All

Manufacturer: Bradley, Manufacturer Part Number: 125-008Replacement Support Tube Gasket For Washfountain Units With Metal Bowl

Manufacturer: Bradley, Manufacturer Part Number: 125-011Replacement Support Tube Gasket For Washfountain Units With Non–Metal Bowls

Manufacturer: Justrite, Manufacturer Part Number: 8183GASKET – TIPOVER KIT for Safety Drum Funnels.

Manufacturer: Justrite, Manufacturer Part Number: 11025 Drum Covers provide an inexpensive way to convert open–top 30– and 55–gallon steel drums into fire–safe receptacles for combustible trash. Only a screwdriver and wrench are needed to attach the cover to a drum, and it can easily be removed when the drum must be emptied. Covers are steel, with a highly chemical–resistant powder coat paint finish. 30–gallon cover will fit drums nominally 18.375" diameter. 55–gallon size will fit drums from 22.5" to 22.75" diameter. On models 26730 and 26750, a replaceable fusible–link assembly inside the cover melts at 165°F to automatically slam the cover shut if there is a fire in the drum to extinguish the flame. To control vapors when disposing of solvent soaked rags and wipes, model 26752 offers a gasketed, latched lid to seal the drum preventing vapor release. A vent is provided to relieve pressure build–up under elevated temperatures, between 3 and 5 psig.

Manufacturer: Justrite, Manufacturer Part Number: 11407This is a GASKET VOLARA for NON–METAL DISP CANS.

Manufacturer: Justrite, Manufacturer Part Number: 8292This is a GATE BLADE #3114.

Manufacturer: Zing, Manufacturer Part Number: 7807 Gate Valve Lockout fits handle sizes from 1" to 2.5". The device is made from steel and accommodates up to 2 padlocks.

Manufacturer: Zing, Manufacturer Part Number: 7811 Gate Valve Lockout fits handle sizes from 10" to 13". Unique all steel construction adds security to valve lockout applications which can be useful in public facing lockout situations. Steel construction also adds higher temperature resistance for more extreme lockout applications. Accommodates up to 4 padlocks. Includes a perfed knockout to accomodate rising stems.

Manufacturer: Zing, Manufacturer Part Number: 7808 Gate Valve Lockout fits handle sizes from 2.5" to 5". The device is made from steel and accommodates up to 3 padlocks.

Manufacturer: Zing, Manufacturer Part Number: 7809 Gate Valve Lockout fits handle sizes from 1" to 2.5". The device is made from steel and accommodates up to 4 padlocks.

Manufacturer: Zing, Manufacturer Part Number: 7810 Gate Valve Lockout fits handle sizes from 6.5" to 10". Unique all steel construction adds security to valve lockout applications which can be useful in public facing lockout situations. Steel construction also adds higher temperature resistance for more extreme lockout applications. Accommodates up to 4 padlocks. Includes a perfed knockout to accomodate rising stems.

Manufacturer: First Aid Only, Manufacturer Part Number: AN206ACGauze Pads, 3" x 3", 8/Box - Model Number: AN206|UOM: BX/CS - First Aid and Emergency Products - Wound Care - Bandages, Pads, and Dressings

Manufacturer: First Aid Only, Manufacturer Part Number: B207ACGauze Pads, 4" x 4", 4/Box - Model Number: B207|UOM: BX - First Aid and Emergency Products - Wound Care - Bandages, Pads, and Dressings

Manufacturer: First Aid Only, Manufacturer Part Number: FAE5002ACFor Smart Compliance cabinets with the SmartTab EzRefill™ system. - Model Number: FAE5002|UOM: EA - First Aid and Emergency Products - First Aid Kits - SmartCompliance - SmartCompliance Refills

Manufacturer: First Aid Only, Manufacturer Part Number: FAE5006ACGauze Roll Bandage, 3", 1/Each - Model Number: FAE5006|UOM: EA - First Aid and Emergency Products - First Aid Kits - SmartCompliance - SmartCompliance Refills

Manufacturer: Bradley, Manufacturer Part Number: LK241872GHM-200Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK241872GHM-202Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK241872GHM-203Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 18in. deep. The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK242172GHM-200Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 21in. deep The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK242172GHM-202Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 21in. deep The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK242172GHM-203Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 21in. deep The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK242472GHM-200Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Gray High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 24in. deep The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK242472GHM-202Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Beige High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 24in. deep The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.

Manufacturer: Bradley, Manufacturer Part Number: LK242472GHM-203Lenox Gear Locker is constructed of 1/2in. HDPE material. Lenox Gear Lockers are designed to resist moisture, rust, and delamination. The durable and vandal resistant construction is fully welded. Constructed of Deep Blue High Density Polyethelene plastic. The Gear Locker configuration is 24in. wide. The Gear Locker configuration is 24in. deep The height of the Locker is 72in. Mills Company warranty of 20 years on plastic components against rust, delamination, and breakage under normal use.