All

Manufacturer: Haws, Manufacturer Part Number: 7655WCSMModel 7655WCSM wheelchair accessible surface mounted eye/face wash features the medically acclaimed AXION MSR eye/face wash head assembly (patent pending). The revolutionary inverted flow design is the only product on the market that provides a Medically Superior Response consistent with all EMT, emergency room and doctors' office protocols by sweeping contaminants away from the vulnerable nasal cavity. Traditional eyewashes irrigate from the outside edge of the eye back toward the nose, where contaminants can then be flushed into the nasal cavity through the lacrimal punctum, nature's ocular cavity drain. -Wall mount combination strobe light and alarm horn special available -Perfect for mounting on block or solid walls which cannot be cut into -Eye/face wash streams provide Zero Vertical Velocity™ stream engineering with even laminar flow for enhanced comfort, stability and effectiveness -Easy access exterior mounted in-line strainer -18 Gauge Type 304 Stainless Steel recessed cabinet is a deep-drawn heavy duty structure with smooth electro-polished finish -The eye/face wash head is easily activated by the emergency equipment's pull-down design -ANSI/ISEA Z358.1 tempering compliance options -Certified by CSA to meet the ANSI/ISEA Z358.1 Standard for Emergency Eyewash and Shower Equipment.

Manufacturer: Haws, Manufacturer Part Number : BP15Model BP15 is a versatile and decorative back panel for model 1920 that increases location visibility of the bottle filler, and also helps protect wall from inadvertent splash. This back panel is 15" x 17" (38 x 43 cm) stainless steel with a satin finish. BP15 and 1920 can be used with 1001, 1107 and 1109 series models.

Manufacturer: Haws, Manufacturer Part Number : BP15HPSModel BP15HPS is a versatile and decorative back panel for model 1920HPS that increases location visibility of the bottle filler, and also helps protect wall from inadvertent splash. This back panel is 15" x 15" (38 x 38 cm) stainless steel with a polished finish. BP15HPS and 1920HPS can be used with model 1001HPS and H1001.8HPS.

Manufacturer: Haws, Manufacturer Part Number : BP3Model BP3 is a versatile and decorative back panel that increases location visibility of the fountain and also helps protect wall from inadvertent splash. Model BP3 is 15" x 9" (38 x 23 cm) stainless steel with a satin finish. Used on 1105 and 1109 series models.

Manufacturer: Haws, Manufacturer Part Number : BP32Model BP32 is a versatile and decorative back panel for model 1920 bottle filler that increases location visibility, and also helps protect wall from inadvertent splash. This back panel is 32" x 9.5" (81 x 24 cm) stainless steel with a satin finish. BP32 can be used with model 1920 over 1011, 1117 and 1119 series dual fountains.

Manufacturer: Haws, Manufacturer Part Number : BP32HPSModel BP32HPS is a versatile and decorative back panel for model 1920HPS bottle filler that increases location visibility, and also helps protect wall from inadvertent splash. This back panel is 32" x 9.5" (81 x 24 cm) stainless steel with a polished finish. BP32HPS can be used with model 1920HPS over fountain models 1011HPS and H1011.8HPS.

Manufacturer: Haws, Manufacturer Part Number : BP32RModel BP32R is a versatile and decorative reversed mount back panel for model 1920 bottle filler that increases location visibility, and also helps protect wall from inadvertent splash. This back panel is 32" x 9.5" (81 x 24 cm) stainless steel with a satin finish, and allows the bottle filler to be mounted over the right side low portion of the fountain that has been reversed from left side low. BP32R can be used with model 1920 over 1011, 1117 and 1119 series dual fountains.

Manufacturer: Haws, Manufacturer Part Number : BP32RWModel BP32RW is a versatile and decorative reversed mount back panel for model 1920W bottle filler that increases location visibility of the bottle filler, and also helps protect wall from inadvertent splash. This back panel is 32" x 9.5" (81 x 24 cm) white painted stainless steel, and allows the bottle filler to be mounted over the right side low fountain portion of model 1501 which is reversed from the standard left side low.

Manufacturer: Haws, Manufacturer Part Number : BP32WModel BP32W is a versatile and decorative back panel for model 1920W bottle filler that increases location visibility, and also helps protect wall from inadvertent splash. This back panel is 32" x 9.5" (81 x 24 cm) white painted stainless steel, and is mounted over model 1501.

Manufacturer: Haws, Manufacturer Part Number : BP6HPSModel BP6HPS is a versatile and decorative back panel that increases location visibility of the fountain and also helps protect wall from inadvertent splash. It is a 15" x 9" (38 x 23 cm) high-polished stainless steel panel.

Manufacturer: Haws, Manufacturer Part Number : BP6Model BP6 is a versatile and decorative back panel that increases location visibility of the fountain and also helps protect wall from inadvertent splash. Model BP6 is 15" x 9" (38 x 23 cm) stainless steel with a satin finish.

Manufacturer: Haws, Manufacturer Part Number : BP7Model BP7 is a versatile and decorative back panel for Model 1107L that increases location visibility of the fountain and also helps protect wall from inadvertent splash. It is a 15" x 9" (38 x 23 cm) satin stainless steel panel.

Manufacturer: Justrite, Manufacturer Part Number: 24161This is a BACK SHELF CLIP for WOOD ACID CABINET.

Manufacturer: Valley Craft, Manufacturer Part Number: F84808A3Deep Frame Bag & Box Truck features a set of 6" swivel casters mounted on extended skid rails, allowing the truck to carry the entire weight of the load on the 10" x 19" rugged, steel shoe. Features 14–gauge, 11/8" O.D. steel tubing frame with form–fitted joints, and solid rubber tires. Handles up to 1000 lbs.SPECIFICATIONS42.5" x 25.5" x 37" - 95 lbs.

Manufacturer: Zing, Manufacturer Part Number: 7634 Adjustable ball valve lockout locks ball valve openings in the "on" or "off" position. The device is made out of durable nylon with a steel arm.

Manufacturer: Zing, Manufacturer Part Number: 7633 Adjustable ball valve lockout locks ball valve openings in the "on" or "off" position. The device is made out of durable nylon with a steel arm.

Manufacturer: Zing, Manufacturer Part Number: 7274 Large Steel Ball Valve Lockout locks most common ball valves in the "OFF" position. The maximum handle thickness is 25/64", and the maximum handle width is 1 31/32". The device features 15 holes for precise positioning of padlocks, with a maximum shackle diameter of 9/32".

Manufacturer: Zing, Manufacturer Part Number: 7670 Ball Valve Lockouts lock quarter-turn ball valves in the OFF position. The device accepts up to 6 padlocks and measures 6"H x 2"W x 0.5"D. Fits valves from 0.25" - 1". Durable steel construction.

Manufacturer: Parker Systems, Manufacturer Part Number: BT-P05/225TContainment at its Best! Containment booms are designed for emergency or long term deployment to contain petroleum products, debris and other floating material. Containment boom sections can be joined together with the included connectors. Custom sizes, lengths, materials and accessories are available. Give us a call for more information. Recommended for Shallow Streams & Creeks High Tensile Rip–Stop Fabrics Available in Bantam Boom Tote Bags (50' fits in each bag) Compact, Easy to Store, Easy to Deploy 22 oz. PVC Fabric, 50' Sections with Slotted Tube Connectors & 3/16" chain SPECIFICATIONS3" Float, 5" Draft - 45 lbs.1 boom50' Length

Manufacturer: Parker Systems, Manufacturer Part Number: BT-BAGContainment at its Best! Containment booms are designed for emergency or long term deployment to contain petroleum products, debris and other floating material. Containment boom sections can be joined together with the included connectors. Custom sizes, lengths, materials and accessories are available. Give us a call for more information. Recommended for Shallow Streams & Creeks High Tensile Rip–Stop Fabrics Available in Bantam Boom Tote Bags (50' fits in each bag) Compact, Easy to Store, Easy to Deploy 22 oz. PVC Fabric, 50' Sections with Slotted Tube Connectors & 3/16" chain SPECIFICATIONS5 lbs.1 tote bag

Experience unparalleled performance with the BAR CRADLE TRK 28X96 4 CRADLE 10K (Model BCT-2896-10K-95) manufactured by Durham. This heavy-duty cradle is engineered for safely and efficiently transporting heavy loads such as pipe, tubing, and bar stock. Expertly designed for use in industrial settings, it delivers reliability and durability, making it the perfect choice for operations that require precision and longevity.Key Features Dimensions: 28" width, 96" length, and approximately 30-1/4" in height. Load Capacity: Engineered to support up to 10,000 lbs. Construction: Built with robust, heavy-duty steel featuring a 7-gauge all-welded structure for enduring strength. Design: Incorporates 4 specially designed structural channel cradles with a diamond-patterned wheel layout and elevated cradles for secure forklift loading. Finish: Durable gray textured powder coating that withstands industrial wear. Assembly: Ships fully assembled, ensuring quick setup upon arrival. Efficient Handling & ShippingThis bar cradle improves operational efficiency by streamlining the secure movement of heavy materials. Specifically designed for industrial use, it meets rigorous safety protocols and compliance standards. Enjoy flexible shipping options, fast lead times, and full support for assembly upon delivery. For additional heavy-duty solutions, explore our Drum Truck and Cradle Collection and discover how Spill 911 Inc. can support your material handling and operational safety needs.

Manufacturer: Krueger Sentry, Manufacturer Part Number: B-55Barrel Gauge allows you to see how much is left in your vertical drums and is available for both 3/4" and 2" NPT bung openings.SPECIFICATIONS2 lbs.1 gauge.75" Bung Opening

Manufacturer: Krueger Sentry, Manufacturer Part Number: B-55-2Barrel Gauge allows you to see how much is left in your vertical drums and is available for both 3/4" and 2" NPT bung openings. SPECIFICATIONS1 lb.1 gauge2" Bung Opening

Manufacturer: Krueger Sentry, Manufacturer Part Number: B-30-2-S3The Barrel Gauge Type B is a reliable, swing arm type drum gauge used for measuring all types of liquid levels. Its simple mechanical design promotes durability, minimal upkeep, quick installation, and easy/inexpensive repairs. Standard Barrel Gauge Construction – Plastic Calibration, HDPE Lock Nut, Duro Nitrile Gasket, Aluminum Bushing, Galvanized Steel Rods, Nitrophyl Floats. This is a Barrel Gauge for a 30 gallon drum, 2'' NPT opening with stainless steel rods, floats and bushings, includes aluminum lock nut and glass calibration.