All

Manufacturer: Vestil, Manufacturer Part Number: FM-T-DUMPCapacity: 1,000 lbs., Overall Size: 40"W x 52"L x 41"H – Fork Truck Mounted Trash Can Dumper – Saves time and reduces work–related injuries caused by lifting and dumping heavy waste containers. This innovative product will allow a fork truck driver to lift and dump refuse containers weighing up to 1,000 lbs. without ever leaving the seat of the fork truck. Secure dumper to fork truck with safety chain and run cable to drivers seat. Align trash can with dumper and lock into place. Once locked in place, transport trash can to refuse container, align and pull chain to dump refuse container contents. Fork pockets are 2.25: high by 7.25" wide usable. Steel construction for years of dependable use.

Manufacturer: Vestil, Manufacturer Part Number: TCD-FM-ELift, carry, and dump trash cans without leaving the seat of your fork truck with this Trash Can Dumper. Simple design does not have any moving parts. Includes sloped guides to center container as it rotates and adjustable pick-up hooks. Safety restraint included for securing unit to fork truck.

Manufacturer: Wesco, Manufacturer Part Number: 261028Model #: PESFL–56–25. Forks are 25 inches long and 3 inches wide. Leg ID/OD 15"/21". Load Center 15". Meets ASME B56.10 specifications. Remote control, floor lock, and safety screen are standard on all models. With a minimally charged battery, unit can be used while recharging. Easy to read illuminated battery status voltmeter at no extra cost! 12V DC battery or 110V AC units available. To order add AC to the end of the battery powered stacker part #. PESFL–56–25 FRAME: 052639. Steel Construction. Weight Capacity: 1000 lbs. 5" Phenolic Wheels. 4" Phenolic Casters. Raised Height: 56", Lowered Height: 0". Handle Bars. Floor Lock: Yes. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 261029Model #: PESFL–64–25. Forks are 25 inches long and 3 inches wide. Leg ID/OD 15"/21". Load Center 15". Meets ASME B56.10 specifications. Remote control, floor lock, and safety screen are standard on all models. With a minimally charged battery, unit can be used while recharging. Easy to read illuminated battery status voltmeter at no extra cost! 12V DC battery or 110V AC units available. To order add AC to the end of the battery powered stacker part #. PESFL–64–25 FRAME: 052640. Steel Construction. Weight Capacity: 1000 lbs. 5" Phenolic Wheels. 4" Phenolic Casters. Raised Height: 64", Lowered Height: 0". Handle Bars. Floor Lock: Yes. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 261030Model #: PESFL–76–25. Forks are 25 inches long and 3 inches wide. Leg ID/OD 15"/21". Load Center 15". Meets ASME B56.10 specifications. Remote control, floor lock, and safety screen are standard on all models. With a minimally charged battery, unit can be used while recharging. Easy to read illuminated battery status voltmeter at no extra cost! 12V DC battery or 110V AC units available. To order add AC to the end of the battery powered stacker part #. PESFL–76–25 FRAME: 052641. Steel Construction. Weight Capacity: 1000 lbs. 5" Phenolic Wheels. 4" Phenolic Casters. Raised Height: 76", Lowered Height: 0". Handle Bars. Floor Lock: Yes. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 261028-PDModel #: PESFL–56–25–PD. Power Drive System. Variable speed, steerable power drive system allows a single user to easily control forward and reverse movement of stacker. Simple to use finger–tip controls are built into steering handle. 180 degree hinged design allows precision steering in confined spaces. Red emergency stop button. Spring–loaded mechanism automatically compensates for uneven floors ensuring drive wheels maintain constant contact with floor. Two maintenance–free sealed batteries provide plenty of power for propulsion and lift. 1,000 – 2,000 lb. capacities. Automatic emergency safety switch instantly reverses direction if control post comes in contact with obstacle. PESFL–56–25–PD FRAME: 055620 (PD). Steel Construction. Weight Capacity: 1000 lbs. 5" Phenolic Wheels. 4" Phenolic Casters. Raised Height: 56", Lowered Height: 0". Handle Bars. Floor Lock: Yes. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 261029-PDModel #: PESFL–64–25–PD. Power Drive System. Variable speed, steerable power drive system allows a single user to easily control forward and reverse movement of stacker. Simple to use finger–tip controls are built into steering handle. 180 degree hinged design allows precision steering in confined spaces. Red emergency stop button. Spring–loaded mechanism automatically compensates for uneven floors ensuring drive wheels maintain constant contact with floor. Two maintenance–free sealed batteries provide plenty of power for propulsion and lift. 1,000 – 2,000 lb. capacities. Automatic emergency safety switch instantly reverses direction if control post comes in contact with obstacle. PESFL–64–25–PD FRAME: 052669 (PD). Steel Construction. Weight Capacity: 1000 lbs. 5" Phenolic Wheels. 4" Phenolic Casters. Raised Height: 64", Lowered Height: 0". Handle Bars. Floor Lock: Yes. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Wesco, Manufacturer Part Number: 261030-PDModel #: PESFL–76–25–PD. Power Drive System. Variable speed, steerable power drive system allows a single user to easily control forward and reverse movement of stacker. Simple to use finger–tip controls are built into steering handle. 180 degree hinged design allows precision steering in confined spaces. Red emergency stop button. Spring–loaded mechanism automatically compensates for uneven floors ensuring drive wheels maintain constant contact with floor. Two maintenance–free sealed batteries provide plenty of power for propulsion and lift. 1,000 – 2,000 lb. capacities. Automatic emergency safety switch instantly reverses direction if control post comes in contact with obstacle. PESFL–76–25–PD FRAME: 052654. Steel Construction. Weight Capacity: 1000 lbs. 5" Phenolic Wheels. 4" Phenolic Casters. Raised Height: 76", Lowered Height: 0". Handle Bars. Floor Lock: Yes. A discount is available for purchases of 10 or more items. Call contractor at 317–867–2911 for details.

Manufacturer: Vestil, Manufacturer Part Number: FRS-4-12Insert the loop at the tip of the fork and slide it up at a 45 ° angle. Then, lay it down over the existing forks. Load pallets into the rear of trailer conveniently and easily. Practical for pushing pallets two or three deep into a trailer.

Manufacturer: Vestil, Manufacturer Part Number: FRS-5-12Insert the loop at the tip of the fork and slide it up at a 45 ° angle. Then, lay it down over the existing forks. Load pallets into the rear of trailer conveniently and easily. Practical for pushing pallets two or three deep into a trailer.

Manufacturer: Vestil, Manufacturer Part Number: FRS-6-12Insert the loop at the tip of the fork and slide it up at a 45 ° angle. Then, lay it down over the existing forks. Load pallets into the rear of trailer conveniently and easily. Practical for pushing pallets two or three deep into a trailer.

Manufacturer: Vestil, Manufacturer Part Number: FTA-P-SWCIn warehouses stretch wrap is seemingly always required. But, rolls of wrap can often be elusive; gone the second you need it. That's where the stretch wrap caddy comes in! The stretch wrap caddy is built to hold rolls of wrap when your hands are otherwise in use, like driving a fork truck. The caddy can be attached to the exterior of the fork truck in any position that fits the users' preference and ready for use in a matter of minutes. So stop wasting precious time looking for the roll of stretch wrap and just remember it's in the last place you left it; in the stretch wrap caddy! -Built of durable plastic -Pre-drilled mounting holes -Mounting screws included -High tack adhesive included

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-12-DCUniform Capacity (pounds): 1,200, Accepts: 55–gallon steel drum, Chain (feet): 15 , Drum Rotation (degrees): 360, Fork Pocket Height (in.): 2–1/2, Fork Pocket Width (in.): 7–1/2, DC Voltage: 24 – This Fork Truck Drum Carrier/Rotator allows you to easily transport and rotate steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Carrier/Rotator is provided with a chain to allow the drum to be rotated from the fork truck operator's seat. This DC powered unit includes battery, on–board charger, and hand held control on a long coil cord. Drum must be full to rotate at rated capacity.

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-20Capacity: 2,000 lbs., 10 crank turns per 90° rotation, 15' Chain – Fork Truck Drum Carrier / Rotator – This product allows you to easily transport and rotate 55 gallons steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Each unit is provided with a 15 foot long chain to allow the drum to be rotated up to 360° from the fork truck operator's seat. Fork pockets measure 7" wide by 2" high usable. Safety chain is used to secure unit to fork truck. Bung Nut Wrench included for opening and closing drums.

Manufacturer: Vestil, Manufacturer Part Number: DCR-205-8-DCCapacity: 800 lbs. – Fork Truck Drum Carrier / Rotator – This product allows you to easily transport and rotate 55–gallon steel drums using a fork truck. Drums are held securely in place by a durable chain locking system. Fork pockets measure 7" wide by 2" high usable. Safety chain is used to secure unit to fork truck. A bung nut wrench is also included for opening and closing drums. 12V DC Powered Operation. Drum must be full to rotate at rated capacity.

Manufacturer: Vestil, Manufacturer Part Number: SCRAPE-1Blade Width: 12", Overall Size (W x L x H): 13" x 36" x 8", Usable Fork Opening (W x H): 9–1/4" x 3–1/4" – Fork Truck Floor Scraper – Great new product designed to turn your fork truck into a floor scraper. Works well in paint and finish rooms for removing over sprayed paint from floors. Simply slide fork into opening and attach safety restraint to carriage for safety. Features hardened scraping blade for long life and durability. Blade is mounted in pivot assembly to allow it to raise up with contact against a crack or rise in the floor. Heavy–duty welded steel construction. Painted finish.

Manufacturer: Vestil, Manufacturer Part Number: FC-29Usable Size (W x H): 7–1/2" x 2–1/2", Casters: 3" to 1" Swivel, Capacity: 2000 lbs. – Fork Truck Fork Caddy – Transport fork truck forks easily and safely. This caddy allows the user to easily remove and install forks onto a fork truck. This is usually a dangerous and time consuming process, but our fork caddy makes this a breeze. After transporting the fork to the fork truck, rotate the handle 90°. Slide the fork onto the mast. The Fork Caddy has easy–grip handles and rolls smoothly on two swivel casters. A locking screw secures the fork into the caddy to keep it in place while transporting. The comfort–grip handle pivots up to 180° to allow for easier mobility. The Fork Caddy is lightweight and small enough for easy storage as well.

Manufacturer: Vestil, Manufacturer Part Number: FRK-LVLDesigned to aid the fork lift driver in determining when the forks are level. Unit reduces the risk of damaging or piercing product when removing it from pallet racking. Fasten the steel leveler to the mast of the fork lift. While tilting the forks to the desired angle, the fork leveler will tilt as well, showing that the forks are not currently in a horizontal position. When forks are moved back into a safe level angle, the leveler will be perfectly horizontally.

Manufacturer: Vestil, Manufacturer Part Number: SPB-P-72Unique design attaches to fork truck forks. Pass through fork tubes keep weight back towards fork truck mast. Locking pins secure snow plow to forks for safety. The steel construction has a brightly colored baked-in powder-coated finish for added toughness and clear visibility. The attached sides contain the snow in a direct manner for time and safety efficiency. MFG Part# SPB-P-72

Manufacturer: Zing, Manufacturer Part Number: 7675 Forklift lockout kits provide a comprehensive lockout solution for forklift and other electric or propane-powered vehicle lockout. The kit includes devices, locks, tags, and warning stickers in a durable, portable fabric pouch. Kit contents include: Multi-functional Forklift/Plug/Valve Lockout Device (part #7294) 1 Lockout Padlock (part # 7030) 1 Lockout Hasp (part # 7620) Safety Tags, "Danger Do Not Use," 10/pk (part # 7500) Safety Tags, Forklift Inspection, 10/pk (part # 7501) Forklift Warning Labels, 3 Points Contact, 10/pk (part # 7506) Cable Ties (part # 7130) Medium Fabric Bag (part # 7309)

Manufacturer: Vestil, Manufacturer Part Number : VPS-60A forklift broom is a perfect fit to the maintenance and construction facilities. The polypropylene construction provides a strong and durable unit throughout both indoor and outdoor use. Rows of brush sections can be taken out for a more preferred setup. The long length provides a time saving, efficient unit that will cover an abundance of surface area with less travel time. The simple forklift attachment allows the unit to be used with very short setup time. For best use, utilize the attached fork pockets and connect the safety chains. Once in place, the unit can be maneuvered to gather debris that has been left throughout the workplace. -Steel frame construction with built in fork pockets for maneuverability -Polypropylene brushes for strength and sustainability -Durable for indoor or outdoor use -Long broom length for time efficiency

Manufacturer: Vestil, Manufacturer Part Number : VPS-72A forklift broom is a perfect fit to the maintenance and construction facilities. The polypropylene construction provides a strong and durable unit throughout both indoor and outdoor use. Rows of brush sections can be taken out for a more preferred setup. The long length provides a time saving, efficient unit that will cover an abundance of surface area with less travel time. The simple forklift attachment allows the unit to be used with very short setup time. For best use, utilize the attached fork pockets and connect the safety chains. Once in place, the unit can be maneuvered to gather debris that has been left throughout the workplace. -Steel frame construction with built in fork pockets for maneuverability -Polypropylene brushes for strength and sustainability -Durable for indoor or outdoor use -Long broom length for time efficiency

Manufacturer: Vestil, Manufacturer Part Number: FCB-818Overall Size: 8"W x 18"H – Forklift Carriage Bumper – Protect loads from potential damage with our Fork Truck Carriage Bumper. Simply bolt to forklift carriage with included hardware.

Manufacturer: Morse, Manufacturer Part Number: 285AUse Morse model 285A Forklift–Karrier to lift, transport, rotate and pour a heavy drum. You control the drum tilting right from the driver's seat of your fork truck with the 20' chain loop. Turn your drum 360 degrees in either direction. It is simple to mount on the forks without using any tools. No power connections or truck modifications are required. Fork pocket openings are 24.5" apart, and 2.5" high by 6.5" wide. Handles a 55–gallon steel drum. Capacity: 800 Lb. full drum, 500 Lb. half full drum. Accepts Diameter Adaptors (sold separately) to handle a smaller drum. CAPACITY: 800 Lb.