provide a gentle flow of aerated water and prevent further injury to the eyes High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 10 x 12-in (254 x 305-mm) universal eye wash sign for enhanced visibility, as well as an inspection record tag for recording service and test history Meets ANSI Z358.1 and EN 15154 standards, supports OSHA requirements This wall-mounted eye/face wash with open stainless steel bowl is suitable for use in all applications not subject to the possibility of freezing or overheating. The system features a specially designed valve that includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure.SPECIFICATIONSEye/Face Wash Bowl Material: Stainless SteelActivation: Push PlateMaterial Specifications: Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: OPT100Fitted with pop-off dust cover, a non-return valve and flow regulator Complete with 4.9-feet (1.5-m) of reinforced hose, particularly useful for treating disabled personnel Lock-on actuating button for ease of use Wall mounted handheld drench hose with in-line single nozzle for hazardous environments where there is a risk of small spillages of chemicals or dangerous substances. Includes an inspection record tag for recording test and service history.SPECIFICATIONSActivation: Squeeze grip operated with lock-on actuating buttonMaterial Specifications: Body: Polyarylamide (reinforced with glass fibers), Nozzles: Powder coated brass, Eye Cups: EPDM

Manufacturer: Hughes, Manufacturer Part Number: OPT500Fitted with pop-off dust covers, a non-return valve and flow regulator Complete with 4.9-feet (1.5-m) of reinforced hose, particularly useful for treating disabled personnel Lock-on actuating button for ease of use Wall mounted hand-held eye/face wash with 45 degree angled double nozzles for hazardous environments where there is a risk of small spillages of chemicals or dangerous substances. Meets ANSI and EN 15154 water flow standards for an eye/face wash. Includes an inspection record tag for recording test and service history.SPECIFICATIONSActivation: Squeeze grip operated with lock-on actuating buttonMaterial Specifications: Body: Polyarylamide (reinforced with glass fibers), Nozzles: Powder coated brass, Eye Cups: EPDM

Manufacturer: Hughes, Manufacturer Part Number: L18GS34GPowder coated stainless steel pipework, bowl, and rose ensures resistance to corrosive and flammable materials while also being easy to clean High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 16 x 12-in (407 x 305-mm) universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording test and service history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Ideal for laboratories, schools and general light duty indoor use, this floor mounted emergency combination shower is suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features specially designed valves with low operating torque offering reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching from the shower rose that is designed for high flow rates. Open bowl eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Features twin spray nozzles with dust covers that pop-off when eye wash is activated via the push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Highly visible red push plate with universal hand and eye wash sign for simple activation. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Powder-Coated Stainless SteelActivation: Shower: Pull Handle, Eye/Face wash: Push PlateMaterial Specifications: Rose: Powder coated stainless steel, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.

Manufacturer: Hughes, Manufacturer Part Number: L33GS34GPowder coated stainless steel pipework, bowl, and rose ensures resistance to corrosive and flammable materials while also being easy to clean High-performance quarter-turn ball valves made of 316L stainless steel endure the harshest environments and site conditions— low operating torque offers reliable, easy on/off operation Includes a separate 16 x 12-in (407 x 305-mm) universal eye wash and safety shower sign for enhanced visibility, as well as an inspection record tag for recording test and service history Meets ANSI Z358.1 2014 and EN 15154 standards, supports OSHA requirements Ideal for laboratories, schools and general light duty indoor use, this wall mounted emergency combination shower is suitable for use in applications that are not subject to the possibility of freezing or overheating. The system features specially designed valves with low operating torque offering reliable, easy on/off operation when emergencies occur. Valve includes an integral, heavy-duty stainless steel stop-plate to handle rough operation without failure. Durable, coated stainless steel shower pull handle with nylon valve connection is easy to grip and activate for immediate water drenching from the shower rose that is designed for high flow rates. Open bowl eye/face wash with high, ANSI-compliant flow rate includes aerated diffusers with fine mesh strainers and an individual flow controller which provide a soft, scrubbing action to the eyes and face. Features twin spray nozzles with dust covers that pop-off when eye wash is activated via the push plate. Easy-to-reach flow regulator valve adjusts to suit the severity of the accident. Highly visible red push plate with universal hand and eye wash sign for simple activation. Add optional foot treadle for a secondary means of eyewash activation. Some assembly may be required.SPECIFICATIONSEye/Face Wash Bowl Material: Powder-Coated Stainless SteelActivation: Shower: Pull Handle, Eye/Face wash: Push PlateMaterial Specifications: Rose: Powder coated stainless steel, Eye/facewash diffusers: Chrome plated brass with stainless steel mesh.