All

Manufacturer: Accuform, Manufacturer Part Number: KDD486Gas Cylinder Lockout Cap. Designed to fit most North American high and low pressure gas cylinders. The Snap Cap" Lockout completely covers the main cylinder control and regulator attachment – rendering the cylinder, its contents, and regulator useless. Snap down the side arm and secure the device with a padlock (included). Access is only available by release of the padlock. Snap Cap" Lockout meets DOT standards as a safety device. Made of welded–steel construction and powder coated to withstand the tough and abusive handling conditions that can be subjected to cylinders.SPECIFICATIONSOPTION: Coarse Thread

Manufacturer: Accuform, Manufacturer Part Number: KDD482Gas Cylinder Lockout Cap. Designed to fit most North American high and low pressure gas cylinders. The Snap Cap" Lockout completely covers the main cylinder control and regulator attachment – rendering the cylinder, its contents, and regulator useless. Snap down the side arm and secure the device with a padlock (included). Access is only available by release of the padlock. Snap Cap" Lockout meets DOT standards as a safety device. Made of welded–steel construction and powder coated to withstand the tough and abusive handling conditions that can be subjected to cylinders.SPECIFICATIONSOPTION: Fine Thread

Manufacturer: Accuform, Manufacturer Part Number: KDD488Gas Cylinder Lockout Cap. Designed to fit most North American high and low pressure gas cylinders. The Snap Cap" Lockout completely covers the main cylinder control and regulator attachment – rendering the cylinder, its contents, and regulator useless. Snap down the side arm and secure the device with a padlock (included). Access is only available by release of the padlock. Snap Cap" Lockout meets DOT standards as a safety device. Made of welded–steel construction and powder coated to withstand the tough and abusive handling conditions that can be subjected to cylinders.SPECIFICATIONSOPTION: Coarse Thread

Manufacturer: Accuform, Manufacturer Part Number: KDD484Gas Cylinder Lockout Cap. Designed to fit most North American high and low pressure gas cylinders. The Snap Cap" Lockout completely covers the main cylinder control and regulator attachment – rendering the cylinder, its contents, and regulator useless. Snap down the side arm and secure the device with a padlock (included). Access is only available by release of the padlock. Snap Cap" Lockout meets DOT standards as a safety device. Made of welded–steel construction and powder coated to withstand the tough and abusive handling conditions that can be subjected to cylinders.SPECIFICATIONSOPTION: Fine Thread

Manufacturer: Denios, Manufacturer Part Number : L65-0400 -Regulations and Compliance: OSHA|NFPA -Fire Rating [hr): 2 -Storage Capacity: 12 -Max Cylinder Diameter [in]: 9 -Color: Blue -Door Type Hinged -Material: Steel

Enhance your operational efficiency with this robust gas cylinder storage unit engineered by Little Giant. Designed to create a clear separation between full and empty cylinders, it optimizes workflow while reducing downtime and safety hazards in busy industrial settings. The unit’s durable, all-welded construction ensures long-lasting reliability, and its corrosion-resistant, powder-coated finish is built to withstand harsh environments.Key Features Two distinct compartments for clear separation of “Full” and “Empty” cylinders Each compartment holds 5–15 upright cylinders, ensuring organized storage Expertly constructed with all-welded joints for enhanced durability Precise dimensions: 72″ W x 38″ D x 70″ H that fit seamlessly into your workspace Manufacturer Part Number: GSU272W70H This gas cylinder storage unit is an ideal investment for industries in need of efficient gas storage solutions. Whether you're looking to buy gas cylinder storage or purchase a gas cylinder storage unit, its design streamlines operations while promoting safety and compliance to meet today’s industrial demands.Explore our Little Giant collection or browse our specialized Cylinder Storage solutions for more innovative products designed to keep your workplace running smoothly.

This Vestil PTM-GPT gas-powered trailer mover is engineered for efficient and safe trailer handling. Ideal for industrial and commercial use, this gasoline trailer dolly offers robust performance and reliable maneuverability in tight spaces. Designed to optimize your workflow, it is a dependable solution for moving heavy trailers on various surfaces.Key Features Enhanced traction with a uniform pull capacity of 12,000 lbs for moving large trailers. A reliable tongue lift capacity of 1,000 lbs ensuring secure handling. A powerful 6-horsepower gasoline engine providing consistent performance. Adjustable ball service (17 to 27 inches) to accommodate a variety of trailer setups. Engineered for ease-of-use with a focus on safe, precise movements. Detailed Specifications Uniform Pull Capacity: 12,000 lbsBenefit: Easily handles heavy loads for efficient movement. Tongue Lift Capacity: 1,000 lbsBenefit: Provides the necessary force to lift trailer tongues securely. Gasoline Engine: 6 HPBenefit: Offers robust power to navigate challenging environments. Ball Service: 17 to 27 inchesBenefit: Ensures versatility in trailer hitching. Ball Sizes: 1–7/8 in, 2 in, and 2–5/16 inBenefit: Compatible with a range of trailer ball specifications. Front Wheel Diameter/Width: 18 in / 8-1/2 inBenefit: Promotes stable and controlled maneuverability. Rear Swivel Caster: Pneumatic, 12 in diameterBenefit: Provides smooth, precise turns and enhanced mobility. This gas-powered trailer mover combines reliability and performance for effective trailer management. Discover more about high-quality products in our Vestil and Movers collections.

Manufacturer: Vestil, Manufacturer Part Number: ALL-T-4-GPT An all-terrain pallet truck with a gas powered drive system is the perfect solution when moving items over uneven surfaces. This pallet truck is great for use at construction sites and landscaping areas. With the use of a tilting fork feature, the products can be positioned to better fit the users' needs. The robust steel construction and wide set outriggers enable the transference of items, both large and small. Steering handle includes multiple controls for user safety. PT units have Powered Tilt. Electric start Adjustable fork width Gas powered for consistent daily use Foam filled tires for added support Liquid painted finish Complies with ASME B56.1-2004 Capacity: 4,000 lbs. (Capacity at an 18" Load Center), Adjustable Fork Width: 8" to 36", Fork: 4"W x 36"L, Service Range: 2–5/8" to 12", Overall Size: 79"W x 68"L – Gas–Powered All–Terrain Pallet Truck – All terrain pallet truck with gas–powered traction drive system. Great for moving heavy loads over rough terrain. Powered by a Briggs & Stratton 6HP gas–powered engine for both the power traction drive and fork lift/lower. Handle with forward reverse speed control and dead man safety switch. Hydrostatic transmission with hand–operated forward and reverse selection. Powered fork raise and lower controlled with independent levers. Usable width between outriggers is 50". Pneumatic steer wheels are 13" diameter x 4" wide each. The drive wheels are 18" diameter x 8" wide each. Wheels include sealed bearings for outdoor use. Steering arc is 150°.    

The Gas-Powered Hydraulic Drum Crusher is engineered for efficiency and safety in demanding industrial environments. This mobile drum crusher, powered by a robust Briggs & Stratton gasoline engine, features a fully automatic crushing cycle that reduces trips and speeds up material handling. Perfect for operations looking for a dependable drum crusher machine or oil drum crusher, it blends high performance with crucial safety features.Key Features• Powerful Briggs & Stratton gasoline engine with a reliable emergency stop button (mushroom-head design) for rapid shutdown.• Efficient hydraulic system that includes a built-in reservoir and an air/oil cooler to prevent overheating during continuous operation.• User-friendly controls featuring a foot pedal for precise crushing and an integrated door interlock system to ensure proper cycle initiation.• Built-in mobility with power tilt, an integral trailer equipped with stabilizing outriggers, nose jack, and tail/brake lights.• A built-in drum head piercing spike helps release internal pressure in sealed drums, ensuring a complete, automatic crushing operation.Usage RecommendationsFor best results, operate this drum crusher in a well-ventilated outdoor area. It is not designed for crushing smooth-walled drums. The fully automatic cycle resets immediately after crushing, streamlining workflow and enhancing overall safety.Manufacturer: Vestil | Model: HDC-900-GPTDiscover more in our Drum Crusher and Compactor collection and explore additional Material Handling solutions for all your industrial needs.

Manufacturer: Justrite, Manufacturer Part Number: 11408This is a GASKET–COVER.

Manufacturer: Justrite, Manufacturer Part Number: 11073This is a GASKET – HOSE.

Manufacturer: Justrite, Manufacturer Part Number: 28216Aerosolv is the safe and economical way to dispose of aerosol cans. Safe, convenient and compliant, Aerosolv provides an easy–to–use, effective method of relieving pressure in spent aerosol cans. It changes them from solid hazardous waste to a non–hazardous, fully–recyclable state. This eliminates the expense of solid waste disposal of aerosol cans. Every 100 cans punctured and emptied by Aerosolv increases recyclable scrap metal by 25 lb. and reduces solid waste by 10 cubic feet, making Aerosolv extremely cost–effective. As an added benefit, residual liquids may be eligible for reclamation or recycling, resulting in "waste–minimization credits". The contents of over 4,000 spent aerosols may be collected in just one 55–gallon drum.

Manufacturer: Justrite, Manufacturer Part Number: 8357This is a GASKET O RING (VITON) 8300/06.

Manufacturer: Justrite, Manufacturer Part Number: 11023This is a GASKET–DRUM COVER.

Manufacturer: Justrite, Manufacturer Part Number: 11022This is a GASKET–PT & QT COVER ASSY.

Manufacturer: Bradley, Manufacturer Part Number: 125-008Replacement Support Tube Gasket For Washfountain Units With Metal Bowl

Manufacturer: Bradley, Manufacturer Part Number: 125-011Replacement Support Tube Gasket For Washfountain Units With Non–Metal Bowls

Manufacturer: Justrite, Manufacturer Part Number: 8183GASKET – TIPOVER KIT for Safety Drum Funnels.

Manufacturer: Justrite, Manufacturer Part Number: 11025 Drum Covers provide an inexpensive way to convert open–top 30– and 55–gallon steel drums into fire–safe receptacles for combustible trash. Only a screwdriver and wrench are needed to attach the cover to a drum, and it can easily be removed when the drum must be emptied. Covers are steel, with a highly chemical–resistant powder coat paint finish. 30–gallon cover will fit drums nominally 18.375" diameter. 55–gallon size will fit drums from 22.5" to 22.75" diameter. On models 26730 and 26750, a replaceable fusible–link assembly inside the cover melts at 165°F to automatically slam the cover shut if there is a fire in the drum to extinguish the flame. To control vapors when disposing of solvent soaked rags and wipes, model 26752 offers a gasketed, latched lid to seal the drum preventing vapor release. A vent is provided to relieve pressure build–up under elevated temperatures, between 3 and 5 psig.

Manufacturer: Justrite, Manufacturer Part Number: 11407This is a GASKET VOLARA for NON–METAL DISP CANS.

Manufacturer: Justrite, Manufacturer Part Number: 8292This is a GATE BLADE #3114.

Manufacturer: Zing, Manufacturer Part Number: 7807 Gate Valve Lockout fits handle sizes from 1" to 2.5". The device is made from steel and accommodates up to 2 padlocks.

Manufacturer: Zing, Manufacturer Part Number: 7811 Gate Valve Lockout fits handle sizes from 10" to 13". Unique all steel construction adds security to valve lockout applications which can be useful in public facing lockout situations. Steel construction also adds higher temperature resistance for more extreme lockout applications. Accommodates up to 4 padlocks. Includes a perfed knockout to accomodate rising stems.

Manufacturer: Zing, Manufacturer Part Number: 7808 Gate Valve Lockout fits handle sizes from 2.5" to 5". The device is made from steel and accommodates up to 3 padlocks.