All

Manufacturer: Haws, Manufacturer Part Number: 1109.8BModel 1109.8B vandal-resistant ADA electric wall-mounted water cooler shall include an 18-gauge Type 304 Stainless Steel satin finish basin, 16 gauge galvanized steel in-wall mounting frame with welded-in heavy-duty 10 gauge mounting plate, vandal-resistant push-button operated stainless steel valve with front-accessible cartridge, in-line strainer and flow adjustment, 100% lead-free waterways, polished chrome-plated brass vandal-resistant bubbler head, polished chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plate, stainless steel satin finish back panel and louvered intrusion-proof grill, and 1-1/4" NPT concealed all cast-brass trap. The refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 L) of water at 50° F (10° C) cooled from 80° F (26.7° C) inlet water at 90° F (32.2° C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5. FOR INDOOR USE ONLY Product Includes: • 1109.8: Chilled Single Drinking Fountain • HCR8: Remote Chiller • MTGFR.SM: Mounting Frame

Manufacturer: Haws, Manufacturer Part Number: 1001BModel 1001B wall mounted barrier-free vandal-resistant drinking fountain shall include an 18 gauge Type 304 Stainless Steel satin finish basin with integral swirl design, 14 gauge Type 304 Stainless Steel wall bracket, 3/16″ (.47 cm) thick steel in-wall mounting plate, 100% lead-free waterways, vandal-resistant push-button operated stainless steel valve with front-accessible cartridge and flow adjustment, polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plate, and 1-1/4" (3.2 cm) O.D. waste pipe. (P-trap and stop require rear access) In extreme environments related to heat and cold, product(s) must be protected from damage/exposure due to these extreme conditions. Product Includes: • 1001: Fountain • 6700: In-Wall Mounting Plate

Manufacturer: Haws, Manufacturer Part Number: 1001MSBModel 1001MSB wall mounted barrier-free vandal-resistant drinking fountain shall include an 18 gauge Type 304 Stainless Steel satin finish basin with integral swirl design, 14 gauge Type 304 Stainless Steel wall bracket, 100% lead-free waterways, stainless steel satin finish back and access panel allowing for front access of P-trap and stop, in-wall mounting frame, vandal-resistant push-button operated stainless steel valve with front-accessible cartridge and flow adjustment, polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plate, and 1-1/4" O.D. (3.2 cm) waste pipe. In extreme environments related to heat and cold, product(s) must be protected from damage/exposure due to these extreme conditions. Product Includes: • 1001MS: Single Drinking Fountain • MTGFR.DF1: Mounting System

Manufacturer: Haws, Manufacturer Part Number: 1001PModel 1001P wall mounted vandal-resistant ADA drinking fountain and bottle filler shall include an 18 gauge Type 304 Stainless Steel satin finish basin with integral swirl design, 14 gauge Type 304 Stainless Steel wall bracket and bottle filler bracket, 3/16″ (.47 cm) thick steel mounting plates for fountain and bottle filler, 100% lead-free waterways, vandal-resistant push-button operated stainless steel valves with front-accessible cartridge and flow adjustment, polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow, 1 gpm (3.78 L) laminar flow bottle filler, chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plates, and 1-1/4" (3.2 cm) O.D. waste pipe. (P-trap and stop require rear access). In extreme environments related to heat and cold, product(s) must be protected from damage/exposure due to these extreme conditions. Product Includes: • 1001: Single Drinking Fountain • 1920: Bottle Filler • BP6: Back Panel • BP15: Back Panel • 6700 (X2): In-Wall Mounting Plates

Manufacturer: Morse, Manufacturer Part Number: 55/30-20.5ADAPTOR FOR 20"–20.5" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30-22ADAPTOR FOR 21.5"–22" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30-19GRADAPTOR FOR 18.5"–19" DIAMETER, FOR USE W/ 185G OR 285G SERIES, 185GR OR 285GR SERIES, 300 SERIES

Manufacturer: Morse, Manufacturer Part Number: AP405ADAPTOR TO HANDLE 55–GALLON PLASTIC DRUM WITH OMNI–LIFT DRUM RACKER

Manufacturer: Morse, Manufacturer Part Number: 55/30M-14.5ADAPTOR, SPARK RESISTANT, FOR 14"–14 .5" DIAMETER, INTEGRATED BRACKETS ADJUST FOR UP TO 38" TALL DRUM

Manufacturer: Morse, Manufacturer Part Number: 55/30M-16ADAPTOR, SPARK RESISTANT, FOR 15.5"– 16" DIAMETER, INTEGRATED BRACKETS ADJUST FOR UP TO 38" TALL DRUM

Manufacturer: Morse, Manufacturer Part Number: 55/30M-17.5ADAPTOR, SPARK RESISTANT, FOR 17"–17 .5" DIAMETER, INTEGRATED BRACKETS ADJUST FOR UP TO 38" TALL DRUM

Manufacturer: Morse, Manufacturer Part Number: 55/30M-19ADAPTOR, SPARK RESISTANT, FOR 18.5"– 19" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30M-20.5ADAPTOR, SPARK RESISTANT, FOR 20"– 20.5" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30M-22ADAPTOR, SPARK RESISTANT, FOR 21.5"– 22" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-14.5ADAPTOR, STAINLESS STEEL, FOR 14"– 14.5" DIAMETER, INTEGRATED BRACKETS ADJUST FOR UP TO 38" TALL DRUM

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-16ADAPTOR, STAINLESS STEEL, FOR 15.5"– 16" DIAMETER, INTEGRATED BRACKETS ADJUST FOR UP TO 38" TALL DRUM

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-17.5ADAPTOR, STAINLESS STEEL, FOR 17"– 17.5" DIAMETER, INTEGRATED BRACKETS ADJUST FOR UP TO 38" TALL DRUM

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-19ADAPTOR, STAINLESS STEEL, FOR 18.5"– 19" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-20.5ADAPTOR, STAINLESS STEEL, FOR 20"– 20.5" DIAMETER

Manufacturer: Morse, Manufacturer Part Number: 55/30SS-22ADAPTOR, STAINLESS STEEL, FOR 21.5"– 22" DIAMETER

Manufacturer: Vestil, Manufacturer Part Number: P-2436-2.625-AThe Add-A-Level raises workers to an optimum ergonomic height. Constructed from a heavy-density polyethylene resin which is one-hundred (1) percent recycled. The flow-through grid design permits liquids and small scrap to drain away. The Add-A-Level is also used as a storage platform to keep products off wet floors. Add-on units come standard with vertical connectors to allow units to be stacked and locked together. The poly-clip connector kit allows you to connect units side by side. There are many different configurations available.

Manufacturer: Vestil, Manufacturer Part Number: P-2448-2.625-AThe Add-A-Level raises workers to an optimum ergonomic height. Constructed from a heavy-density polyethylene resin which is one-hundred (1) percent recycled. The flow-through grid design permits liquids and small scrap to drain away. The Add-A-Level is also used as a storage platform to keep products off wet floors. Add-on units come standard with vertical connectors to allow units to be stacked and locked together. The poly-clip connector kit allows you to connect units side by side. There are many different configurations available.

Manufacturer: Vestil, Manufacturer Part Number: P-2496-2.625-AThe Add-A-Level raises workers to an optimum ergonomic height. Constructed from a heavy-density polyethylene resin which is one-hundred (1) percent recycled. The flow-through grid design permits liquids and small scrap to drain away. The Add-A-Level is also used as a storage platform to keep products off wet floors. Add-on units come standard with vertical connectors to allow units to be stacked and locked together. The poly-clip connector kit allows you to connect units side by side. There are many different configurations available.

Manufacturer: Vestil, Manufacturer Part Number: P-3696-2.625-AThe Add-A-Level raises workers to an optimum ergonomic height. Constructed from a heavy-density polyethylene resin which is one-hundred (1) percent recycled. The flow-through grid design permits liquids and small scrap to drain away. The Add-A-Level is also used as a storage platform to keep products off wet floors. Add-on units come standard with vertical connectors to allow units to be stacked and locked together. The poly-clip connector kit allows you to connect units side by side. There are many different configurations available.