All

Manufacturer: Vestil, Manufacturer Part Number: FE-4-42Provide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork. MFG Part# FE-4-42

Manufacturer: Vestil, Manufacturer Part Number: FE-4-66Provide the extra support needed to lift long or large objects with a fork truck using a Fork Extension. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-66Provide the extra support needed to lift long or large objects with a fork truck using a Fork Extension. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FE-6-66Provide the extra support needed to lift long or large objects with a fork truck using a Fork Extension. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FORK-R-54Overall Size: 40"W x 46"D x 54"H, Minimum Fork Length: 60" – Fork Extension Storage Rack – Install or remove fork extensions without lifting, pushing or getting off the fork truck. Easy to use: A) Drive in so tips of forks are over elevated bar. B) Lower forks until fork nests in channel in base of rack. C) Back fork truck out of fork retraining straps. Forks not included.

Manufacturer: Vestil, Manufacturer Part Number: FE-4-72Provide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Steel retaining strap prevents fork extensions from sliding off forks during use. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork.

FORK EXTENSIONS - PIN STYLE from Vestil (MFG Part# FE-5-90-P) are engineered to deliver the additional support required when handling longer or larger loads with a forklift. Designed for temporary use, these high-quality extensions enhance load stability and safety while meeting OSHA regulations. Built for reliability and durability, they offer an ideal solution for industrial and commercial applications where efficient load handling is essential.Key Features• Welded steel construction with durable, cast steel tips• Integrated retaining strap that prevents the extensions from slipping off during use• Powder coat yellow finish for improved durability and visibility• Compliance with OSHA regulations (extensions must not exceed 150% of the original fork length)• Simple, secure installation method ensuring a tight fit every timeInstallation Steps Remove the pin from the forklift. Carefully slide the extension over the existing fork. Reinsert the pin behind the fork heel to secure the extension. Why Choose Vestil Fork Extensions?• Improves load stability during over-length lifting operations• Constructed from premium materials for long-term durability in demanding industrial settings• Easy, quick installation that minimizes downtime and boosts operational efficiencyThese Vestil fork extensions are carefully designed for safe and compliant material handling. Explore more durable forklift solutions in our Vestil collection or check out our Forklift Accessories for a full range of supporting products.

Introducing the Vestil FE-P Fork Extensions (Pin Style), a dependable solution designed to boost your forklift’s lifting capacity for longer or larger objects. Constructed with strong welded steel and durable cast steel tips, these extensions deliver the additional support required in demanding industrial settings. They help maintain balance, ensure proper load distribution, and adhere to OSHA regulations stating that extensions may not exceed 150% of the existing fork length. This well-considered design makes them an excellent addition to any material handling operation.Key Features Durable Build: Welded steel body combined with cast steel tips for reliable, long-term performance. Safety First: Includes a steel retaining strap to prevent slippage during operation. OSHA Compliant: Conforms to the requirement of not exceeding 150% of the original fork length. Vibrant Finish: Powder-coated in yellow for improved visibility and corrosion resistance. Manufacturer Details: Produced by Vestil; Manufacturer Part Number: FE-4-90-P. Installation & Usage Remove the existing pin from your forklift. Carefully align and position the extension over the fork. Drive the forklift into the extension and reinsert the pin behind the fork heel to secure it. These fork extensions enable safer lifting and enhance operational efficiency across various industrial applications. Upgrade your material handling system with this versatile accessory. For additional options in industrial fixtures, visit our Material Handling and Vestil collections.

Enhance your forklift’s performance with these heavy-duty forklift fork extensions designed to extend reach and improve stability when handling large or awkward loads. Built for durability and engineered to comply with safety standards, these extensions deliver outstanding performance for industrial material handling applications.Key Features• Welded steel construction with cast steel tips for exceptional durability• Powder-coated yellow finish enhances visibility and resists corrosion• Secure retaining strap and locking pin mechanism ensure dependable stability• OSHA-compliant design for safe and efficient load management• Ideal for temporary use during extended reach operationsTechnical Specifications• Manufacturer: Vestil• Manufacturer Part Number: FE-6-90-P• Engineered to not exceed 150% of the existing fork length for safe operationInstallation Instructions• Remove the existing pin from the forklift fork• Slide or drive the extension securely over the fork• Reinsert the pin behind the fork’s heel to lock the extension in placeAdhering to strict safety protocols and regulatory guidelines, these forklift fork extensions offer an efficient solution for industrial and commercial operations. Enjoy the reliability of a safety-compliant and engineered product—ensuring your material handling needs are met with ease and confidence. Discover more heavy-duty solutions in our Forklift Attachments collection.

A pair of high-quality 120 fork extensions offers improved lifting performance with enhanced durability and easy installation. Designed for heavy-duty industrial and commercial settings, these extensions give you the extra support needed to safely move long or oversized loads. Built to exact specifications, they provide reliable strength for a consistent, even lifting capacity across all your material handling needs. Check out our Material Handling collection and trusted Vestil products to complete your setup.Key Specifications• Uniform capacity: 4,000 lbs evenly distributed per pair• Fork extension inside height: 2 in.• Fork extension inside width: 4½ in.• Maximum fork length: 120 in.• Constructed with welded steel and cast steel tips• Finished with a durable powder coat yellow finish• Secure pin-style mounting with a built-in loop designInstallation & Safety• Insert the loop at the tip of the extension and slide it upward at a 45° angle before positioning it over the existing fork• Secure with the mounting pin to prevent any slippage during operation• Adhere to OSHA regulations: the extension length must not exceed 150% of the existing fork length• Ensure all warning and operating stickers remain visible to maintain a safe working environmentUsage & CompatibilityIdeal for class 2 and class 3 forklifts, these fork extensions perform exceptionally in situations that require additional stability and reach, such as moving long items or securely loading shipments into deep trailers. Enjoy peace of mind knowing that every installation is supported by Spill 911 Inc.'s nearly 30 years of expertise in industrial safety and spill response solutions.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-72Provide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (150) percent of the existing fork length. Insert loop at the tip of the fork and slide it up at a forty-five (45) degree angle. Then, lay it down over the existing fork.

Manufacturer: Vestil, Manufacturer Part Number: FE-7-48-PProvide the extra support needed to lift long or large objects with a fork truck. Welded steel construction with tapered steel tips. Steel retaining strap (loop style*) prevents fork extensions from sliding off forks during use. Baked-in powder coat finish for added toughness. OSHA regulations require that extensions are no more than 150% of the existing fork length. (e.g. 48in existing forks, the fork extension should not exceed 72in). Maximum uniform capacity is 4,000 pounds evenly distributed per pair. MFG Part# FE-7-48-P

Manufacturer: Vestil, Manufacturer Part Number: FE-4-66-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension.

Manufacturer: Vestil, Manufacturer Part Number: FE-5-66-PProvide the extra support needed to lift long or large objects with a fork truck using a pair of Fork Extensions. Welded steel construction with cast steel tips. Steel retaining strap prevents fork extensions from sliding off forks during use. Powder coat yellow finish. OSHA regulations require that extensions are no more than one-hundred and fifty (15) percent of the existing fork length. Remove pin and lay extension over fork or drive fork truck into the extension. Re-insert the pin behind the heel of the fork to secure extension.

Enhance your forklift’s lifting capacity with the FE-6-66-P Fork Extensions Pin Style 66L x 6W. Designed by Vestil and built with welded steel and durable cast steel tips, these forklift extensions offer exceptional reliability and safety when handling long or bulky items. The high-visibility powder-coated yellow finish not only protects the extension but also ensures your equipment stands out. Engineered to comply with OSHA regulations, these extensions must not exceed 150% of the original fork length for safe operation, and they are rated to support heavy loads of up to 4,000 lbs.Key Features Heavy-duty welded steel construction paired with cast steel tips Powder-coated yellow finish for enhanced visibility and protection Integrated steel retaining strap to prevent slippage during use Designed and manufactured by Vestil for dependable performance OSHA compliant, ensuring the extension does not exceed 150% of the fork length For additional information on high-quality products like these, visit our Vestil collection or check out our comprehensive Material Handling solutions.Installation Instructions Remove the securing pin from the current fork extension assembly. Carefully position the extension over the fork or back the fork truck into the extension. Reinsert the pin behind the fork’s heel to securely attach the extension. With these Fork Extensions, you can trust in a seamless integration with your forklift that not only improves load handling but also maintains the highest safety standards for industrial operations.

Manufacturer: Morse, Manufacturer Part Number: 285XBPFORKLIFT–KARRIER, 55–GALLON, 12V DC BATTERY POWER TILT, CAPACITY: 2500 Lb., REQUIRES 25" BETWEEN FORKS

Manufacturer: Morse, Manufacturer Part Number: 285G-HDFORKLIFT–KARRIER, 3–PIECE DRUM HOLDER, CAPACITY: 1500 Lb., REQUIRES 25" BETWEEN FORKS

Manufacturer: Morse, Manufacturer Part Number: 285GFORKLIFT–KARRIER, 3–PIECE DRUM HOLDER, 55–GALLON, CAPACITY: 800 Lb., REQUIRES 25" BETWEEN FORKS

Manufacturer: Morse, Manufacturer Part Number: 285XMGRFORKLIFT–KARRIER, 3–PIECE DRUM HOLDE R, SPARK RESISTANT PARTS, 2500 Lb. CAPACITY, REQUIRES 25" BETWEEN FORKS

Manufacturer: Morse, Manufacturer Part Number: 285AM-HDFORKLIFT–KARRIER, 55–GALLON, CAPACITY: 1500 Lb., SPARK RESISTANT PARTS, REQUIRES 25" BETWEEN FORKS

Manufacturer: Morse, Manufacturer Part Number: 285AMFORKLIFT–KARRIER, 55–GALLON, CAPACITY: 800 Lb., SPARK RESISTANT PARTS, REQUIRES 25" BETWEEN FORKS

Manufacturer: Vestil, Manufacturer Part Number: FTTM-2The Fork Lift Hitch is a superb addition to the manufacturing and maintenance facilities. A strong steel construction allows for long term use, even in the harshest of conditions. The hitch includes a yellow finish for clear visibility. For best use, slide the forklift forks into the unit and secure safety chain to forklift. Once in place, the unit is ready to be hitched to the desired equipment. MFG Part# FTTM-2

Manufacturer: Morse, Manufacturer Part Number: 284Morse model 284 Fork Mounted Hook slides right onto one fork of your forklift so you can use a Morse below hook drum lifter. Fork opening is 5.5" X 1–9/16". Capacity: 2,000 Lb. NOTE: Model 284 Fork Hook is NOT a drum lifter. It is a fork mounted hook from which to suspend a drum lifter or other device.SPECIFICATIONS17" x 9.5" x 9.5" - 11 lbs.

Manufacturer: Vestil, Manufacturer Part Number: FDG-30Acceptable Drum Sizes: 30–gallon, Usable Fork Opening: 5"W x 2"H – Fork Mounted Drum Gripper – Designed for use with fork trucks fitted with hydraulic lateral fork positioners only. Easily attaches to your forks for easy drum positioning. For use with 30–gallon steel drums. Usable fork openings are 6"W x 2"H. Secure to forks with friction–lock screw mechanism. Welded steel construction.